Panasonic Kx-Td816e, Kx-td1232e User Manual

4-22DPT Features
C4.2 DPT Features
Call Forwarding — Busy
You can forward calls to another extension when your extension is busy.
Setting
1. Lift the handsetor press the SP-PHONE/MONITORbutton.
2. Press theFWD/DND button.
• You may dial the feature number (710) instead.
3. Dial 3.
4.
Dial the extension numberto which you wish to forward the call.
• You hear a confirmation tone and then a dial tone.
• The display shows.
Extension number to which the
call is to be forwarded
• The FWD/DND indicator light...

DPT Features4-23
4.2DPT FeaturesC
Call Forwarding — No Answer
Your calls are forwarded to another extension when you do not answer the telephone
within a pre-determined time.
Setting
1.Lift the handset or press the SP-PHONE/MONITOR button.
2.Press the FWD/DND button.
•You may dial the feature number (710) instead.
3.Dial 4.
4.
Dial theextension numberto which you wish to forward the call.
•You hear a confirmation tone and then a dial tone.
•The display shows:
Extension number to which the
call is to be...

4-24DPT Features
C4.2DPT Features
FWD(B/NA)Extxxxx
1
4
extension number
2
3
FWD/DND
5
5
Call Forwarding — Busy / No Answer
You can forward your calls to another extension when your extension is busy or you do
not answer the call within a pre-determined time.
Setting
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) instead.
3.Dial 5.
4.
Dial the extension numberto which you wish to forward the call.
•You hear a confirmation tone and...

DPT Features4-25
4.2DPT FeaturesC
Call Forwarding — to CO Line
You can forward your incoming intercom calls to a CO line.  The telephone number of
the outside party must be pre-programmed.
Setting
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) instead.
3.Dial 6.
4.Dial the line access code(9 or 81 through 88).
5.Dial the phone numberto which you wish to forward the call.
6.Dial #.
•You hear a confirmation tone and then a dial...

4-26DPT Features
C4.2DPT Features
1
2
3
FWD/DND
5
7
4
your extension numberFWD(From)Extxxxx
Call Forwarding — Follow Me
You can set a “Call Forwarding”feature from the destination extension.  This is useful if
you forget to set “Call Forwarding — All Calls”before you leave your desk.
Setting
- at the destination extension;
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) instead.
3.Dial 7.
4.Dial your own extension number.
•You hear...

DPT Features4-27
4.2DPT FeaturesC
Call Forwarding — to ISDN Line
The call forwarding to ISDN line feature can be assigned to each extension.
There are the following three types:
– Call Forwarding Unconditional (CFU):All incoming calls to an extension are
transferred by the ISDN line.
– Call Forwarding No Reply (CFNR):An incoming call to an extension is transferred by
the ISDN line when the extension does not answer
before a time that a telephone company assigns.
– Call Forwarding Busy (CFB):An incoming...

4-28DPT Features
C4.2DPT Features
Conditions
•When an error occurs,the display shows as follows:
– when an error is caused by the system
– when an error is caused by the network
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — FWD/DND Button
•System Programming — Installation Manual
[518]CFU / CFB / CFNR Assignment
Not Valid
Not Accepted 

DPT Features4-29
4.2DPT FeaturesC
Call Forwarding — CANCEL
The cancellation depends on the Call Forwarding type that is assigned.  “Call
forwarding – to ISDN Line”feature can be cancelled only by the standard operation.
Cancelling Call Forwarding at your (original) extension (except “to ISDN Line”)
1.Lift thehandsetor press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) or press the flexible
button assigned as the FWD/DND button instead.
3.Dial 0.
•You hear...

4-30DPT Features
C4.2DPT Features
CFU Cancel
1
2
3
29
or
39
or
4
0
0
09
or
09
FWD/DND
Your MSN + #
4
5
Cancelling “Call Forwarding – to ISDN Line”at your (original) extension
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) instead.
3.Dial 920,930,940or 90.
– 920 :CFU
– 930 :CFB
– 940 :CFNR
– 90 :all
4.Dial your multi subscriber number(MSN) and press #.
•You hear a confirmation tone and then a dial tone.
•The display shows the...

DPT Features4-31
4.2DPT FeaturesC
Call Hold
Allows you to place an intercom or outside call on hold.
To place a call on hold
While having a conversation;
1.Press the HOLDbutton.
•The corresponding CO or INTERCOM indicator light
flashes green moderately.
•You hear a confirmation tone.
•You may replace the handset.
Retrieving a call on hold
-at the holding extension;
1.Press the COor INTERCOMbutton which is flashing green
slowly.
•The CO or INTERCOM indicator light turns steady green.
Conditions
•To...