Panasonic Kx-Td816e, Kx-td1232e User Manual

User Programming (Manager Programming)3-7
3.2User Programming (Manager Programming)
Date and Time Set000
NOTICE
It is assumed that you have read Section 3.1 “Programming Instructions.”The use of the soft buttons
is discussed in the section,therefore we will not make any reference to them in the following
instructions.  At any time the soft buttons can be used in place of the overlay keys.
DescriptionSets the current data and time.
Selection•Day:1 through 31
•Month:Jan.  through Dec.
•Year:00 through 99...

3-8User Programming (Manager Programming)
3.2 User Programming (Manager Programming) 
Date and Time Set 
(contd.)
000
11.Press NEXT.
Display example: 12:00 AM
12.Enter the hour.
To change the current entry,press CLEARand the new hour.
13.Press .
14.Enter the minute.
To change the current entry,press CLEARand the new minutes.
15.Press STORE.
16.Press END.
Conditions•After changing an entry,you can press STORE.  You do not have to
perform all of the rest of the steps.
•To go back to the previous...

User Programming (Manager Programming)3-9
3.2 User Programming (Manager Programming)
System Speed Dialling Number Set001
DescriptionUsed to program the System Speed Dial numbers.  These numbers are
available to all extension users.  The stored numbers are also applied to 
CO Incoming Call Information Display / Log features.
Selection• Speed dial number:000 through 499
• Telephone number:24 digits (max.)
DefaultAll speed dial numbers – Not stored
Programming1.Enter 001.
Display: SPD Number Set
2.Press...

3-10User Programming (Manager Programming)
3.2 User Programming (Manager Programming) 
System Speed Dialling Number Set 
(contd.)
001
–To store the feature number to convert pulse signals to DTMF
signals,press the # keys.
(Refer to the Installation Manual,Section 3 “Pulse to Tone
Conversion.”)
–To prevent the display of all or part of the number,press
SECRETbefore and after confidential parts of the number.  The
SECRETbutton must always be entered in a pair.  Or your
entry is not stored. (Refer to the...

User Programming (Manager Programming)3-11
3.2User Programming (Manager Programming)
System Speed Dialling Name Set002
DescriptionAssigns names to the system speed dial numbers assigned in program
[001] “System Speed Dialling Number Set.”The KX-T7235,KX-
T7431,KX-T7433 and KX-T7436 show the stored name during System
Speed Dialling.  The stored names are applied to the CO Incoming Call
Information Display / Log features.
Selection•Speed dial number:000 through 499
•Name:10 characters (max.)
DefaultAll...

3-12User Programming (Manager Programming)
3.2 User Programming (Manager Programming) 
Extension Number Set003
DescriptionAssigns an extension number to each extension.
Selection•Jack number:KX-TD816 – 01 through 16 (-1 / -2)
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part,-2 = second part)
•Extension Number:2 through 4 digits
DefaultKX-TD816 –Jack 01-1 through 16-1 = 201 through 216
Jack 01-2 through 16-2 = 301 through 316
KX-TD1232 –Jack 01-1 through 64-1 = 201 through 264;
Jack 01-2 through 64-2...

User Programming (Manager Programming)3-13
3.2User Programming (Manager Programming)
Extension Number Set 
(contd.)
003
•In case of KX-TD1232,Jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave,if available.
•An extension number is invalid if the leading first or second digits
disagree with the setting of the program [100] “Flexible Numbering,
1st through 16th hundred extension blocks.”If one digit is assigned as
the leading digit,some extensions have two digits and...

3-14User Programming (Manager Programming)
3.2 User Programming (Manager Programming) 
Extension Name Set004
DescriptionAssigns names to the extension numbers programmed in program [003]
“Extension Number Set.”
Selection•Jack number:KX-TD816 – 01 through 16 (-1 / -2)
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part,-2 = second part)
•Name:10 characters (max.)
DefaultAll jacks – Not stored
Programming1.Enter 004.
Display: EXT Name Set
2.Press NEXT.
Display: Jack NO?®
3.Enter a jack number.
To enter...

User Programming (Manager Programming)3-15
3.2User Programming (Manager Programming)
Extension Name Set 
(contd.)
004
Conditions• There is a maximum of 32 names for KX-TD816 and 128 names for
KX-TD1232.  Each name has a maximum of 10 characters.
•Program [003] “Extension Number Set”is used to assign extension
numbers.
•In case of KX-TD1232,Jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave,if available.
•For an explanation of jack numbering,see “Rotation of jack...

Section 4
DPT Features
Contents
4.1 Basic Operations ..................................................................
4-2
Making Calls.........................................................................4-2
Receiving Calls .....................................................................4-4
4.2 DPT Features (A - Z)...........................................................4-5
4.3 Operator Service Features ...............................................4-146
4.4 Special Display Features...