Panasonic Kx-Td816e, Kx-td1232e User Manual

4-12DPT Features
A4.2DPT Features
Programming References
•Station Programming (Section 2)
Charge Fee Reference —Account Code Charge Fee Reference 
Account Code Set
Flexible Button Assignment — Account Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
•System Programming — Installation Manual
[105]Account Codes
[508]Account Code Entry Mode
[601]Class of Service
Feature References
Station Message Detail Recording (SMDR) (®see Installation Manual)
Toll Restriction...

DPT Features4-13
4.2DPT FeaturesA
Alternate Calling — Ring / Voice
Allows you to select ring or voice calling when making an intercom call.  In Ring-
Calling mode,you can call the other party with a ring tone.  While in Voice-Calling
mode,you can talk to the other party immediately after a confirmation tone.
Soft Button Operation
Alternating (to Voice-Calling mode)
If the called extension is set to Ring-Calling mode,you hear a
ringback tone.
1.Press the Voice (S3) button.
•You hear a confirmation tone...

4-14DPT Features
A4.2DPT Features
•If the party you are calling is using a single line telephone (SLT),only Ring-Calling
mode is available.
Programming References
•Station Programming (Section 2)
Intercom Alerting Assignment
Feature References
Handsfree Answerback
Answering,Direct CO Line
Allows you to answer an outside call by pressing a CO button; you do not have to lift
the handset or press the SP-PHONE/MONITOR button.
To answer an incoming outside call
1.Press the CObutton which is flashing red...

DPT Features4-15
4.2DPT FeaturesA
Automatic Callback Busy (Camp-On)
When the selected CO line or extension you have dialled is busy,dial the camp-on
code and hang up.  Your telephone will ring when the selected CO line or the called
party becomes idle.
Soft Button Operation
Setting
If you make a call and hear a busy tone;
1.Press the C.BCK (S3) button.
•You hear a confirmation tone and then a reorder tone.
2.Hang upor press the SP-PHONEbutton.
•Wait until the telephone rings back.
Standard Operation...

4-16DPT Features
A4.2DPT Features
Answering a CO line recall
If you hear the telephone ringing;
•The display shows:

CO line number
1.Lift the handset or press the SP-PHONE/MONITORbutton.
•You hear a dial tone.
2.Dial the phone numberof the outside party.
Cancelling
1.Lift the handset or press the SP-PHONE/MONITOR button.
2.Dial the feature number(46).
3.Hang upor press the SP-PHONE/MONITORbutton.
Conditions
•If you do not answer before four callback ring signals (within 10 seconds),this
feature will be...

DPT Features4-17
4.2DPT FeaturesB
Background Music (BGM)
You hear background music through the built-in speaker of the telephone.  An external
music source,such as a radio,must be connected.  The music stops whenever a call
comes in or when you lift the handset.
Soft Button Operation
When the handset is on the cradle and the SP-PHONE button is off;
1.Press the BGM (S3) button.
•To turn off the BGM,press this button again.
Standard Operation
Setting / Cancelling
When the handset is on the cradle and the...

4-18DPT Features
B4.2DPT Features
Busy Station Signalling (BSS)
The busy extension that you called hears three beeps and knows that you are waiting.
Soft Button Operation
If you make an intercom call and hear a busy tone;
1.Press the BSS(S1) button.
•Wait for an answer and talk.
Standard Operation
If you make an intercom call and hear a busy tone;
1.Dial 2.
•Wait for an answer and talk.
Conditions
•To answer the signal from the calling extension,see “Call Waiting”in this manual.
•This feature is only...

DPT Features4-19
4.2DPT FeaturesC
Conditions
•To cancel Call Forwarding features,refer to “Call Forwarding — CANCEL”in this
manual.
•Call Forwarding can only be extended to one target telephone.  For example,
extension A is forwarded to extension B,and extension B is forwarded to extension
C.  A call to extension A is forwarded to the extension B,but the call would not be
forwarded to extension C.  Consequently,extension B is treated as the final
destination of Call Forwarding.
Call Forwarding — SUMMARY...

4-20DPT Features
C4.2DPT Features
•Setting a new “Call Forwarding”function (All Calls,Busy,Busy/No Answer,etc.)
cancels any other “Call Forwarding”functions and the “Do Not Disturb (DND)”
feature that has been set.
•A floating extension such as MODEM or external pager cannot be programmed as a
forwarding destination.
•Two extensions can set each other as the destination extension.  In this case,the
intercom call to the other party while he/she is absent will not be forwarded back to
the original...

DPT Features4-21
4.2DPT FeaturesC
Call Forwarding — All Calls
You can re-direct all of your calls to another extension.
Setting
1.Lift thehandsetor press the SP-PHONE/MONITORbutton.
2.Press the FWD/DNDbutton.
•You may dial the feature number (710) instead.
3.Dial 2.
4.Dial the extension numberto which you wish to forward the
call.
•You hear a confirmation tone and then a dial tone.
•The display shows:
Extension number to which the
call is to be forwarded
•The FWD/DND indicator light flashes red slowly....