Panasonic Kx-Td816e, Kx-td1232e User Manual

Station Programming2-27
2.2Station Programming
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible (CO) button as a Single-CO button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Flexible(CO) button which you wish to assign as an
S-CO button.
2.Dial 0.
•The display shows:
3.Enter the CO line numberas follows.
- 01 through 16:if you are connected to the KX-TD816
- 01 through 54:if you are connected to the KX-TD1232
•The display shows:
(— xx:CO...

2-28Station Programming
2.2Station Programming
Terminate Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as the Terminate button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button which you
wish to assign as the Terminate button.
2.Dial 9.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming...

Station Programming2-29
2.2Station Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
Two-Way Record Button (Assignment) †
Allows you to assign a Flexible (CO,DSS) button as a Two-Way Record button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which...

2-30Station Programming
2.2Station Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
Two-Way Transfer Button (Assignment) †
Allows you to assign a Flexible (CO,DSS) button as a Two-Way Transfer button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button...

Station Programming2-31
2.2Station Programming
Voice Mail (VM) Transfer Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as the VM Transfer button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button which you
wish to assign as the VM Transfer button.
2.Dial 82.
•The display shows:
3.Dial the extension number of the Voice Mail.
•The display shows:
(—xxxx:VM extension
number)
•To erase an incorrect entry,press...

2-32Station Programming
2.2Station Programming
Full One-Touch Dialling Assignment
Allows you to enable or disable the “Full One-Touch Dialling”function. “Handsfree
Operation”mode is activated by pressing an One-Touch Dialling button,a DSS button,a
REDIAL button or a SAVE button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 3.
•The STORE indicator light turns off.
•The display shows the current status.

(— When disabled)
2.Dial 1or 2.
- 1 :for selecting the off...

Station Programming2-33
2.2Station Programming
Intercom Alerting Assignment
Allows you to select the alerting mode (tone / voice) when receiving an intercom
(extension) call.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 4.
•The display shows the current status.
(—When Ring-Calling (Tone
Call) mode is selected)
(—When Voice-Calling mode
is selected)
2.Dial 1or 2.
- 1 :for selecting Ring-Calling (Tone Call) mode
- 2 :for selecting Voice-Calling mode
3.Press the...

2-34Station Programming
2.2Station Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
Live Call Screening Mode Set †
Assign whether an alert tone is sent (Private mode) or the recording message is monitored
through the built-in speaker (Hands-free mode),while incoming callers are leaving a
message.
—Be sure that you are in the...

Station Programming2-35
2.2Station Programming
Phantom Extension Bell On / Off Set
You can select whether or not the bell will ring when a call is received at a phantom
extension.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Phantom Extensionbutton.
2.Press the same Phantom Extensionbutton again.
3.Dial 1or 2.
- 1 :Ring off
- 2 :Ring on
4.Press the STOREbutton.
•The STORE indicator light turns on.
—To exit the Station Programming mode:Press [PROGRAM] or lift...

2-36Station Programming
2.2Station Programming
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming calls from the following three
line preferences:
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line (CO Line) Preference
Follow the appropriate programming procedure for your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook.  You must select a line to answer.
—Be sure that you are in the Station...