Panasonic Kx-Td816e, Kx-td1232e User Manual

Station Programming2-7
2.2Station Programming
Charge Fee Reference
Allows you to see,print out and clear charges.  Charges are displayed per extension,CO
line,account code,or the total of each can be referred to.  There are seven corresponding
features as follows:
1.)Extension Charge Fee Reference
2.)CO Line Charge Fee Reference
3.)Account Code Charge Fee Reference
4.)Total Extension Charge Fee Reference
5.)Total CO Line Charge Fee Reference
6.)Total Account Code Charge Fee Reference
7.)Account Code Set...

2-8Station Programming
2.2Station Programming
2.Enter the ID Code(4 digits).
•The display shows:
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 1.
4.Dial the extension numberor press the NEXT(S3) button
until the extension number will be designated.
•The display shows the meter.
 If you assign the extension number 201;
5.Press the SEL(S1) button.
•The display shows the charge in Pounds.

•
Pressing each button corresponds to the following operations:
— CLR(S2) button :To clear the meter...

Station Programming2-9
2.2Station Programming
CO Line Charge Fee Reference
Provides you with the display of each CO line charge (telephone rate).  You can print out
and clear the displayed meter and charge.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 2.
4.Dial the CO line number (01 through 08) or (01 through 24),
or press the NEXT(S3) button until the CO line number...

2-10Station Programming
2.2Station Programming
Account Code Charge Fee Reference
Provides you with the display of each account code charge (telephone rate).  You can
print out and clear the displayed meter and charge.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 3.
4.Dial the location number (01 through 40) or press the NEXT
(S3) button until the location number will...

Station Programming2-11
2.2Station Programming
Total Extension Charge Fee Reference
Provides you with the display of the total extension charge (telephone rate).  You can
print out and clear the displayed meter and charge.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•The display shows the meter.
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 4.
•The display shows the total extension meter.

4.Press the SEL(S1)...

2-12Station Programming
2.2Station Programming
Total CO Line Charge Fee Reference
Provides you with the display of the total CO line charge (telephone rate).  You can print
out and clear the displayed meter and charge.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•The display shows:
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 5.
•The display shows the total CO line meter.
 
4.Press the SEL(S1) button.
•The...

Station Programming2-13
2.2Station Programming
Total Account Code Charge Fee Reference
Provides you with the display of the total account code charge (telephone rate).  You can
print out and clear the displayed meter and charge.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•The display shows:
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 6.
•The display shows the total account code meter.
 
4.Press the SEL(S1)...

2-14Station Programming
2.2Station Programming
Account Code Set
Allows you to assign the account code.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Dial 8.
2.Enter the ID Code(4 digits).
•The display shows:
•To erase an incorrect entry,press the CLR (S2) button.
3.Dial 7.
4.Dial the location number(01 through 40) or press the NEXT
(S3) button until the location number will be designated.
•If the account code has not been assigned,the display
shows “Not Stored.”
5.Press...

Station Programming2-15
2.2 Station Programming
Flexible Button Assignment
Each Flexible (CO, DSS, PF) button on your telephone and on the console can be
assigned as various feature buttons such as an Account Button, DSS Button, or
FWD/DND Button, etc..
The features assignable are limited by the button type.  Please refer to “Flexible
Buttons” in Section 1.1, “Feature Buttons.” “Flexible CO Button Assignment” in System
Programming (program address [005]) can be used for this assignment.
Account Button...

2-16Station Programming
2.2Station Programming
Alert Button (Assignment)
Allows you to assign a Flexible (CO) button as an Alert button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO) button which you wish to
assign as an Alert button.
2.Dial 87.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the...