Panasonic Kx-Td816e, Kx-td1232e User Manual

DPT Overview1-13
1.1Configuration
Usage
AUTO ANSWER/MUTE Button
Used for extension auto answer; or it turns the microphone off during a conversation.
AUTO DIAL/STORE Button
Used for System Speed Dialling or storing program changes.
CONF (Conference) Button
Used to establish a three-party conference.
FLASH/RCL Button
Sends an Register Recall signal to the central office or host PBX to access their system
features.  If a PBX is not being used,this button can be used to disconnect the current
call and start...

1-14DPT Overview
1.1Configuration
MONITOR Button
Used for a handsfree dialling operation.
PAUSE Button
Inserts a pause in speed dial numbers or in one-touch dial numbers.
PROGRAM Button
Used to enter and exit the Programming mode.
With the KX-T7220 and KX-T7250,it can also be used as the PAUSE button.
RECALL Button
Sends an Register Recall signal to the central office or host PBX to access their system
features.  If a PBX is not being used,this button can be used to disconnect the current
call and start...

DPT Overview1-15
1.1Configuration
Flexible Buttons
Flexible Buttons do not have specific features permanently assigned to them.  Features
are assigned to Flexible Buttons through System or Station Programming.  “Flexible
Button Assignment”is addressed in Station Programming (Section 2).  The three types of
Flexible Buttons are as follows:
• Flexible CO buttons(located on PT only)
• Flexible DSS buttons(located on DSS Console only)
• Programmable Feature (PF) buttons(located on DSS Console,KX-T7240,only)...

1-16DPT Overview
1.1Configuration
Line Access Buttons
The following three types of CO buttons must be used to seize an CO line when making a
call.
• Group-CO (G-CO) button
• Loop-CO (L-CO) button
• Single-CO (S-CO) button
Conditions
•A flexible CO button can be assigned as a Line Access Button (G-CO,L-CO or S-CO)
in either System/Station Programming.  Once a flexible CO button is assigned as a Line
Access Button,it provides the line status condition by lighting patterns and colour
indication.  Please...

DPT Overview1-17
1.1Configuration
Loop-CO (L-CO) button
All CO lines can be assigned to a flexible CO button on a proprietary telephone.  The
assigned button serves as an L-CO button.  An incoming call on any CO line arrives at
the L-CO button,unless there are S-CO or G-CO buttons associated with the line or
unless the button is already in use.  To make an outside call,you simply press the
dedicated L-CO button.  Pressing the L-CO button provides the same operation as
dialling an automatic line access...

1-18DPT Overview
1.1Configuration
Initial Settings for the KX-T7400 Series
The Jog Dial can be used for the display contrast and the volume control.  Rotate the Jog
Dial in either direction as desired.  The contrast or the volume level will change as
follows.
Display Contrast Adjustment 
The MODE button and the Jog Dial for KX-T7431 users,and a Soft button and the Jog
Dial for KX-T7433 and KX-T7436 users are used to adjust the display contrast.  The
contrast level is indicated on the display.
– KX-T7431...

DPT Overview1-19
1.1Configuration
When using the headset
The Panasonic Digital Super Hybrid System supports the use of a headset with a
proprietary telephone (PT).  When you use the headset (optional),you should switch the
selection mode first.  Selection is explained in the “Handset/Headset Selection”in Station
Programming (Section 2).
To change to the headset mode
Press:[PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM].
Changing the ringing tone of CO Buttons / Intercom calls
There are eight ringer...

1-20DPT Overview
1.1Configuration
To adjust the headset volume
Be sure the headset is connected.
1.Press the SP-PHONE button.
2.Rotate the Jog Dialin the desired direction.
•The display shows:

(— volume level 3)
To adjust the ringer volume
– KX-T7433 and KX-T7436
While the telephone is ringing
1.Rotate the Jog Dialin the desired direction.
•The display shows:

(— volume level 3)
While the telephone is idle and on-hook
1.Press the RING(S2) button.
•The telephone will ring.
2.Rotate the Jog Dialin the...

DPT Overview1-21
1.1Configuration
– KX-T7420 and KX-T7425
1.Adjust the RINGER Volume Selector lever to the desired
setting(OFF/LOW/HIGH).
To adjust the speaker volume
1.Press the SP-PHONE button.
2.Rotate the Jog Dialin the desired direction.
•The display shows:

(— volume level 12)
•You may also adjust the speaker volume while listening to
background music (BGM On mode),receiving a voice call,
or receiving a page.
Conditions
•If the ringer volume of the KX-T7431 is set to OFF,the display while on-hook...

1-22DPT Overview
1.1Configuration
Initial Settings for the KX-T7200 Series
Display Contrast Adjustment (KX-T7230 and KX-T7235 only)
A Soft button and the VOLUME Control button are used to adjust the display contrast.
The contrast level is indicated on the display.  You can adjust the contrast level under the
following conditions:
1.) When on-hook,or
2.) During an outside/intercom call.
1.Press the CONT(S1) button.
2.Press the VOLUME(UP / DOWN ) Control button.
•The display shows:

(— contrast volume...