Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

12643aSystem Programming
Caller ID Modification for Local Call
DescriptionAssigns removed digits from the received caller’s number of a local
call, and adds number to make the final number which serves as the
Caller 
ID number. The system records the modified caller’s
number to the incoming call log list so that the extension user can
call back the caller.
Digits are removed from or added to the beginning of the received
digits.
Selectionl Number of digits to be deleted: 0 through 9 (O=no deletion)
l...

System Programming
127Caller ID Modification for Long Distance Call
DescriptionAssigns removed digits from the received caller’s number of a long
distance call, and adds number to make the final number which
serves as the Caller ID number. The system records the modified
caller’s number to the incoming call log list so that the extension
user can call back the caller.
Digits are removed from or added to the beginning of the received
digits.
Selection
Default
Deleted number - 0; Added number - 1...

12843lSystem Programming
Internal Caller ID Extension Assignment
DescriptionAssigns the extension which can receive the Caller ID service from
the Central Office. The extension should be a single line telephone
which has the Caller ID feature.
SelectionExtension number: 2 through 4 digitsDefault
Not Stored
Programming1.
2.
3.
4.
5.
Enter 128.Display: 128 CID EXT
Press NEXT.Display example: CID: Not Stored
Enter an extension number.
To delete the extension number, press CLEAR.
To change the current entry,...

43lSystem Programming
129Facsimile Transmission Extension
DescriptionAssigns the extension which can receive the facsimile data when
the system receives a facsimile transmission signal by Direct
Inward System Access (DISA).
SelectionDefault
Programming
Extension number: 2 through 4 digits
Not Stored
1.
2.
3.
4.
5.
Enter 129.Display: 129 FAX 
TFWNS
Press NEXT.Display example: FAX: Not Stored
Enter an extension number.
To delete the extension number, press CLEAR.
To change the current entry, press CLEAR...

20044lTimer Programming
Hold Recall Time
DescriptionAssigns the length of the hold &call timer. This timer is used to
alert an extension that a call has been held for an extended period
of time.
SelectionTime (seconds): 0 through 240 @Hold Recall disabled)
Default60s
Programming1.Enter 200.Display: 200 HOLD RECALL
2.Press NEXT.Display example: Time: 60 
set
3.Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.Press STORE.
5.Press END.
Conditionsl Select “0” if Hold Recall...

440Timer Programming
201
Transfer Recall Time
DescriptionSets the number of rings before transfer recall occurs. If a
transferred call is not answered after the programmed number of
rings, the call returns to the original caller.
SelectionNumber of rings: 0 through 48 (O=Transfer Recall disabled)
Default
12 rings
Programming1.Enter 201.Display: 201 TRAN RECALL
2.Press NEXT.Display example: 
Time:12 rings
3.Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of...

202440Timer Programming
Call Forwarding - No Answer Time
DescriptionSets the number of rings for Call Forwarding - No Answer feature.
If a call is not answered after the programmed number of rings, the
call is forwarded to the destination.
SelectionDefault
Programming
ConditionsNumber of rings: 1 through 12
3 rings1.
2.
3.
4.
5.
Enter 202.Display: 202 CALL FWD-NA
Press NEXT.Display example: Time: 3 rings
Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of...

440Timer Programming203
Description
SelectionDefault
Intercept Time
Sets the number of rings for Intercept Routing - No Answer
(IRNA) feature. If a call is not answered after the programmed
number of rings, the call is redirected to the programmed station.,
Number of rings: 3 
through 48
12 rings
Programming1.
2.Press NEXT.
3.
4.
5.
Enter 203.Display: 203 INTERCEPT
Display example: 
Time:12 rings
Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of rings.
Press...

20444aTimer Programming
Pickup Dial Waiting Time
DescriptionSets the number of seconds for Pickup Dialing.If the telephone
user lifts the handset, the programmed party is called when the time
expires.
SelectionTime (seconds): 1 through 5Default
Programming
1s
1.
2.
3.
4.
5.
Enter 204.Display: 204 PICKUP DIAL
Press NEXT.Display example: 
Time:1 set
Enter the time.
To change the current entry, enter the new time.
Press STORE.
Press END.
Conditionsl This time gives the user an opportunity to dial digits...

440Timer Programming205
Extension-to-Outside Line Call Duration Time
DescriptionSets the maximum time allowed for a conversation with an outside
party. If an outside call is originated or answered by a programmed
extension user and the timer expires, the call is disconnected.
SelectionDefault
Programming
Conditions
Time (minutes): 1 through 64
10min
1.Enter 205.Display: 205 EXT-CO TIME
2.Press NEXT.Display example: 
Time:10 min
3.Enter the time.
To change the current entry, press CLEAR and enter the new...