Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

218440Timer Programming
DISA AA Wait Time
DescriptionSets the number of seconds the system waits for a second digit
entry.If the timer expires, the system assumes that the first digit is
a DISA built-in auto attendant number if assigned in program 
[8 151
“DISA Built-in Auto Attendant”.
SelectionTime (seconds): 1 through 5
Default1 set
Programming1.Enter 218.Display: 218 DISA AA WAIT
2.Press NEXT.Display example: 
Time:1 set
3.Enter the time.
To change the current entry, enter the new time.
4.Press...

44
lTimer Programming219
Call Park Recall Time
DescriptionSets the number of rings before call park recall occurs.Call park
recall is used to alert an extension that a call has been parked for an
extended period of time.
SelectionDefault
Programming
Number of rings: 0 through 48 (O=Call Park Recall disabled)
12 rings
1.Enter 219.Display: 219 PARK RECALL
2.Press NEXT.Display example: 
Time:12 rings
3.Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of rings....

300450TRS / ARS Programming
TRS Override for System Speed Dialing
DescriptionAllows you to enable toll restriction override for System Speed
Dial Numbers. If this is enabled, all extension users can make
System Speed Dialing calls with no restriction.
SelectionEnable / DisableDefault
Disable
Programming1.Enter 300.Display: 300 TRS SPEED DL
2.Press NEXT.
Display example:0verride:Disable
3.Keep pressing SELECT until the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsSelect “Enable”...

45lTRS / ARS Programming301-30s
TRS Denied Code Entry for Levels 2 through 6
DescriptionThese allow you to specify the numbers which are toll-restricted for
each toll restriction level as follows:
Program 
[301]: restricts levels 2 through 6
Program 
[302]: restricts levels 3 through 6
Program 
[303]: restricts levels 4 through 6
Program 
[304]: restricts levels 5 through 6
Program 
[305]: restricts level 6
Selectionl Location number: 01 through 20
l Toll call number: 10 digits (max.)
DefaultAll...

306-310 4.5TRS / ARS Programming
TRS Excepted Code Entry for Levels 2 through 6
DescriptionThese allow you to assign numbers which are exceptions to the toll
restriction specified in programs 
[301] through [305] as follows:
Program 
[306]: applies to level 2
Program 
[307]: applies to levels 2 through 3
Program 
[308]: applies to levels 2 through 4
Program 
[309]: applies to levels 2 through 5
Program 
[310]: applies to levels 2 through 6
Selection
Default
All locations - Not stored
Programming1.Enter a...

45lTRS / ARS Programming311
Special Carrier Access Codes
Description
Selection
Default
All locations - Not stored
Programming1.Enter 311.
Assigns special carrier numbers. This allows the system to
recognize the user-dialed special carrier number in order to insert
the necessary pause and to apply toll restriction.
l Location number: 01 through 20
l Special carrier number: 7 digits (max.)
Display: 311 CARRIER #
2.
3.
4.
5.
6.
Press NEXT.
Display:Location NO?+
Enter a location number.
To enter location...

312450TRS / ARS Programming
ARS Mode
:
DescriptionAllows you to turn on or off the Automatic Route Selection (ARS)
mode. ARS, if enabled, selects the least expensive route to be used
for an outside call.
SelectionOn/Off
Default
Off
Programming1.
2.
3.
4.
5.
Enter 312.Display: 312 ARS MODE SET
Press NEXT.Display example: 
AFLS:Off
Press SELECT until the desired selection is displayed.
Press STORE.
Press END.
Conditionsl If “Off’ is selected, the Automatic Line Access feature functions
instead of ARS.
l...

450TRS / ARS Programming313
ARS Time
DescriptionAssigns times for the four ARS time schedules. It is possible to
split a day into four time zones (maximum) so that the least
expensive line is selected for that time. According to the service
hours and charges offered by your carriers, enter the starting time of
each zone.
Selectionl Day of the week: 1 (Mon) / 2 (Tue) / 3 (Wed) / 4 (Thu) /
DefaultAll days of the week : A - 8:00 AM; B - 5:OO PM; C - 9%) PM;
D 
- Disable
Programming1.Enter 313.
5 (Fri) / 6...

31345lTRS / ARS Programming
ARS Time (c0ntd.j
Conditionsl Enter a starting time for each time schedule. Select “Disable” for idle
schedules.
l You cannot leave an entry empty.
l To assign all days of the week, press the 96 key in step 3. In this case,
the display shows the contents programmed for Monday.
Feature ReferencesSection 3, Features
Automatic Route Selection (ARS)4-84System Programming 

45lTRS I ARS Programming314-321
ARS Leading Digit Entry for Pkzns 1 through 8,^. .
DescriptionBy entering numbers into each leading digit plan (programs below)
you are starting the process to determine which outside line will be
used to route the call.Program: 
[314] [315] [316] [317] [318] [319] [320] [321]
Plan:1 2 3 4 5 6 7 8
These eight plans are used to analyze the number which the user
dials and decide the route plan for the call.If the user-dialed
number is registered in Plan 1, then Routing Plan...