Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

50647lCOS Programming
Executive Busy Override Deny
DescriptionThis program is used to determine which Classes of Services (COS)
are allowed to deny Executive Busy Override. Executive Busy
Override Deny allows the user to prevent Executive Busy Override
- Extension / Outside Line from being executed by another
extension user.
Selectionl COS number: 1 through 8, * ( % =all COS)
l Disable / Enable
DefaultAll COS - Enable
Programming1.
2.
3.
4.
5.
6.
7.
8.
Enter 506.Display: 506 EXEC BSY DNY
Press...

470COS Programming507Do Not Disturb Override
DescriptionThis program determines which Classes of Services (COS) are
allowed to perform Do Not Disturb (DND) Override.
Selectionl COS number: 1 through 8, * (* =all COS)
l Disable / Enable
DefaultAll COS - Disable
Programming1.
2.Press NEXT.
3.
4.
5.
6.
7.
8.Enter 507.
Display: 507 DND OVERRIDE
Display: COS NO?+
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
Keep pressing SELECT until the desired selection...

508470COS Programming
Account Code Entry Mode-i ,.
DescriptionThere are three account code modes: Option, Verified-All Calls and
Verified-Toll Restriction Override. This program determines the
mode to be used by each Class of Service (COS).
Option mode:The user can enter any account code, if needed.
Verified - All Calls mode:
The user must always enter a preassigned account code to make an
outside call.
Verified - Toll Restriction Override mode:
The user must enter a pre-assigned account code when the...

48aExtension Programming600
Extra Device Port
DescriptionExtra Device Port (XDP) allows a standard telephone to be
connected to the same jack as a digital proprietary telephone
(DPT). This program assigns which jacks are XDP. The standard
telephone and DPT of the programmed jack work as independent
extensions.
Selectionl Jack number: 1 through 8, * (* =a11 jacks)
DefaultAll jacks - Disable
Programming1.Enter 600.
Conditions
l Disable / Enable
Display: 600 XDP PORT
2.Press NEXT.Display: Jack NO?+
3.Enter...

60148lExtension Programming
Clizss of Service
DescriptionPrograms each extension for Class of Service (COS). The COS
determines the call handling abilities of each extension.
Selectionl Jack number: 1 through 8, * (-1 / -2),
(* =a11 jacks, -1= first part, -2 = second part)
l COS number: 1 through 8
DefaultAll jacks-l/2 - COS 1
Programming1.Enter 601.
2.Press NEXT.
3.
4.
5.
6.
Enter a COS number.
To change the current entry, enter the new number.
Press STORE.
7.
To program anotber jack, press NEXT or...

480Extension Programming602
.
Extension Group Assignment
DescriptionAssigns each extension to an extension group. Extension groups
are used for Group Call Pickup, Station Hunting, and Paging 
-
Group.
Selectioni Jack number: 1 through 8, * (-1 / -2),
( * =a11 jacks, -1= fist part, -2 = second part)
l Extension group number: 1 through 8
DefaultAll jacks- l/2 - Extension group 1
Programming1.Enter 602.
Display: 602 EXT GROUP #
2.Press NEXT.Display: Jack NO?+
3.Enter a jack number.
To enter jack number 1,...

603-60448lExtension Programming
DIL 1:N Extension and Delayed Ringing- Day /Night
DescriptionA DIL 1 :N line can be assigned to ring more than one extension.
All incoming calls from the programmed outside lines are directed
to the specified extensions. These programs assign the extensions
and the notification method for each outside line in both day and
night modes.
Selectionl Jack number: 1 through 8, * (-1 / -2),
( * =a11 jacks, -1 = first part, -2 = second part)
l Outside line (CO) number: 1 through...

48lExtension Programming603-604
.,
DIL I:N Extension and Delayed Ringing -Day / Night (contd.)
8.Repeat steps 4 through 7.
9.Press END.
Conditionsl An extension can be assigned as the destination of as many outside lines
as required.
l For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
l To assign all jacks or all outside lines to one selection, press the * key
in step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 1 or for outside line 1.
l...

405-606 48Extension Programming
Outgoing Permitted Outside Line Assignment -Day / Night
Determines the outside lines which can be accessed by an extension
in both day and night modes. The extension users can make
outgoing outside calls using the assigned outside lines.
l Jack number: 1 through 8, * (-1 / -2),
( * =all jacks, -1 = first part, -2 = second part)
l Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l Enahl (enable) / Disab (disable)
All jacks-l/2 
- all outside lines - Enable -...

Extension Programming605606
Outgoing Permitted Outside Line Assignment - Day /Night (COWL)
Conditions. For an explanation of jack numbering, see “Rotation of jack
number” on page 4-7.
l To assign all jacks or all outside lines to one selection, press the * key
in step 3 or 4.In these cases, the display shows the contents
programmed for Jack 1 or outside line 1.
l To assign no outside line for an extension, press CLEAR in step 4.
Feature’ ReferencesSection 3, Features
Outside Line Connection Assignment -...