Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

9904.10 Optional Programming
System Additional Information (contd.)
Explanation for Area 2 (contd)
SelectionDefault 1 ReferencesDescription
Determines the initial display of a digital
large display proprietary telephone 
(KX-
T7235) in Station Speed Dialing.
Determines the source of Music Source 1 for
Music on Hold and BGM. Internal music
source is not available for your system.
Field
(19)
(20)
0 : names
1: numbers0
Special Features
of the m-T7235
- Station Speed
Dialing
l Background
Music (BGM)
l...

.4.10 Optional Programming
System Additional Information (contd.)
990
Explanation for Area 5
Description
Selection1 Default 1References
(30)Enables or disables the automatic time0 : enable1Caller ID
adjustment by Caller ID information once a
1 : disable
day by the first call received after 3:OOAM.
(31)Have an option to restrict the DISA outside-0 : 10 times1Direct Inward
to-outside line extending time. 10 attempts
1 : no limitation
System Access
are allowed.
(DISA)
(32)Enables or disables retry by...

9904.10 Optional Programming
System Additional Information (contd)
Explanation for Area 5 (contd)
Field
(39)
(40)
(41)
(42)
(43)
WI
(45)
Description
Determines the result when pressing the
FLASH button during an outside call (When
Field 3=0).
Flash: Disconnects and accesses the same
outside line.
Selects the message waiting ring type: 3
quick rings or 2 normal rings, for standard
telenhones.
Terminate: Terminates the outside line and
accesses the intercom. It is
convenient to route the outside
call...

4.10 Optional Programming990
System Additional Information (contd)
SelectionlArea code: 01 (area 1) / 02 (area 2) / 03 (area 3) / 04 (area4)/
05 (area 5) / 06 (area 6)l
Field number : 1 through 46l
Selection: See “Selection” on pages 4- 144 through 4- 148.
DefaultSee “Default” shown above.
Programming1.Enter 990.
Display: 990 SYS ADD DATA
2.Press NEXT.
Display: Area NO?-+
3.Enter an area code (01 through 06).
Display example: 0010100011000001
4.Keep pressing e or + to move the cursor to the desired...

9914.10 Optional Programming
COS Additional Zqformation
Description(1) Sets the number of digits allowed to dial out during an outside call
on a Class of Service (COS) basis.If an outside party hangs up and
the extension user tries to dial out still on the outside line, the
system will disconnect the line at the time the assigned digits are
dialed. This program can be added if the CPC Signal Detection is
not provided by the outside line.
The Field (1) shown below is used to enter your selection.
(2)...

4.10 Optional ProgrammingCOS Additional Information (contd.)
991
Conditions
Feature References
5.Enter your selection (0 or 1).
To change the current entry, press STORE and the new selection.
6.To program another field, repeat steps 4 and 5.7. Press STORE.
8.To program another COS, press SELECT and the desired
COS number.
9.Repeat steps 4 through 8.10. Press END.
None
Section 3, Features
Call Forwarding 1 Follow Me
Calling Party Control (CPC) Signal Detection
Class of Service (COS)
.
System...

Section 5
List
This section lists the tone, ring tone and default values of
system programming.
. 

51lTone / Ring Tone

Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Confirmation Tone 4
Dial Tone 1
Dial Tone 2
Dial Tone 3
Dial Tone 4
Busy Tone
Reorder Tone
Ringback Tone 1
Ringback Tone 2
Do Not Disturb (DND)
Tone
Outside-to-Outside Line
Call Limit Warning Tone
.
5-2List 

51lTone / Ring Tone

Hold Alarm
Call Waiting Tone 1
(outside/intercom)
Call Waiting Tone 2
(outside)
Call Waiting Tone 2
(intercom)

Outside Calls /
Outside Call Hold Recall
Intercom Calls 
/
Intercom Hold Recall
Doorphone Calls 
/
Timed Reminder
Callback Ringing(Camp-on Recall)
.
List5-3 

52lDefault Values
CO 1 through 3, Others = Not Stored;
Ring tone type 2
[006]Operator / Manager ExtensionOperator l=Jack 1;
Assignment
Operator 2 and Manager=Unassigned
[OOS] Absent Messages1: Will Return Soon; 2: Gone Home;
3: At Ext %%; 4: Back at 
%%:%%;
5: Out Until 
%%/%%; 6: In a Meeting;
7 through 9: Not Stored
[009]Quick Dial Number SetNot Stored
System Programming
[ lOO]Flexible NumberingSee page 4-3 1 and 4-32.
[ 
1011Day / Night Service Switching Mode Manual
[ 1021Day / Night Service Starting...