Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

314-321 4~TRS / ARS Programming
ARS Leading Digit Entry for Pkzns 1 through 8 (contd)
ConditionsEach number has a maximum of ten digits, consisting of 0 through 9, and
* .The character “X ” can be used as a wild card character (i.e., “do not
care” digit). The system scans all the ARS Leading Digit Plans
simultaneously from left to right. The scan ends as soon as the dialed
number matches a table entry. When using a wild card character, it is
important to use one in each digit position that must be...

45aTRS / ARS Programming322-329
ARS Routing Plans 1 through 8
Description
Selection
Default
All time schedules - Not stored
Programming1.Enter a program address (322 through 329).
Display example: 322 ARS ROUTE 1
Assigns the outside line and modification plan to be used for
each route plan and time schedule.Program: 
13221 [323] [324] [325] [326] [327] [328] [329]
Plan:1 2 3 4 5 6 7 8
l Time schedule: A / B / C / D
l Outside line number: 1 through 3
l Modification table number: 1 through 8
2.
3.Press...

322-329 4~TRS / ARS Programming
ARS Routing Plans 1 through 8 (contd.)
Conditionsl Up to three outside lines and modification plans can be assigned for
each time schedule. The outside line number and modification table
number must be entered together. The highest priority outside line
number and modification table number is entered first (left to right).
l Programs [330] “ARS Modify Removed Digit” and [331] “ARS
Modify Added Number” are used to make up the eight Modification
Tables.
Feature...

450TRS / ARS Programming330
ARS Modifj Removed Digit
DescriptionDetermines how the dialed number should be modified before
transmitting to the central 
offke. You can delete the digits from the
beginning of the dialed number.
Selectionl Modification table number: 1 through 8
l Number of digits to be deleted: 0 through 9 (O=no deletion)
DefaultAll modification tables - 0
Programming1.
2.
3.
4.
Enter the number of digits to be deleted.
5.
To change the current entry, enter the new number.
Press STORE.
6.To...

331450TRS / ARS Programming
ARS Mod@ Added Number-.,
DescriptionDetermines how the dialed number should be modified before
transmitting to the central 
office. Assigned numbers are added to
the beginning of the dialed number.
Selectionl Modification table number: 1 through 8
l Number to be added: 20 digits (max.)
DefaultAll modification tables - Not stored
Programming1.Enter 331.
Display: 331 AFLS ADD #S
2.Press NEXT.
Display: Modify Table?+
3.Enter a modification table number.
To enter table number 1,...

450TRS / ARS Programming332
Extra Entry Table Selection
,’
DescriptionSelects the code table which enables an extra 400 entries within
Denied or Except Code Table.
Selection. Deny / Exceptl Level number: 2 through 6
Default,Except - 2
Programming1.
2.
3.
4.Press W to enter a level number.
5.Enter a level number.
6.
7.Enter 332.
Display: 332 TRS EXTRA +
Press NEXT.
Display example: Table:Except-2Keep pressing SELECT until the desired selection is
displayed.
Display‘ example: Table:Except-3
Press STORE....

333450TRS / ARS Programming
TRS Entry Code Assignment.for Extra Table
DescriptionThis program allows you to specify the numbers for extra Denied
or Excepted Code Table for expansion.
Selectionl Location number: 001 through 100
l Toll call number: 10 digits (max.)Default
All locations - Not stored
Programming1.
2.
3.
4.
5.
‘6.
7.
8.
Conditions
Enter 333.
Display: 333 TRS EXTRA -
Press NEXT.
Display: Location NO?+
Enter a location number.
To enter location number 001, you can also press NEXT.
Display...

45lTRS / ARS Programming334
Emergency Dial Number Set
DescriptionStores up to ten emergency call numbers.
Emergency numbers are not subject to toll restriction, Account
Code 
- Verified mode or Electronic Station Lockout.
Selectionl Location number: 01 through 10
l Emergency number: 7 digits (max.)
DefaultLocation 01 = 911, Other location = Not stored
Programming1.
2.
3.
4.
5.
6.
7.Repeat steps 4 through 6.
8.Press END.
Enter 334.
Display: 334 EMERGENCY #
Press NEXT.
Display: Location NO?+
Enter a...

400 46Outside Line Programming
Outside Line Connection Assignment
DescriptionUsed to identify the outside lines which are connected to the
system. This prevents users from originating a call to a line which
is not connected.
Selectionl Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l Connect / No Connect
DefaultAll outside lines - Connect
Programming1.
2.
Enter 400.
Display: 400 CO CONNECT
Press NEXT.
Display: CO Line NO?+
3.Enter an outside line number.
4.
5.
6.
7.
8.
To enter &side...

46lOutside Line Programming402
Dial Mode Selection
DescriptionEach outside line can be programmed for DTMF, p.ulse (rotary) or
call blocking. This program assigns your choice to each line.
DTMF: The dialing signals from an extension, either tone or pulse, are
converted to tone signals and transmitted to the outside line.
Pulse: The dialing signals from an extension, either tone or pulse, are
converted to pulse signals and transmitted to the outside line.
Call blocking: If your central office can receive...