Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

008Manager Programming
SelectionDefault
Absent Messages
DescriptionUsed to program the absent messages. An absent message, if set by
the station user, is displayed on the calling extension’s telephone to
show the reason for the user’s absence.
l Message number: 1 through 9
l Message: 16 characters (max.)
1: Will Return Soon
2: Gone Home
3: At Ext %%
4: Back at %%:%%
5: Out Until 
%%/%%
6: In a Meeting
7 through 9: Blank (not stored)
Programming1.Enter 008.
Display: 008 ABSENT MSG.
2.Press NEXT.Display:...

42
lManager Programming
008Absent Messages (contd.)
Conditionsl There is a maximum of nine messages. Messages 1 through 6 are
programmed at the factory but can be changed. Each message has a
maximum of 16 characters.
l You can enter a maximum of seven “%” characters per message which
can be programmed at each user’s extension. The station user can enter
0 through 9, * and # for the % characters. If the user enters digits less
than the number of “%,, characters, it is recommended to fill the
remaining...

009420Manager Programming
Quick Dial Number Set
Description
SelectionStores up to eight quick dial numbers.
l Location number: 1 through 8
l Desired number: 16 digits (max.)
DefaultAll location numbers - Not stored
Programming1.
2.
3.
4.
5.
6.Press STORE.To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7.Repeat steps 4 through 6.
8.Press END.
Enter 009.Display: 009 QUICK DIAL
Press NEXT.Display: Location NO?+
Enter a location number.
To enter location number 1,...

System Programming100Flexible Numbering
DefaultSee “Feature Number List” on pages 4-3 1 and 4-32.
Programming1.Enter 100.
DescriptionAssigns the leading digits of extension numbers and feature
numbers for system features.
Selectionl Selection number: 01 through 71 (See “Feature Number List” on
pages 4-3 1 and 4-32 for the corresponding
features.)
l Feature number: 1 or 2 digits (for selection numbers 01 through
16);
1 through 3 digits (for selection numbers 17
through 7 1)Display: 100 FLEX. NUMBER
2....

100430System Programming
Flexible Numbering (contd.)
Conditions
2.Press NEXT.
3.Enter 00.Display: All Feature CLR?
4.Press STORE.
5.Press END.
l Each extension block has one or two digits, consisting of 0 through 9.
Assign the leading digits for extension numbers of the respective
blocks.
l Assignment of extension blocks defines the limits for programs [003]
“Extension Number Set” and [8 131 ‘Floating Number Assignment”.
l Each feature number has one through three digits, consisting of 0
through 9, * ,...

43lSystem ProgrammingFlexible Numbering (contd.)
100Feature Number List
Number
FeatureDefault
011 st hundred extension block1
022nd hundred extension block203-16
3rd through 16th hundred extension blockNoneI 17 I Operator call
I 0 II 18
1Automatic line access / ARSI 9 I
I 19
1 Outside line access1 8 1I 20 I Svstem sneed dialingI* I
I 21
I Station sneed dialing:I 3* I
22Station speed dialing programming30
23Doorphone call31C)AI-L.,:,,,w.r,-.-.l‘1Q
25
26
--o---o -~-~~~~~-
Paging - external answer / TAPAS...

10043l
Flexible Numbering (contd.)Feature Number List (contd)
NumberFeatureDefault
54LCS Dassword799
55
Call log, incomingI56
56
Call log lock, incoming57
57Timed reminder, remote7*
58Log-in / log-out45
59
Automatic callback busy cancel46
60Walking COS47
61ReservedNone
62System working report
794
63 - 70Quick dial location numbers l-8None
71ReservedNone4-32System Programming 

430System Programming101Day /Night Service Switching Mode
DescriptionThis program is used to determine if night mode is set
automatically or manually.
SelectionManual / Auto (automatic)
DefaultManual
Programming1.Enter 101.Display: 101 DAY/NT AUTO
2.Press NEXT.
Display example: D/N Mode:Manual
3.Keep pressing SELECT until the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditionsl If automatic switching is assigned, day / night mode is switched at the
time programmed in [ 
1021 “Day /...

10243aSystem Programming
Day / Night Service Starting. Time
DescriptionSets the starting time on a day of the week basis, when automatic
day 
/ night switching is programmed in program [ 1011 “Day / Night
Service Switching Mode”.
Selection
Default
Every day of the week - Day - 9:00 AM / Night - 500 PM
Programming1.Enter 102.
l Day of the week selection number:
1 (Sunday) ! 2 (Monday) / 3 (Tuesday) / 4 (Wednesday) /
5 (Thursday) / 6 (Friday) / 7 (Saturday) / * (every day of the
week)
l Hour: 1 through 12...

System ProgrammingDay /Night Service Startkg Time (contd.)102
8.
9.
10.
11.
12.Press SELECT for AM or PM.
Press STORE.To program another day 
/ night mode or day of the week,
press NEXT or PREV, or SELECT and the day of the week
selection number.Repeat steps 4 through 10.
Press END.
Conditionsl To select the desired day, you may keep pressing NEXT in step 3. To
assign every day of the week to one selection, press the x key in step
3. In this case, the display shows the contents programmed for Sunday.
l...