Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

3FeaturesT
TOII Restriction Override for System Speed Dialing
DescriptionAllows you to cancel Toll Restriction in System Speed Dialing.
Normally, calls originated by System Speed Dialing are restricted
depending on the extension’s toll restriction level. Once this
function is activated, it permits all extension users to make System
Speed Dialing calls without restrictions.
ConditionsNone
Programming References
Section 4, System Programming
[300] TRS Override for System Speed Dialing
Feature...

T3Features
Trunk (Outside Line) Answer From Any Station (TAFAS)
DescriptionA tone signal is sent through the external pager when an incoming
outside call is received. Any extension user can answer the call.
Conditionsl Connect a user-supplied external paging device. One external pager
cau be installed.
l A floating number of a pager is programmable.
l TAFAS can be used in the following cases:
a) The floating number of an external pager is assigned as the DIL
1: 1 destination. In this case all incoming...

FeaturesT
Two-way Recording into Voice Mail?
DescriptionAllows the proprietary telephone user to record a conversation into
one’s mailbox or another mailbox, while talking on the phone.
Note:When you record Two-Way telephone conversations, you should
inform the other party that the conversation is being recorded.
Use the Two-Way Record button to record into your own mailbox.
Use the 
‘Lvo-Way Transfer button to record into someone else’s
mailbox.
Conditionsl A flexible CO button can be assigned as a...

Features
Uniform Call Distribution (UCD)
DescriptionAllows incoming calls to be distributed uniformly to a specific
group of extensions called an UCD group. Calls to an 
ZJCD group
hunt for an idlestation in a circular way.
This UCD feature is
particularly helpful when a certain extension receives a high
volume of calls compared with other extensions.
If all extensions in an UCD group are busy or not available, the
incoming outside call will be handled by 
the UCD Time Table.
An outline sketch of UCD is...

3Featuresu
Conditionsl UCD can be used in the following cases:
a) The floating number of UCD is assigned as the DIL 1: 1 destination.
b) The floating number of UCD is assigned as the Intercept Routing
destination.
c) The floating number of UCD is dialed from an extension.
d) The floating number of UCD is dialed from DISA.
l This feature requires assignment of an UCD group in System
Programming. An extension cannot belong to two or more UCD
groups.
l The floating number can be assigned on an UCD group...

uFeatures
User Programming (Manager Programming)
DescriptionUser Programming (Manager Programming) can be programmed
by the end user. Programs [000] through 
[009] can be changed by
the user.
ConditionsNone
Programming References
User Programming(Manager Programming) . . . . . . . . . . . . . . . User Manual
Feature ReferencesNone
Operation References Not applicable.
3-166Features 

FeaturesV
Voice Mail Integration
DescriptionThis system can accommodate Voice Processing System (VPS)
equipment, which offers the user Voice Mail and Automated
Attendant Services. If an extension user has set the Call
Forwarding destination to the VPS, the calling party will be
forwarded to the VPS and can leave a voice message in the mailbox
of the extension. When a call is transferred to the VPS by Call
Forwarding or Intercept Routing 
- No Answer features, the
mailbox number is sent to the VPS...

VFeatures
Outside Call
DIL l:l, DISA
System
VPS
I]ExtensionCfwD *y-t -------- ,y”1’
:VMHunting :
pi&-k
ChainI
---------&J
1.2 Intercept Routing to VM
If an outside line is set as Intercept Routing - No Answer
(IRNA) whose destination is the VPS, an outside call is
forwarded to the VPS under the proper conditions. The
system sends to the VPS a mailbox number of the
corresponding extension at that time. Therefore the calling
party can leave his 
/ her message in the mailbox of the
desired extension without...

FeaturesV.
1.3 Ikansferring to VM
The extension user can transfer an outside call to the VPS so
that calling party can leave his 
/ her message in the mailbox
of the desired extension. The extension user should use the
Voice Mail (VM) Transfer button, when transferring a call to
the VPS. Pressing this button and entering the extension
number allows the extension user to transfer the call to the
mailbox of the corresponding extension.
Outside Call
i-’
System
busy/no answer
VPS
1.4 Changing from VM to...

VFeatures
DIL l:l, DIL l:N, DISA
VPS
1.5 Listening to a Recorded Message
If the VPS receives a message, the VPS can turn on the
MESSAGE button indicator of the corresponding telephone
as notification to the user of the telephone.(Panasonic 
KX-
TVS series can do this.) The VPS notifies the extension user
that there is a message waiting in his 
/ her mailbox. When
the MESSAGE button indicator is lit, pressing the button
allows the extension user to play back the stored message.2. Automated Attendant (AA)...