Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

3Features0
Outgoing Message (OGM)
DescriptionAllows the extension assigned as an operator or manager to recordan outgoing voice message. This message is played when a caller
accesses the DISA feature.
After recording the message, the operator or manager can also play
it back for confirmation.
Conditionsl A Caller ID / DISA / FAX Detection Card is required to program the
OGM.
l The maximum recording time for OGM is 16 seconds.
Connection References
Section 2, Installation
2.4.2 4-SLT Extension Expansion...

03Features
Outside Line Connection Assignment
DescriptionThis allows you to specify the outside lines connected to your
system which prevents an extension user from originating an
outside call by selecting a line which is not connected.An idle line
is selected from the connected ones when an extension user makes
an Automatic Line Access.
Conditionsl If the user tries to make a call with a disconnected line, a reorder tone
sounds to indicate that 
the line is out of use.
l This is effective for all...

FeaturesP
PAGING FEATURES 
- SUMMARY
DescriptionPaging allows you to make a voice announcement to many people
at the same time. Your message is announced over the built-in
speakers of proprietary telephones and 
/ or external speaker
(external pager). The paged person can answer your page from a
nearby telephone. Making and answering a page is possible from
either a proprietary or standard telephone. You can do paging with
a call on hold in order to transfer the call (Paging and Transfer).
Paging...

PFeatures
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Paging - All
Paging 
- ANSWER
Paging and Transfer
Paging - External
DescriptionAllows you to make a voice announcement using an external
paging device (external pager). One pager can be connected. Any
telephone user can answer your Paging 
- External.
Conditionsl Previous connection of an external pager is required.
l External pagers can be used for TAFAS, Paging - External, or
Background Music (BGM) 
- External in this...

3FeaturesP
Paging - Group
DescriptionAllows you to select an extension group and make a voice
announcement. All the proprietary telephones in the group will
receive the page. If a member of the paged group answers your
paging, you can talk to the person through the connected line.
Conditionsl To select all groups page all extensions.
l A confirmation tone is sent when the page is made or answered
Eliminating the tone is programmable.
Programming References
Feature References
Operation References-User...

PFeatures
Paralleled Telephone
DescriptionAny proprietary telephone can be connectedin parallel with a
standard telephone. The following two combinations of telephones
are available:
(l)APT + Standard Telephone (an analog proprietary
telephone and a standard telephone/device)
(2)DPT + Standard Telephone (a digital proprietary telephone
and a standard telephone/device)
When a parallel connection is made, an extension user can make
and answer a call using either telephone.
Conditionsl The proprietary...

FeaturesP
Programming References
Section 4, System Programming
[ 1 001Flexible Numbering, Parallel telephone mode
Feature ReferencesSection 3, Features
Extra Device Port (XDP)
Operation ReferencesDPT Features, Standard Telephone Fiatures-User Manual
Paralleled Telephone Connection
Pause Insertion, Automatic
DescriptionThis function is used to insert a pre-assigned pause between the
outside line access number, the host PBX, 
Centrex or carrier access
code and dialed digits.
Conditionsl This feature...

P3FeaturesPhantom 
Extension
DescriptionAllows the system to route calls to a phantom extension.A call to
a phantom extension arrives at extensions that have the
corresponding Phantom Extension button. A Phantom Extension
button can be assigned by Station Programming.
Conditionsl Iypes of calls whose destination can be the phantom extension are:
Outside calls - DIL 1:l; DISA; IRNA
Intercom calls - Extension; Transfer
l You can call the phantom extension by pressing the Phantom Extension
button or by...

3FeaturesP
Pickup Dialing
DescriptionAllows an extension user to make an outgoing call by going off-hook, if the user has previously stored the telephone number. This
feature is also known as Hot Line.
Conditionsl A rotary dial telephone without the “#V’ button cannot program this
feature. For programming the phone number, temporarily replace a
rotary dial telephone with a pulse telephone with the 
“##” button.
l The user uses a feature number to activate or deactivate pickup dialing.
l If the feature is...

PFeatures .;
Power Failure Restart
DescriptionWhen turning back on the electricity, the system restarts the stored
data automatically. Before restarting, the system records the error
log if necessary.
Conditionsl In the event of a power failure, system memory is protected by a
factory-provided lithium battery. There is no memory loss except the
memories of Camp-On and Call Park.
Programming References
No programming required.
Feature ReferencesNone
Operation References Not applicable.
3-120Features