Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

3FeaturesF
Floating Station
DescriptionYou can assign virtual extension numbers for resources to make
them appear as extensions. These numbers are defined as floating
numbers (FN). The following resources can have floating numbers:
(1) External paging instruments: used for TAFAS feature.One 
FN is available.
The FN can be assigned as:
a) 
DIL 1: 1 destination
b) DISA destination
c) Intercept Routing destination
(2) Extension groups: used for Station Hunting feature.
Eight 
FNs are available.
These 
FNs...

F3Features
Full One-Touch Dialing
DescriptionAllows the proprietary telephone user to make a call or have access
to a system service with one button. There is no need to turn the
SP-PHONE 
/ MONITOR button on before pressing the button,
which is required for One-Touch Dialing. The handsfree operation
is automatically provided by pressing an One-Touch Dialing button,
DSS button, 
REDIAL button or SAVE button.
Conditionsl It is necessary to program automatic handsfree dial mode.
l This feature is also...

FeaturesH
Handset / Headset Selection
DescriptionThe system supports the use of headsets on proprietary telephones.
Conditionsl The headset is an user supplied item.
l To set headset mode on a digital proprietary telephone (PT), use Station
Programming. To set headset mode on an analog PT, use the handset 
/
headset selector provided on the set and / or on the headset.
Programming References
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

H3FeaturesL,
Handsfree Answerback
DescriptionAllows the speakerphone telephone user to talk to a caller without
lifting the handset, if the user has set handsfree answerback mode.
If the user receives an intercom call in this mode, handsfree
conversation is established immediately after the user hears a beep
tone and the caller hears a confirmation tone.
Conditions9 Handsfree answerback mode is set or canceled by pressing the AUTO
ANSWER button.
l ‘Ibis feature does not work for calls from outside...

FeaturesH
Handsfree Operation
DescriptionAllows the proprietary telephone user to dial and to talk to the other
party without lifting the handset. Pressing an appropriate button
provides handsfree mode.
Conditionsl This function can be utilized by pressing a button listed below when the
SP-PHONE 
/ MONITOR button indicator is off:
SP-PHONE button; MONITOR button; INTERCOM button; CO button
l The RX-T7050 and the RX-T7250 can be used for handsfree dialing
operations, etc., but cannot be used for a...

H3Features
Hold Recall
DescriptionPrevents a call on hold from being kept waiting longer than a pre-
determined time. If the timer expires, ringing or an alarm tone is
generated as a reminder to the user who held the call. If the user is
on-hook and its speaker-phone is off, the phone will ring. If the
user is off-hook or in speakerphone mode when the timer expires,
an alarm tone is sent from the built-in speaker of a proprietary
telephone (PT) or from the handset receiver of a standard telephone
at...

FeaturesH
Host PBX Access
DescriptionThe system may be installed behind an existing host PBX. This is
performed by connecting a line from the host to an outside line in
the Digital Super Hybrid System.
Conditionsl To enable Host PBX Access, put the host PBX line in au outside line
group. The user accesses the host PBX by selecting that outside line.
l A Host PBX Access Code is required to access outside lines of the host
PBX.
l A pause, if programmed, can be inserted between the user-dialed Host
PBX...

I3Features
Intercept Routing
DescriptionProvides automatic redirection of incoming cutside calls. There are
two types of Intercept Routing. In the first case, a call cannot be
placed on the called party. This is called Rerouting. In the secondcase, the call is not answered within a programmed time period.
This is called Intercept Routing - No Answer (IRNA).
Conditionsl Intercept Routing applies to DIL 1: 1, DIL 1 :N, DISA, TAFAS, Call
Forwarding, and Station Hunting.
l The final destination of...

Features
Intercom Calling
DescriptionAllows the extension user to call another extension user within the
system.
Conditionsl Extension numbers are assigned to all extensions by System
Programming. An extension number is programmed to be two, three, or
four digits.
l Names can be given to extension numbers by System Programming.
An extension number and a name, if programmed, is shown on the
display PT during an intercom call.
l DSS buttons permit one-touch access to an extension and provide Busy
Lamp...

Features
LED Indication, Intercom
DescriptionThe LED (Light Emitting Diode) indicator of the INTERCOM
button indicates the line condition with a variety of lighting
patterns. This allows the user to see the current state of the
intercom line. The table below shows the lighting patterns and the
intercom line conditions.
INTERCOM ButtonIntercom Status
Off
Idle
Intercom call / Conference established
Incoming intercom 
/ doorphone call
ConditionsNone
Programming References
No programming required.
Feature...