Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

,,.3FeaturesP
Power Failure Transfer
DescriptionConditionsIf a power failure should happen, or during a system-off-line state,
a specific extension telephone instrument is automatically
connected to a specific outside line. This provides outside line
conversation between the following extension and outside line:
CO 1 is connected to extension jack number 1
A standard telephone can work in case of a power failure. Connect
a standard telephone to the above extension jack.
l All other conversations except...

PFeaturesPrivacy, Automatic
DescriptionBy default all conversations established on outside lines, extension
lines and doorphone lines have privacy activated.
ConditionsAutomatic privacy may be temporarily released for a three-party
conference, which is established either by Executive Busy Override or
Privacy Release.
Programming References
No programming required.
Feature ReferencesSection 3, Features
Executive Busy Override -
Outside Line
Operation References Not applicable.
Privacy Release
Executive...

3FeaturesP
Pulse to Tone Conversion
DescriptionThis feature allows the extension user to change from pulse dial to
tone (DTMF) dial so that the user can access special services such
as computer-accessed long distance calling or voice mail services.
Conditionsl ‘Ibis feature works only on outside lines set to Pulse Dialing mode or
Call Blocking mode.
l Dial Type Selection provides selection of a dial mode for each outside
line.
l This feature is unavailable to DISA callers.
l Changing tone to pulse is not...

3Features.
Quick Dialing
DescriptionQuick Dialing offers the extension user one-touch access to a
desired party. This is enabled by storing an extension number or a
telephone number up to 16-digits as a quick dial number.
Conditionsl Up to eight quick dial numbers can be.stored.
l For example, Quick Dialing is convenient for room service calls in a
hotel.
l You must assign a feature number first in program [ 1001 “Flexible
Numbering”, and then a quick dial number in program 
[009] “Quick
Dial Number Set”...

FeaturesR
RediaI, Automatic
Description
ConditionsThis is a special feature for proprietary telephones, that provides
automatic redialing of the last dialed number, saved number or call
log number, if the called party is busy. If the Last Number Redial,
Saved Number Redial or Call Log operation is performed
handsfree, the telephone set will hang up and try again after a pre-
determined period of time.
l Redial Repeat Time and Interval Time can be changed by System
Programming.
l Pressing FLASH allows the...

RFeatures
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Last number redial
Feature ReferencesSection 3, Features
Redial, Automatic
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Redial, Last Number
Redial, Saved Number
DescriptionAllows the proprietary telephone user to save a telephone numberand redial the number afterwards. The user can store it while in
conversation on an outside line. The saved number can be redialed
until another number is...

FeaturesR
Remote Station Lock Control
DescriptionThe operator and manager are given the privilege of controlling
Electronic Station Lockout on any station.
ConditionsRemote Station Lock Control is superior to Electronic Station Lockout.
If Station Lockout has already been set by the extension user and Remote
Station Lock is set by the operator or manager, canceling the lock is only
possible by the operator or manager.
Programming References
No programming required.
Feature ReferencesSection 3, Features...

R3Features
Ring Group
DescriptionAll extensions in a ring group ring simultaneously by dialing the
floating number of the extension group.A ring group can be a
Station Hunting type.
Conditionsl Types of calls whose destination can be the ring group are:
Outside calls 
- DIL 1: 1; DISA; IRNA
Intercom calls 
- Extension; Transfer
l The floating number of the extension group is used for all other hunting
types, Circular, Termination, Voice Mail (VM), Automated Attendant
(AA) and Uniform Call Distribution...

3FeaturesR
Ringing, Discriminating
DescriptionAllows the extension user to identify the incoming call by the
ringing pattern. (See Section 5.1 “Tone 
/ Ring Tone”.)
Conditiqnsl When there are multiple incoming calls and the extension goes from
off-hook to on-hook, the calls are rung according to the following
priority:
c 1 > Consultation Hold Recall
c2> An incoming call from a line in which the Prime Line
Preference 
- Incoming function has been set (with a
proprietary telephone only)
c3> Call Waiting...

RFeatures
Ringing Tone Selection for CO Buttons
DescriptionAllows the digital proprietary telephone user to select the desired
ringer frequency for each CO button. This distinguishes different
incoming outside calls.
ConditionsThere are eight ringer frequencies available.One of them can be assigned
to a CO button that is assigned as each of the following buttons: 
Single-
CO or Loop-CO button. It is not possible to assign a ringer frequency to
any other button.
Programming References
Section 4, System...