Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

Features
DIL l:l, DIL l:N, DISA
f
iAA Hunting ;
Conditionsl To activate this feature with a XX-TD308 connected to one of the
following 
VPSs, specific programming is required.
rModelI Software Version I
XX-TVs100up to VA2250
XX-TVs75up to VB2230
RX-TVs200UD t0 VC2100
1) Assign 
RX-TD8 16 as the PBX type for the VPS.
2) The number of digits for the mailbox number and extension number
must be the same (default: the mailbox number 
- three digits, the
extension number 
- two digits).If they do not match,...

V3Features
l The Voice Mail extension should be set to Data Line Security to achieve
proper recording.
l The Voice Mail extension can execute the Busy Station Signaling (BSS)
function to the ringing extension.
Connection References
Section 2, Installation
2.3.3 Extension Connection
Programming References
Common
For VM ServiceSection 4, System Programming
[106] Station Hunting ‘l@e (Select Voice Mail Hunting.)
[990] System Additional Information, Field (35)
For AA ServiceSection 4, System Programming
[...

3FeaturesV
Voice Mail Integration for Digital Proprietary Telephoned
DescriptionA Digital Proprietary Telephone capable Panasonic Voice
Processing System can be connected to a Digital Super Hybrid
System (DSHS) in a tightly integrated fashion.
The system sends the VPS data which contains 
the extension
number configuration information and the VPS automatically
.creates mailboxes with this data (Automatic Configuration -Quick Setup).
Conditionsl A maximum of one VPS can be connected to each DSHS cabinet....

V3Features
volume Control - Speaker / Handset Receiver / Headset / Ringer
DescriptionAllows the proprietary telephone user to change the following as
desired:Handset receiver volume
Headset volume
Ringer volume
Speaker volume
ConditionsThe control method depends on the telephone type:
l With a digital proprietary telephone, press the volume control button
(VOLUME 
A / v Up / DOWN) to select a desired volume level.
However the ringer volume of RX-T7220 and RX-T7250 is selected
with Ringer Volume Selector...

3FeaturesW
walking cos
DescriptionAllows a user who is not at their own telephone to use all of the
COS functions of their extension. At another extension, the user
dials the walking COS password, and for the duration of the call,
the COS of the extension is changed to the COS of their own
extension.
ConditionsNone
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Walking COS
[ 
1211 Walking COS Password
[601] Class of Service
Feature ReferencesSection 3, Features
Class of...

Section 4System Programming
This section provides step-by-step programming instructions
for a proprietary telephone. 

41
lGeneral Programming Instructions
Default Setting
This system has a default factory setting.If any of the
programming needs to be changed, you will find the necessary
information in Section 3, “Features”. This makes the system very
simple to install and customize as required by the customer. Any
required changes can be written in “Programming Tables”.
Required Telephone Set
One of the following telephone sets is required for System
Programming:
l Digital Proprietary Telephone (DPT): KX-T7235,...

4.1.1 Using Proprietary Telephones
Soft Buttons and SHIFT Button on the Display DPT
Three soft buttons are provided just below the display on the
display of Digital Proprietary Telephones (DPT). The functions of
these soft buttons vary as the programming procedures advance
step by step. Those functions that are currently assigned to the
buttons are shown on the lower line of the display. (See “Viewing
the Display” on page 4-6 for more information on the display
lines.)
If the SHIFT button indicator is...

4.1.1 Using Proprietary Telephones1Srpe 4
I’IIDIIIUZI
Soft1soft2Soft3SHIFTSoft1Soft2Soft3SHIFT
Press SHIFT
to alternate
00Iln
soft 1Soft 2Soft 3 SHIFTSoft 1Soft 2Soft 3 SHIFT
You can use either the soft buttons or the overlay buttons.
(For
overlay buttons, refer to “Using the Overlay” below.)
Throughout programming you will see instructions such as “Press
PREV”. If you use soft buttons, this means press SHIFT, release
SHIFT and then press Soft 3. The (PREV) function is performed.
NoteIf you use soft...

4.1.1 Using Proprietary TelephonesDuring Normal Operation
(PAUSE)
(SP-PHONE)
(REDIAL)
(AUTO ANSWER 
/ MUTE)
(FLASH)
(TRANSFER)
(FWD/DND)
(CONF)
(INTERCOM )
(AUTO DIAL 
/ STORE)
(HOLD)
Location of Controls with the OverlayDuring Programming
PAUSE 
/ PROGRAM
NEXT
PREV 
(PREVIOUS)
SELECT
FLASH
CLEAR
*
-I e
SECRET
STORE
END
The pictures below show the functions of the buttons of the KX-
T7235 and KX-T7230 while in programming mode.
mmmmmm
mmmmmm
mmammmII-111111111
SECRET 
- + *PAUSE CLEAR
L
KX-T7230KX-T7235...