Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

000420Manager Programming
Date and Time Set (contd.)’
9.Keep pressing SELECT until the desired day of the week is
displayed.10. Press STORE.
11. Press NEXT.
Display example: 12:OO PM 24
12.Enter the hour.
To change the current entry, press CLEAR and enter the new hour.13. Press 
* .
14.Enter the minute.
To change the current entry, press CLEAR and enter the new minute.15. Press 
* .
16.Press SELECT for AM or PM.17. Press 
* .
18.Press SELECT for 12 or 24 (clock hour).19. Press STORE.
20. Press END....

42aManager Programming001
System Speed Dialing Number Set
DescriptionUsed to program the System Speed Dial numbers. These numbers
are available to all extension users. There are 100 numbers from 00
to 99.
Selectionl Speed dial number: 00 through 99
l Telephone number: 24 digits (max.)
DefaultAll speed dial numbers - Not stored
Programming1.Enter 001.Display: 001 SYS SPD DIAL
2.Press NEXT.Display: SPD Code?+
3.Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.Display...

001420Manager Programming
System Speed Dialing Number Set (contd.)
- To store a feature number to convert pulse signals to DTMF
signals, press the 
* and # keys.
(Refer to Section 3 “Pulse to Tone Conversion”.)
- To prevent displaying of all or part of the number, press SECRET
before and after the confidential parts of the number, or your entry
is not stored. (Refer to Section 3 “Secret Dialing”.)
l If you are storing an external number, include the line access code (9,
81 through 83) before the number....

42
lManager Programming002
System Speed Dialing Name Set
DescriptionAssigns names to the system speed dial numbers assigned in
program 
[OOl] “System Speed Dialing Number Set”. The large
display telephone 
(RX-T7235) shows the stored name during
System Speed Dialing.
Selection
Default
Programmingl Speed dial number: 00 through 99
l Name: 10 characters (max.)All speed dial numbers 
- Not stored
1.Enter 002.
2.
Display: 002 SYS SPD NAME
Press NEXT.
3.Display: SPD Code?+Enter a speed dial number.
To enter...

00342
lManager Programming
Extension Number Set.
DescriptionAssigns an extension number to each extension.
Selectionl Jack number: 1 through 8 (-1 / -2)
(-1 = first part, -2 = second part)
l Extension Number: 2 through 4 digitsDefault
Jack l-l through 8-l = 11 through 18;
Jack l-2 through 8-2 = 21 through 28
Programming1.Enter 003.
Display: 003 EXT NUMBER
2.Press NEXT.
Display: Jack NO?+
3.Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part 
(-2), press NEXT...

42
lManager Progrtimming003
Extension Number Set (contd.)
Conditionsl There is a maximum of 16 extension numbers. Each extension number
can be two, three, or four digits, consisting of 0 through 9. The Jc and
#keys cannot be used.
l An extension number is invalid if the first or second digits do not match
with the program 
[lOO] “Flexible Numbering, (01) - (16) 1st through
16th hundred extension blocks” setting. If one digit is assigned as the
leading digit, some extensions have two digits and some have...

00442
lManager Programming
Extension Name Set
DescriptionAssigns names to the extension numbers programmed in program
[003] “Extension Number Set”.
Selectionl Jack number: 1 through 8 (-1 / -2)(-1 = first part, -2 = second part)
l Name: 10 characters (max.)
DefaultAll jacks - Not stored
Programming1.Enter 004.Display: 004 EXT NAME SET
Conditions
2.Press NEXT.Display: Jack NO?+
3.Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering...

42a
Description
Selection
DefaultManager Programming
005
Flexible CO Button Assignment
Used to determine the use of the flexible CO buttons on proprietary
telephones from a centralized telephone.
l Jack number: 1 through 8
l Button Code (plus parameter, if required):
All jacks 
- CO buttons 1 through 3 = Single-CO 1 through 3;
Ring tone type 2
Others = Not stored
Programming1.Enter 005.
Display: 005 FLEXIBLE CO2.
Press NEXT.Display: Jack NO?+
3.
Enter a jack number.To enter jack number 1, you can also...

00542
lManager Programming
Flexible CO Button Assignment (contd.)
Canceling
4.
5.
6.
7.
8.
1.
2.
3.
4.Press the CO button which is changed to another button.
The display shows the contents pre-assigned to the button.
Display example: CO-1Enter a button code (plus parameter, if required).
To change the parameter, press CLEAR and enter the new parameter.
Press STORE.l To program another CO button of the same jack, repeat
steps 4 through 6.
l To program another jack, press SELECT and repeat steps 3
through...

42
lManager Programming
006Operator /Manager Extension Assignment
DescriptionAssigns the jack number for a manager and/or operators. The
manager extension can perform System Programming and manager
services. The operators have the ability to perform operator
services.
Selection
Default
Programming
Conditionsl OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)
l Jack number: 1 through 8Operator 1 
- Jack 1;
Operator 2 and Manager 
- Not stored
1.
2.
3.
4.
5.
6.
7.Enter 006.
Display: 006 OP-1, 2,...