Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

3FeaturesS
Station Programming
DescriptionAllows the proprietary telephone (PT) user to customize the
extension to their needs. The following programming items are
available:
For the PT (RX-T7220; RX-T7230; RX-T7235; RX-T7250; KX-
T7 130; RX-T7020; RX-T7030; RX-T7050)
Call Waiting Tone Type Assignment
Flexible CO Button Assignment
Full One-Touch Dialing Assignment
Intercom Alert Assignment
Preferred Line Assignment 
- Incoming / Outgoing
Station Programming Data Default Set
For digital PT (RX-T7220;...

S3Features
Station Programming Data Default Set
DescriptionAllows the proprietary telephone user to return all the following
items programmed on the telephone to default setting.Programming Items
Bilingual Display Selection
Call Waiting Tone 
Type Assignment
Full One-Touch Dialing Assignment
Handset 
/ Headset Selection
Initial Display Selection
Intercom Alert Assignment
Live Call Screening Mode Set
Preferred Line Assignment 
- Incoming
Preferred Line Assignment 
- OutgoingDefault
English Display
Tone 1...

Features
Station Speed Dialing
DescriptionAllows an extension user to store frequently dialed numbers in
order to place a call with abbreviated dialing. It is performed by
dialing the feature number and a speed dial number from 0 through
9. Up to 10 numbers can be stored in each telephone.
Conditionsl Station Speed Dialing can be followed by manual dialing to supplement
the dialed digits.
l You may make a call with One-Touch Dialing button, instead of Station
Speed Dialing.
l The standard telephone may...

S
System Data Default Set
3Features
DescriptionThis system permits re-initialization of system-programmed data.
If all the programmed data is cleared, the system will restart with
the default setting.
ConditionsThe default setting for each programming item is listed in Section 5.2,
“Default Values”.
Programming References
Section 4, System Programming
[900] System Data Clear
Feature ReferencesNone
Operation ReferencesSection 2, Installation
2.9 System Data Clear3-144Features 

3FeaturesS
System Programming with Proprietary Telephone
DescriptionThis system can be programmed with a proprietary telephone (PT).
Proprietary telephones available for System Programming are: 
KX-T7235; KX-T7230; KX-T7 130; and 
a-T7030 (Display
Proprietary Telephones).
Two extensions are allowed to perform System Programming. The
available extensions are:
(1) An extension that is connected to jack 1.
(2) An extension that is assigned as a manager.
For more information and programming instructions,...

SFeatures.,
System Speed Dialing
DescriptionThis feature supports 100 abbreviated dial numbers that are
available to all users. A system speed dial number is dialed out by
pressing the 
AUTO button and a 2-digit code (00 through 99). It is
possible to store one hundred 24-digit telephone numbers per
system (maximum).
Conditions. Overriding Toll Restriction for System Speed Dialing can be activated
or deactivated by system programming.
@?or proprietary telephone users only]
l Speed Dialing, One-Touch...

FeaturesS
System Working Report
DescriptionThe Digital Super Hybrid System automatically records the
system’s working status condition. A printer connected to the
Serial Interface (RS-232C) port can be used to print the recorded
data. The recorded data can be printed out by the operator or
manager.
Recorded contents are as follows:
1. Date of record
l The date and time when cleared
l The date and time when printed out
2. Incoming calls
l The number of incoming calls
l The number of answered incoming...

SFeatures
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, System working report
[806] Serial Interface (RS-232C) Parameters
Feature ReferencesSection 3, Features
Station Message Detail Recording (SMDR)
Operation ReferencesOperator / Manager Service Features-User Manual
System Working Report
3- 148Features 

3FeaturesTime-out, VariableT
DescriptionProvides timers to control various features or functions.
The following timers are programmable:System Timer Items
Range
Automatic Redial Interval Timenx lOs, n:3 - 120
Automatic Redial Repeated Times1 - 30 times
Call Forwarding - No Answer Time-Out1 - 12 rings
Call Park Recall Time
3 - 48 rings
DISA AA Wait Time1-5s
DISA Delayed Answer Time0 - 6 rings
Extension-to-Outside Call Duration Time1 
- 64 min
Hold Recall Time0-240s
Intercept Routing Time-Out
3 - 48 rings...

T3Features ,,,,,Voice Mail Integration Timer Items
DTMF Signal Duration
DTMF Signal Waiting Time
after VPS Answer
80 / 160 ms0.5 
/ 1.0 / 1.5 / 2.0 s
DTMF Signal Waiting Time
after VPS calls Extension0.5 
/ 1.0 / 1.5 / 2.0 s
Programming References
Section 4, System Programming
[200] Hold Recall Time
[201] Transfer Recall Time
[202] Call Forwarding - No Answer Time
[203] Intercept Time
[204] Pickup Dial Waiting Time
[205] Extension-to-Outside Line Call Duration Time
[206] Outside-to-Outside Line Call...