Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

Featuresc
Conference, Unattended
Conditions DescriptionWhen a proprietary telephone user is in a conference with two
outside parties, the user can leave the conference to allow the other
two parties to continue conversation. This is called an Unattended
Conference. The user may return to the conference, if desired.l An Unattended Conference can be established when the extension is
allowed to transfer a call to au outside line.
l The duration of an unattended conference is restricted by a system
timer....

cFeatures
Confirmation Tone
DescriptionAt the end of many different functions the system confirms the
success of the operation by sending a confirmation tone to the
extension user through the speaker of the telephone.Confirmation tone 1:
(a) Indicates that the new setting differs from the previous setting.
(b) Set or cancel the Electronic Station Lockout.
’ Confirdation toAe 2:’
III
I
(a) Indicates that the new setting is identical to the previous setting.
(b) In addition, sent when various features are...

FeaturescConfirmation tone 4:
Sent when moving from a two-party call to a three-party call, and
vice versa. (These are caused by Executive Busy Override,
Conference, or Privacy Release.) It is possible to eliminate this
tone by System Programming.
I1s ;II111III1I
ConditionsConfirmation Tone 1 and 2 are provided to reconfirm the assigned
feature.
Programming References
Section 4, System Programming
[805] External Pager Confirmation Tone
[990] System Additional Information, Fields (13), (16)
Feature...

Features
Consultation Hold
DescriptionAllows the extension user to place a call on hold temporarily to
transfer it, make a Conference call, or perform Call Splitting. The
held call can be retrieved from other extensions.
Conditions
l With a proprietary telephone, Consultation Hold is established by
pressing TRANSFER or CONF button. With a standard telephone, it is
established by pressing the hookswitch lightly.
l With a standard telephone, the user can hold a call only to transfer it.
l Doorphone calls...

FeaturesD
Data Line Security
DescriptionData Line Security is a function that can be set on individual
extensions. Once set, communication between the extension and
the other end is protected from signals such as Call Waiting, Hold
Recall and Executive Busy Override. Data equipment or a
facsimile may be connected to an extension jack so that the user
can perform data communications. During communication, Data
Line Security maintains secure data transmission against tones or
interruptions from other...

D
Dial Tone, Distinctive
Description
ConditionsFour types of dial tone patterns are available to give information
about features activated on the telephone set.
Dial tone 1: Normal dial tone. None of the features. listed below
are activated.
Dial tone 2: Emitted when any one of the features below are set.
Absent Message Capability
Background Music (BGM) (for proprietary telephones only)
Call Forwarding
Call Pickup Deny
Call Waiting
Data Line Security
Do Not Disturb (DND)
Electronic Station Lockout...

FeaturesD
Dial Type Selection
DescriptionAllows you to select the desired dialing mode for each outside line
regardless of originating call extension (rotary or tone).
There are three dialing modes available:
DTMF (Dual Tone Multi-Frequency) ModeThe dialing signal from an extension, either tone or rotary, is
converted to tone dialing. DTMF signals are transmitted to
the outside line.
Pulse Dial (Rotary) ModeThe dialing signal from an extension, either tone or rotary, is
converted to rotary dialing....

DFeatures
Direct In Lines (DIL)
DescriptionEnables an incoming outside call to go directly to one or more
answering points.
DIL 1: 1 puts an incoming outside call to a single destination.
Assignable destinations are: (1) extension; (2) external pager; or (3)
DISA message. This outside line can be used by multiple extension
users to make calls but can be used by only one extension to
receive calls.
DIL 
1:N puts an incoming outside call to multiple destinations.
Assignable destinations are extensions...

FeaturesD
Direct Inward System Access (DISA)
Conditions Description
External callers can call extensions in the system. An outgoing
message greets the caller and gives information about how to
access an extension.
An outgoing message can be recorded by the operator or manager.
External callers can also call extensions using a pre-assigned one
digit number (DISA built-in auto attendant number).
. The following items are required for the DISA feature:
(1) An optional Caller ID 
/ DISA / FAX Detection Card...

D3Features
[815] DISA Built-in Auto Attendant
[990] System Additional Information, Fields (31), (32), (34)
To set DISA timer values
[213] DISA Delayed Answer Time
[218] DISA AA Wait Time
To enable the Intercept Routing feature
[203] Intercept Time
[409]-[410] Intercept Extension - Day / Night
Feature ReferencesSection 3, Features
Intercept RoutingOutgoing Message (OGM)
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Direct Inward System Access (DISA)3-60Features