Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

FeaturesB
Button, Single-CO (S-CO)
DescriptionA Single-CO (S-CO) button is an outside line access button. This
allows 
the proprietary telephone user to access a specific line by
pressing a S-CO button. An incoming call can be directed to an 
S-
CO button.Conditions
l The default setting for CO buttons is changeable. (Flexible CO Button)
l An S-CO button provides outside line status.
l If Automatic Route Selection (ARS) is set, it is overridden by an
outgoing call made by pressing the S-CO button.
l...

BFeatures
Buttons on Proprietary Telephones
DescriptionProprietary telephones are provided with the feature / line access
buttons listed below:
KX-T Proprietary Telephones:
CONF tI (/
FLASHI (f
t
Function
FWD/DNDtI d
7030
4
d&
-A-
L
r/
d (4)
r/
ISHIFT tI7050 7055 7130 7220
r/ (/
(/d! (/ (/
d(12) d(3) s/(12) c/(24;
(/! (/! d d
d d (/ c/d(4) I d(3) 
jd(12)j7250 
1
(/ : The button is provided on the designated telephones.
t: The button is provided with an LED (Light Emitting Diode).
*: The buttons which can...

FeaturesBConditionsCentral Office or host PBX to access their features (External
Feature Access).
Function: Used to perform the displayed function 
/ operation.
FWD / DND (Call Forwarding / Do Not Disturb): Used toprogram Call Forwarding, set Do Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.MESSAGE: Used to send a message or display current message.
MONITOR: Used for a handsfree operation.PAUSE: Inserts a pause in a speed dial number. With an analog...

CCaller ID
DescriptionProvides the display proprietary telephone user with a caller’s
information, such as his 
/ her name and telephone number, on the
outside line assigned to receive Caller ID service calls.
Additionally, a special standard telephone, which has a Caller ID
feature, can receive the Caller ID service from the Central Office
and display the caller’s information (Internal Caller ID).
Conditionsl Up to 100 Caller ID entry numbers can be stored in a table called
“Caller ID Table” in the...

3FeaturesC
[ 1281 Internal Caller ID Extension Assignment
[406] Caller ID Assignment
[417] Outside Line Name Assignment
[990] System Additional Information, Field (30)
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Initial Display Selection
Feature ReferencesSection 3, Features
Call Log, IncomingOperation References DPT Features
-User Manual
Call Information/Log, Incoming
Call Log, IncomingFeatures
3-25 

C3Features
CALL FORWARDING FEATURES - SUMMARY
DescriptionCall forwarding features enable you to have your calls forwarded to
a specified destination. You may specify the circumstances under
which your calls are forwarded. The following Call Forwarding
features are available:
Call Forwarding 
- All Calls
Call Forwarding 
- Busy
Call Forwarding 
- Busy / No Answer
Call Forwarding - Follow MeCall Forwarding 
- No Answer
Call Forwarding 
- to Outside Line
C~II Forwarding - All Calls
DescriptionThis feature...

FeaturesC
Feature ReferencesNoneoperation References
DPT Features, Standard Telephone Features-User Manual
Call Forwarding - All Calls
Call Forwarding - Busy
DescriptionA call directed to your extension is forwarded to another extension
if your telephone is busy.
Conditionsl Types of calls which are forwarded by this feature are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls 
- Extension; Transfer
l There can only be one stage of Call Forwarding, if a call is forwarded to
a station...

CFeatures
Call Forwarding - Busy / No Answer
DescriptionYour calls are forwarded to another extension if your extension is
busy or you do not answer the call within a pre-determined time.
Conditionsl Types of calls which are forwarded by this function are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls 
- Extension; Transfer
l This function operates the same way as Call Forwarding - Busy and
Call Forwarding 
- No Answer.
l There can only be one stage of Call Forwarding if a call is...

3Featuresc
Call Forwarding - Follow Me
DescriptionIf you forget to set Call Forwarding - All Calls before you leave
your desk, this allows you to set the same function from thedestination extension.
Conditibnsl Same as the conditions of Call Forwarding - All Calls.
l It is programmable to enable or disable this feature on Class of Service
basis.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[ 1001 Flexible Numbering, Call forwarding / do not disturb
[991] COS...

3Features
. Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function.If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.
l A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming _
[005] Flexible CO Button Assignment
[ 1001...