Panasonic Kx Taw848 Feature Manual

4.4 Extension [4]
Feature Guide 371
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook. DefaultStarting at 101 (For port 01 of the first extension card that is...

4.4 Extension [4]
372 Feature Guide
Intercom Call by Voice
Selects the method of receiving intercom calls. When Deny Voice Call is selected, the called 
party always receives calls by a ring tone: the caller cannot change the called party’s call 
receiving method.
Call Waiting Tone Type
Selects the type of Call Waiting tone sent to the busy extension.
LCS Recording Mode
Specifies whether to continue or stop recording the message in the extension’s mailbox after 
the extension user answer the call while...

4.4 Extension [4]
Feature Guide 373
Display Language
Selects the display language of the extension telephone.
Option 5
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only). DefaultHands free
Va lu e  Ra n g eHands free: Monitor through the built-in speaker
Private: Monitor through the handset or the built-in speaker after 
hearing an alarm tone
Feature Guide References
Feature References
1.19.2 Voice Mail DPT (Digital) Integration...

4.4 Extension [4]
374 Feature Guide
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the 
extension number is changed while the port is in use, the new extension number will not come 
into effect.
Extension Name...

4.4 Extension [4]
Feature Guide 375
Key Pad Tone
Specifies whether the key pad tones are heard when dialing.
Automatic Answer for CO Call
Enables the extension user to answer an incoming CO line call automatically after a certain 
number of rings without going off-hook, when Hands-free Answerback has been set on the 
extension. This setting is only effective when Forced Automatic Answer on this screen has 
been set to Off.
Forced Automatic Answer
Specifies whether the extension user automatically answers...

4.4 Extension [4]
376 Feature Guide
Option 6
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If...

4.4 Extension [4]
Feature Guide 377
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Incoming Call Log Lock
Locks or unlocks the Incoming Call Log display (i.e., prevents or allows the other extension 
users to see the Incoming Call Log information at the extension).
Paging Deny
Enables the prevention of being paged by other extensions.
Flash mode during...

4.4 Extension [4]
378 Feature Guide
Incoming Call Log Memory
Specifies the number of incoming CO line calls that are retained in the extension’s Incoming 
Call Log memory.
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy 
extension at the time of going on-hook after a call.
Option 7
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Feature Guide...

4.4 Extension [4]
Feature Guide 379
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the 
extension number is changed while the port is in use, the new extension number will not come 
into effect.
Extension Name...

4.4 Extension [4]
380 Feature Guide
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time the ringing for a call is delayed when the call follows immediately 
after the previous unanswered call. When receiving two calls in quick succession (e.g., when 
a call waiting in a queue is directed to an extension immediately after the previous call stops 
ringing), some SLTs require a pause, after the first call stops ringing, to receive the second 
call’s Caller ID information.
Note that...