Panasonic Kx Taw848 Feature Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Feature Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 381
![Page 381
4.4 Extension [4]
Feature Guide 381
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
Extension Name...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-380.png "Page 381
4.4 Extension [4]
Feature Guide 381
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
Extension Name...")
4.4 Extension [4] Feature Guide 381 Extension Number Specifies the extension number of the extension. To change the extension number of a wired extension, follow the steps below: 1.Type the new extension number, then click Apply. 2.Set the status of the extension port to OUS, then INS. When changing the extension number, make sure that the extension port is not in use. If the extension number is changed while the port is in use, the new extension number will not come into effect. Extension Name...
Page 382
![Page 382
4.4 Extension [4]
382 Feature Guide
FWD Mode for Call from CO
Indicates the forwarding type of incoming CO line calls (reference only).
FWD Destination for Call from CO
Indicates the forwarding destination of incoming CO line calls (reference only).
FWD Set for Call from Extension
Indicates the current FWD status for incoming intercom calls (reference only).
DND Set for Call from Extension
Indicates the current DND status for incoming intercom calls (reference only). DefaultOff
Va lu e Ra n g eOff, On...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-381.png "Page 382
4.4 Extension [4]
382 Feature Guide
FWD Mode for Call from CO
Indicates the forwarding type of incoming CO line calls (reference only).
FWD Destination for Call from CO
Indicates the forwarding destination of incoming CO line calls (reference only).
FWD Set for Call from Extension
Indicates the current FWD status for incoming intercom calls (reference only).
DND Set for Call from Extension
Indicates the current DND status for incoming intercom calls (reference only). DefaultOff
Va lu e Ra n g eOff, On...")
4.4 Extension [4] 382 Feature Guide FWD Mode for Call from CO Indicates the forwarding type of incoming CO line calls (reference only). FWD Destination for Call from CO Indicates the forwarding destination of incoming CO line calls (reference only). FWD Set for Call from Extension Indicates the current FWD status for incoming intercom calls (reference only). DND Set for Call from Extension Indicates the current DND status for incoming intercom calls (reference only). DefaultOff Va lu e Ra n g eOff, On...
Page 383
![Page 383
4.4 Extension [4]
Feature Guide 383
FWD Mode for Call from Extension
Indicates the forwarding type of incoming intercom calls (reference only).
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
FWD No Answer Time
Indicates the length of time an incoming call rings at the extension before the call is forwarded
(reference only). DefaultOff
Va lu e Ra n g eOff, On
Feature Guide References
Feature References
1.3.1.3 Do Not Disturb...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-382.png "Page 383
4.4 Extension [4]
Feature Guide 383
FWD Mode for Call from Extension
Indicates the forwarding type of incoming intercom calls (reference only).
FWD Destination for Call from Extension
Indicates the forwarding destination of incoming intercom calls (reference only).
FWD No Answer Time
Indicates the length of time an incoming call rings at the extension before the call is forwarded
(reference only). DefaultOff
Va lu e Ra n g eOff, On
Feature Guide References
Feature References
1.3.1.3 Do Not Disturb...")
4.4 Extension [4] Feature Guide 383 FWD Mode for Call from Extension Indicates the forwarding type of incoming intercom calls (reference only). FWD Destination for Call from Extension Indicates the forwarding destination of incoming intercom calls (reference only). FWD No Answer Time Indicates the length of time an incoming call rings at the extension before the call is forwarded (reference only). DefaultOff Va lu e Ra n g eOff, On Feature Guide References Feature References 1.3.1.3 Do Not Disturb...
Page 384
![Page 384
4.4 Extension [4]
384 Feature Guide
4.4.2 Wired Extension—FWD/DND [4-1-2]
For each extension, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can
be programmed for incoming intercom and CO line calls. Select the desired extension from the
Extension Number / Name list.
Call from CO—Present Button Status
Indicates the current status of the FWD/DND—External button (reference only).
Call from CO—FWD Status Availability
Turns on or off the FWD feature for incoming CO line calls.
Call from...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-383.png "Page 384
4.4 Extension [4]
384 Feature Guide
4.4.2 Wired Extension—FWD/DND [4-1-2]
For each extension, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can
be programmed for incoming intercom and CO line calls. Select the desired extension from the
Extension Number / Name list.
Call from CO—Present Button Status
Indicates the current status of the FWD/DND—External button (reference only).
Call from CO—FWD Status Availability
Turns on or off the FWD feature for incoming CO line calls.
Call from...")
4.4 Extension [4] 384 Feature Guide 4.4.2 Wired Extension—FWD/DND [4-1-2] For each extension, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be programmed for incoming intercom and CO line calls. Select the desired extension from the Extension Number / Name list. Call from CO—Present Button Status Indicates the current status of the FWD/DND—External button (reference only). Call from CO—FWD Status Availability Turns on or off the FWD feature for incoming CO line calls. Call from...
Page 385
![Page 385
4.4 Extension [4]
Feature Guide 385
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Call from Extension—Present Button Status
Indicates the current status of the FWD/DND—Internal button (reference only).
Call from Extension—FWD Status Availability
Turns on or off the FWD feature for incoming intercom calls.
Call from Extension—DND Status Availability
Turns on or off the DND feature for intercom calls.
Feature Guide References
Feature References
1.3.1.2 Call...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-384.png "Page 385
4.4 Extension [4]
Feature Guide 385
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Call from Extension—Present Button Status
Indicates the current status of the FWD/DND—Internal button (reference only).
Call from Extension—FWD Status Availability
Turns on or off the FWD feature for incoming intercom calls.
Call from Extension—DND Status Availability
Turns on or off the DND feature for intercom calls.
Feature Guide References
Feature References
1.3.1.2 Call...")
4.4 Extension [4] Feature Guide 385 Call from CO—FWD Destination Specifies the forwarding destination of incoming CO line calls. Call from Extension—Present Button Status Indicates the current status of the FWD/DND—Internal button (reference only). Call from Extension—FWD Status Availability Turns on or off the FWD feature for incoming intercom calls. Call from Extension—DND Status Availability Turns on or off the DND feature for intercom calls. Feature Guide References Feature References 1.3.1.2 Call...
Page 386
![Page 386
4.4 Extension [4]
386 Feature Guide
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.
FWD No Answer Timer
Specifies the length of time an incoming call rings at the extension before the call is forwarded.
4.4.3 Wired Extension—Speed Dial [4-1-3]
Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-
digit speed dialing...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-385.png "Page 386
4.4 Extension [4]
386 Feature Guide
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.
FWD No Answer Timer
Specifies the length of time an incoming call rings at the extension before the call is forwarded.
4.4.3 Wired Extension—Speed Dial [4-1-3]
Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-
digit speed dialing...")
4.4 Extension [4] 386 Feature Guide Call from Extension—FWD Mode Specifies the circumstances when incoming intercom calls are forwarded. Call from Extension—FWD Destination Specifies the forwarding destination of incoming intercom calls. FWD No Answer Timer Specifies the length of time an incoming call rings at the extension before the call is forwarded. 4.4.3 Wired Extension—Speed Dial [4-1-3] Personal Speed Dialing allows extension users to dial frequently dialed numbers using two- digit speed dialing...
Page 387
![Page 387
4.4 Extension [4]
Feature Guide 387
be programmed for each extension. Select the desired extension from the Extension Number
/ Name list.
Speed Dialing Name
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed
Dialing Directory shown on the extension’s display. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Dialing Number
Specifies the number to be dialed by the...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-386.png "Page 387
4.4 Extension [4]
Feature Guide 387
be programmed for each extension. Select the desired extension from the Extension Number
/ Name list.
Speed Dialing Name
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed
Dialing Directory shown on the extension’s display. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Dialing Number
Specifies the number to be dialed by the...")
4.4 Extension [4] Feature Guide 387 be programmed for each extension. Select the desired extension from the Extension Number / Name list. Speed Dialing Name Specifies the name of the Personal Speed Dialing number to call using the Personal Speed Dialing Directory shown on the extension’s display. As for the available characters, refer to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console. Dialing Number Specifies the number to be dialed by the...
Page 388
![Page 388
4.4 Extension [4]
388 Feature Guide
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone. Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G-
DN, Message Waiting, FWD/DND (Both), FWD/DND (External),
FWD/DND (Internal), Group FWD (Both), Group...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-387.png "Page 388
4.4 Extension [4]
388 Feature Guide
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking
zone. Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G-
DN, Message Waiting, FWD/DND (Both), FWD/DND (External),
FWD/DND (Internal), Group FWD (Both), Group...")
4.4 Extension [4] 388 Feature Guide Parameter Selection (for Single CO) Specifies the CO line to be accessed. Parameter Selection (for Group CO) Specifies the CO line group to be accessed. Parameter Selection (for Call Park) Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone. Va lu e Ra n g eNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, G- DN, Message Waiting, FWD/DND (Both), FWD/DND (External), FWD/DND (Internal), Group FWD (Both), Group...
Page 389
![Page 389
4.4 Extension [4]
Feature Guide 389
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged-in to
or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Feature Guide References
Feature References
1.12.2 Call Park
1.18.2 Flexible Buttons
Programming References...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-388.png "Page 389
4.4 Extension [4]
Feature Guide 389
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged-in to
or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension.
Feature Guide References
Feature References
1.12.2 Call Park
1.18.2 Flexible Buttons
Programming References...")
4.4 Extension [4] Feature Guide 389 Parameter Selection (for Log-in/Log-out) Specifies which incoming call distribution groups that the extension belongs to are logged-in to or logged-out from. Parameter Selection (for Time Service) Selects which time modes are switched manually. Parameter Selection (for TRS Level Change) Specifies the TRS level to be used temporarily on a certain extension. Feature Guide References Feature References 1.12.2 Call Park 1.18.2 Flexible Buttons Programming References...
Page 390
![Page 390
4.4 Extension [4]
390 Feature Guide
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or...](http://img.usermanuals.tech/thumb/58/64575/w300_kx-taw848_en_adv_feature_v1.1_om_d-389.png "Page 390
4.4 Extension [4]
390 Feature Guide
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or...")
4.4 Extension [4] 390 Feature Guide Parameter Selection (for Time Service - Automatic / Manual) Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic. Ext No. or Floating Ext No. (for DSS) Specifies the number of an extension to be accessed. Ext No. or Floating Ext No. (for G-DN) Specifies the floating extension number of an incoming call distribution group to be accessed. Ext No. or Floating Ext No. (for Message Waiting) Specifies the number of an extension or...