Panasonic Kx Taw848 Feature Manual

4.4 Extension [4]
Feature Guide 421
4.4.12 DSS Console—Flexible Key [4-3-2]
Each flexible DSS button can be customized to access a certain feature. A maximum of 66 
flexible DSS buttons can be customized for each DSS Console. Select the desired DSS 
Console from the DSS Console No./ Pair Extension list.
Ty p e
Specifies the feature to be assigned to the flexible DSS button.
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Parameter Selection (for Group CO)
Specifies the CO line...

4.4 Extension [4]
422 Feature Guide
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking 
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are 
logged-in to or logged-out from.
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used...

4.4 Extension [4]
Feature Guide 423
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to 
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed.
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed. Va lu e  Ra n g e1–7
Feature Guide References
Feature References
1.18.2 Flexible Buttons...

4.4 Extension [4]
424 Feature Guide
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call 
distribution group for which messages are checked. If this cell is left empty, the paired 
extension will check its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group to which both 
intercom and CO line calls are forwarded.
Ext No. or...

4.4 Extension [4]
Feature Guide 425
Ext No. or Floating Ext No. (for Call Log)
Specifies the paired extension’s number or the floating extension number of an incoming call 
distribution group for which call log information is displayed. If the cell is left empty, the paired 
extension will display its own call log information.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating...

4.4 Extension [4]
426 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the paired 
extension’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired 
mailbox.
Dial (for...

4.4 Extension [4]
Feature Guide 427
Optional parameter (or Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Optional parameter (or Ringing Tone Type Number) (for Loop CO, Single CO, Group 
CO, G-DN)
Specifies the ring tone type.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button 
whose Parameter Selection on...

4.4 Extension [4]
428 Feature Guide
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record conversations. (For 
example, a secretary records a conversation into the mailbox of a boss.) This setting 
establishes the One-touch Two-way Transfer button. If the cell is left empty, the paired 
extension user can specify the number of an extension each time.
4.4.13 DSS Console—Flexible Key [4-3-2] Flexible Key Data 
Copy
The flexible DSS...

4.5 Optional Device [5]
Feature Guide 429
4.5 Optional Device [5]
4.5.1 Doorphone [5-1]
The settings to establish doorphone calls can be programmed.
Physical—Slot
Indicates the slot position (reference only).
Physical—Port
Indicates the port number (reference only).
Name
Specifies the doorphone name. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Destination—Day, Lunch, Break, Night
Specifies the...

4.5 Optional Device [5]
430 Feature Guide
Tenant Number
Specifies the tenant number for the doorphone port in order to apply the Time Table (day/lunch/
break/night).
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone 
ports that are able to make CO line calls, and sets restrictions on intercom calls from certain 
extensions (Internal Call Block).
VM Trunk Group Number
Specifies the number of the VPS trunk (CO line) group sent to the VPS when the doorphone 
call...