Panasonic Kx Taw848 Feature Manual

4.10 Maintenance [10]
Feature Guide 461
4.10.2 PT System Program [10-2]
PROG**
Enables extension users to set a certain system programming by a PT.
4.10.3 Miscellaneous [10-3]
Various settings for on-site and remote programming and diagnosis can be specified.
Analog Remote (Modem) Floating Extension Number
Specifies the floating extension number for analog remote maintenance. To enable this setting, 
an RMT card must be installed, and Remote Programming on this screen must be enabled.
Remote Programming...

4.10 Maintenance [10]
462 Feature Guide
Password Lock Counter for Remote Programming 
Specifies the number of successive incorrect password entries before remote access is locked.
Remote Maintenance Dial Number (Own telephone number for reference)
Specifies the telephone number of the PBX used for reference.
This number can be specified by Quick Setup, and will be used to access the PBX from a 
remote location for maintenance purposes.
RS-232C: Baud Rate
Specifies the data transmission speed from the PBX...

4.10 Maintenance [10]
Feature Guide 463
RS-232C: NL Code
Specifies the NL (New Line) code for the printer or personal computer.
If the printer or personal computer automatically feeds lines with a carriage return, select CR 
(Carriage Return). If not, select CR+LF (Line Feed).
RS-232C: Word Length
Specifies the number of bits in each byte of a character.
When connecting the KX-TAW848 Maintenance Console to the PBX using an RS-232C cable, 
assign the following values to the Serial Interface (RS-232C) port...

4.10 Maintenance [10]
464 Feature Guide
RS-232C: Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal 
computer.
RS-232C: Flow Control
Enables the hardware flow control.
Error Log Information Print
Specifies whether the PBX error log is printed to the SMDR output.
Local Alarm Display Extension 1, Local Alarm Display Extension 2
Specifies the extension numbers of PTs which...

4.10 Maintenance [10]
Feature Guide 465
Daily Test Start Time : Set 
Enables the daily self check of the PBX for local alarm and error log.
Daily Test Start Time : Hour
Specifies the hour of the start time for the daily self check of the PBX.
Daily Test Start Time : Minute
Specifies the minute of the start time for the daily self check of the PBX.
External Modem Command - Automatic Initialization
Specifies the command to automatically initialize an external modem every time it is plugged 
into the Serial...

4.10 Maintenance [10]
466 Feature Guide
External Modem Command - Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here 
is controlled by PT system programming (External Modem Control [801]). As for the available 
characters, refer to the character code table described in section 3.2.1 Installing and Starting 
KX-TAW848 Maintenance Console.
4.10.4 Password Setting [10-4]
Passwords authorize the user to program the...

4.10 Maintenance [10]
Feature Guide 467
PT Manager Programming : [Prog *1]
Specifies the manager password to authorize the PT user to access manager programming.
PC System Programming Password : User Level
Specifies the system password used to access KX-TAW848 Maintenance Console in User 
Level.
PC System Programming Password : Administrator Level
Specifies the system password used to access KX-TAW848 Maintenance Console in 
Administrator Level. Va lu e  Ra n g e4–10 digits (consisting of 0–9)
Feature...

4.10 Maintenance [10]
468 Feature Guide
PC System Programming Password : Installer Level
Specifies the system password used to access KX-TAW848 Maintenance Console in Installer 
Level.
Default1234
Va lu e  Ra n g e4–10 digits (consisting of 0–9)
Feature Guide References
Feature References
2.3.1 PC Programming
Programming References
None 

Feature Guide 469
Section 5
Appendix 

5.1 Capacity of System Resources
470 Feature Guide
5.1 Capacity of System Resources
5.1.1 Capacity of System Resources
Category Item Capacity
SystemTenant 8
COS 64
CO Line Group 64
Extension Group 32
Paging Group 32
Call Pickup Group 64
Incoming Call Distribution Group 64 (32 extensions/group)
PS Ring Group 32
VM (DPT) Group
1 VPS   8 ch
VM (DTMF) Group
2 groups   24 ch
Queuing Time Table 64
Idle Extension Hunting Group 64 (16 extensions/group)
Absent Message—System
8   16 characters
Absent...