Panasonic Kx Taw848 Feature Manual

4.4 Extension [4]
Feature Guide 411
Call from CO—DND Status Availability
Turns on or off the DND feature for incoming CO line calls.
Call from CO—FWD Mode
Specifies the circumstances when incoming CO line calls are forwarded.
Call from CO—FWD Destination
Specifies the forwarding destination of incoming CO line calls.
Call from Extension—Present Button Status
Indicates the current status of the FWD/DND—Internal button (reference only). Programming References
None
DefaultOFF
Va lu e  Ra n g eOFF, ON...

4.4 Extension [4]
412 Feature Guide
Call from Extension—FWD Status Availability
Turns on or off the FWD feature for incoming intercom calls.
Call from Extension—DND Status Availability
Turns on or off the DND feature for incoming intercom calls.
Call from Extension—FWD Mode
Specifies the circumstances when incoming intercom calls are forwarded.
Call from Extension—FWD Destination
Specifies the forwarding destination of incoming intercom calls.Programming References
None
DefaultOFF
Va lu e  Ra n g eOFF,...

4.4 Extension [4]
Feature Guide 413
FWD No Answer Timer
Specifies the length of time an incoming call rings at the PS before the call is forwarded.
4.4.9 Portable Station—Flexible Key [4-2-3]
Each flexible CO button can be customized to allow one-touch access to a certain feature. A 
maximum of 12 flexible CO buttons can be customized for each PS. Select the desired PS from 
the Extension Number / Name list.
Ty p e
Specifies the feature to be assigned to the flexible button.
Parameter Selection (for...

4.4 Extension [4]
414 Feature Guide
Parameter Selection (for Group CO)
Specifies the CO line group to be accessed.
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking 
zone.
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged-in to or 
logged-out from.
Feature Guide References
Feature References
1.18.2 Flexible Buttons
Programming References
4.4.10...

4.4 Extension [4]
Feature Guide 415
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to 
automatic.
Ext No. or Floating Ext No. (for DSS)
Specifies the number of an extension to be accessed. DefaultAll
Va lu e  Ra n g eAll...

4.4 Extension [4]
416 Feature Guide
Ext No. or Floating Ext No. (for G-DN)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Ext No. or Floating Ext No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call 
distribution group for which messages are checked. If this cell is left empty, the PS will check 
its own messages only.
Ext No. or Floating Ext No. (for Group FWD (Both))
Specifies the floating...

4.4 Extension [4]
Feature Guide 417
Ext No. or Floating Ext No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming call distribution group to which intercom 
calls are forwarded.
Ext No. or Floating Ext No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-
out from.
Ext No. or Floating Ext No. (for Hurry-up)
Specifies the floating extension number of an incoming call distribution group for which Manual...

4.4 Extension [4]
418 Feature Guide
Ext No. or Floating Ext No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the PS’s mailbox.
Ext No. or Floating Ext No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Ext No. or Floating Ext No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired 
mailbox.
Dial (for One-touch)
Specifies the...

4.4 Extension [4]
Feature Guide 419
Optional parameter (or Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Optional parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked by pressing the Call Park button 
whose Parameter Selection on this screen is Specific.
Extension Number of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose...

4.4 Extension [4]
420 Feature Guide
4.4.10 Portable Station—Flexible Key [4-2-3] Flexible Key 
Data Copy
The flexible CO button settings of a PS can be copied to different PSs. Select the PS that has 
the settings to copy to other PSs from the Extension Number / Name list, then click Copy To.
Destination Extension Line
Select the number and name of the PS that will receive the copied settings. Multiple PSs can 
be selected. To select all PSs at once, click Select All.
4.4.11 DSS Console—Main [4-3-1]
A...