Panasonic Kx Taw848 Feature Manual

4.8 ARS [8]
Feature Guide 451
Authorization Code for TRG
Specifies an Authorization code for each CO line group. The Authorization codes can be added 
to the user-dialed number by specifying G command in Modify Command on the Carrier 
tab.
Authorization Code for Trunk Group—TRG 01–TRG 64
Specifies the Authorization code of each carrier for each CO line group.
4.8.6 Leading Number Exception [8-6]
Specifies telephone numbers that will not be connected using the ARS feature. When the user-
dialed number...

4.9 CO & Incoming Call [9]
452 Feature Guide
4.9 CO & Incoming Call [9]
4.9.1 CO Line Setting [9-1]
CO lines can be assigned a name, and grouped into a maximum of 64 CO line groups.
Physical—Slot
Indicates the slot position of each CO line card (reference only).
Physical—Port
Indicates the port number (reference only).
CO Name
Specifies the CO line name which is shown on the extension’s display when receiving a call 
from the CO line. As for the available characters, refer to the character code table...

4.9 CO & Incoming Call [9]
Feature Guide 453
4.9.2 DIL Table & Port Setting [9-2]
Direct In Line (DIL) can be selected for each CO line as the method of distributing incoming 
CO line calls to certain destinations. For each CO line to which the DIL distribution is set, 
different destinations can be programmed depending on the time mode (day/lunch/break/
night). If desired, Calling Line Identification (CLI) distribution can be used in conjunction with 
the DIL distribution.
DIL
For each CO line to which...

4.9 CO & Incoming Call [9]
454 Feature Guide
DIL Destination—Day, Lunch, Break, Night
Specifies the DIL destination in each time mode.
Tenant Number
Specifies the tenant number to determine the Time Table by which calls are distributed 
depending on the time of the day.
VM Trunk Group No.
Specifies the number of the VPS trunk (CO line) group sent to the VPS when the DIL 
destination is the floating extension number of a VM (DPT) Group.
The VPS trunk (CO line) group number is used to send the applicable...

4.9 CO & Incoming Call [9]
Feature Guide 455
Slot
Indicates the slot position of each CO line card (reference only).
Port
Indicates the port number (reference only).
Card Type
Indicates the CO line card type (reference only).
CLI Ring for DIL—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
4.9.3 Miscellaneous [9-3]
It is possible to activate the Intercept Routing feature when the destination of an incoming CO 
line call is unavailable, or when there is no destination for the call....

4.9 CO & Incoming Call [9]
456 Feature Guide
Intercept when the destination is Busy
Enables the Intercept Routing—Busy feature to activate when the original destination is busy.
Intercept when the destination sets DND
Enables the Intercept Routing—DND feature to activate when the original destination is in DND 
mode.
Routing to Operator when the destination is not programmed
Enables the Intercept Routing—No Destination feature to activate when there is no destination 
for the call. (The Intercept...

4.10 Maintenance [10]
Feature Guide 457
4.10 Maintenance [10]
4.10.1 SMDR [10-1]
Station Message Detail Recording (SMDR) automatically records detailed information about 
incoming and outgoing calls.
SMDR Type
Selects the format of SMDR output.
SMDR Port
Selects the Serial Interface (RS-232C) port that is used to output the SMDR data.
SMDR Page Length (Number of Line)
Specifies the number of lines in a page of output paper. Used to match the SMDR output to the 
paper size being used in the printer....

4.10 Maintenance [10]
458 Feature Guide
SMDR Skip Perforation (Number of Line)
Specifies the number of lines to be skipped at the end of every page. The number of lines for 
the skip perforation should be shorter than the page length.
Outgoing Call Print
Specifies whether the dialed digits of outgoing CO line calls are printed. Class of Service 
(COS) programming determines the printable records.
Incoming Call Print
Specifies whether the information relating to incoming CO line calls, such as caller’s...

4.10 Maintenance [10]
Feature Guide 459
Log-in / Log-out Print
Specifies whether the log-in/log-out status is printed.
ARS Dial
Selects the type of the dialed number to be printed for a call with the ARS feature.
Caller ID Print format
Selects the printing format of caller identifications for incoming CO line calls.
Feature Guide References
Feature References
1.21.1 Station Message Detail Recording (SMDR)
Programming References
None
DefaultNo Print
Va lu e  Ra n g eNo Print, Print
Feature Guide...

4.10 Maintenance [10]
460 Feature Guide
Secret Dial
Selects the printing format of calls with a secret dial. The secret dial conceals all or part of 
dialed number.
Note that selecting Dial before ARS Modification in ARS Dial on this screen indicates the 
dialed numbers as dots regardless of this setting.
Date Format
Selects the printed date format.
Condition Code RC/VR Print
Specifies whether the time of receiving an incoming CO line call is printed.
Condition Code AN/VA Print
Specifies whether the time...