Panasonic Kx Taw848 Feature Manual

4.4 Extension [4]
Feature Guide 361
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Port Type
Indicates the extension port type (reference only).
Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Wireless XDP
Specifies the extension number of the PS with which the Wireless XDP Parallel Mode is 
established....

4.4 Extension [4]
362 Feature Guide
Extension Group
Specifies the extension group to which the extension belongs. The extension group is used to 
compose call pickup groups and paging groups.
COS
Specifies the COS of the extension.
Ring Pattern Table
Specifies the Ring Tone Pattern Table to be used by the extension. DefaultNot stored.
Va lu e  Ra n g eMax. 4 digits (consisting of 0–9)
Feature Guide References
Feature References
1.20.3 Wireless XDP Parallel Mode
Programming References
None
Default1
Va...

4.4 Extension [4]
Feature Guide 363
Option 1
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If...

4.4 Extension [4]
364 Feature Guide
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Intercept Destination—Day, Lunch, Break, Night
Specifies the Intercept Routing destination of CO line calls in each time mode for Intercept 
Routing–No Answer and Intercept Routing–Busy/DND feature.
Programmed Mailbox No.
Specifies the mailbox number of the extension’s...

4.4 Extension [4]
Feature Guide 365
Option 2
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If...

4.4 Extension [4]
366 Feature Guide
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Extension PIN
Specifies the PIN of the extension.
ARS Itemized Code
Specifies the itemized billing code used by the ARS feature for identifying the calls made from 
the extension for accounting and billing purposes.
C. Waiting for Call from Extension
Selects the method...

4.4 Extension [4]
Feature Guide 367
C. Waiting for Call from CO
Specifies whether to receive call waiting notification for a call from CO line, a doorphone call 
or a call via an incoming call distribution group.
Pickup Dial Set
Sets or cancels the Hot Line feature. The number specified in Pickup Dial Number on this 
screen is dialed automatically after going off-hook by the Hot Line feature.
Pickup Dial Number
Specifies the number to be dialed automatically after going off-hook via the Hot Line...

4.4 Extension [4]
368 Feature Guide
Option 3
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension port to OUS, then INS.
When changing the extension number, make sure that the extension port is not in use. If...

4.4 Extension [4]
Feature Guide 369
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Call Pickup Deny
Enables the prevention of calls being picked up by other extensions.
Executive Override Deny
Enables the prevention of calls being interrupted by other extensions.
Absent Message
Specifies the Personal Absent Message which, unlike System Absent Message,...

4.4 Extension [4]
370 Feature Guide
to the character code table described in section 3.2.1 Installing and Star ting KX-TAW848 
Maintenance Console.
Option 4
Slot
Indicates the slot position of each extension card (reference only).
Port
Indicates the port number (reference only).
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.Type the new extension number, then click Apply.
2.Set the status of the extension...