Panasonic Kx Taw848 Feature Manual

4.3 Groups [3]
Feature Guide 331
Tenant Number
Specifies the tenant to which the extension group belongs.
4.3.4 Call Pickup Group [3-3]
Extensions can be assigned to a call pickup group according to their extension group. One 
extension group can belong to multiple call pickup groups. A maximum of 64 call pickup groups 
can be programmed.
Extension Group 1-16
Call Pickup Group Name
Specifies the name of the call pickup group.
Feature Guide References
Feature References
2.2.2 Group
Programming...

4.3 Groups [3]
332 Feature Guide
Extension Group 1–16
Specifies whether the extension group belongs to the corresponding pickup group.
Extension Group 17-32
Call Pickup Group Name
Specifies the name of the call pickup group.
Extension Group 17–32
Specifies whether the extension group belongs to the corresponding pickup group. DefaultExtension Group 1–16: ON for the same-numbered call pickup 
group and group 33–group 64; OFF for other call pickup groups
Va lu e  Ra n g eON, OFF
Feature Guide References...

4.3 Groups [3]
Feature Guide 333
4.3.5 Paging Group [3-4]
Extensions can be assigned to a paging group according to their extension group. External 
pagers can also be assigned to a paging group. One extension group or external pager can 
belong to multiple paging groups. A maximum of 32 paging groups can be programmed.
Extension Group 1-16
Paging Group Name
Specifies the name of the paging group.
Extension Group 1–16
Specifies whether the extension group belongs to the corresponding paging group....

4.3 Groups [3]
334 Feature Guide
Extension Group 17–32
Specifies whether the extension group belongs to the corresponding paging group.
External Pager
Paging Group Name
Specifies the name of the paging group.
External Pager 1
Specifies whether the external pager belongs to the corresponding paging group.
Feature Guide References
Feature References
1.14.1 Paging
2.2.2 Group
Programming References
4.4.1 Wired Extension—Extension Settings [4-1-1]
4.4.7 Portable Station—Extension Settings [4-2-1]...

4.3 Groups [3]
Feature Guide 335
4.3.6 Incoming Call Distribution Group—Group Settings [3-
5-1]
Extensions can be assigned as members of an incoming call distribution group. Calls to an 
incoming call distribution group are distributed to its member extensions as programmed. A 
maximum of 64 incoming call distribution groups can be programmed.
Main
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Group Name
Specifies the name of the incoming call...

4.3 Groups [3]
336 Feature Guide
Call Waiting Distribution
Selects the call waiting distribution method for busy extensions of the incoming call distribution 
group.
FWD Mode
Specifies whether the extension rings in FWD mode when a call comes in to the incoming call 
distribution group.
DND Mode
Specifies whether the extension rings in DND mode when a call comes in to the incoming call 
distribution group. DefaultRing
Va lu e  Ra n g eRing, UCD, Priority Hunting
Feature Guide References
Feature...

4.3 Groups [3]
Feature Guide 337
Tenant Number
Specifies the tenant to which the incoming call distribution group belongs, to determine the 
Time Table and the audio source for the group. (The tenant number corresponds to the Time 
Table number.)
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from 
certain extensions are restricted as determined by the Internal Call Block feature. Also, when 
calls are forwarded or overflowed to a CO line, the TRS assigned for...

4.3 Groups [3]
338 Feature Guide
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer 
to the character code table described in section 3.2.1 Installing and Star ting KX-TAW848 
Maintenance Console.
Queuing Busy—Destination—Day, Lunch, Break, Night
Specifies the overflow destination of calls that cannot be queued in each time mode.
Queuing Busy—Queuing Call Capacity
Specifies the number of calls that can wait in a queue.
Overflow No Answer
Floating...

4.3 Groups [3]
Feature Guide 339
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer 
to the character code table described in section 3.2.1 Installing and Starting KX-TAW848 
Maintenance Console.
Time out & Manual Queue Redirection—Destination—Day, Lunch, Break, Night
Specifies the overflow destination of queued calls when they are not answered or are 
redirected by Manual Queue Redirection in each time mode.
Time out & Manual Queue...

4.3 Groups [3]
340 Feature Guide
Hurry-up Level
Specifies the number of calls to hold in the queue before prompting the Manual Queue 
Redirection by flashing the Hurry-up button.
Queuing Time Table
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer 
to the character code table described in section 3.2.1 Installing and Star ting KX-TAW848...