Panasonic Kx Taw848 Feature Manual

4.3 Groups [3]
Feature Guide 341
Queuing Time Table When Extension Ringing
Enables the PBX to play messages/BGM to the caller according to the Queuing Time Table, 
when the call arrives at an extension without being queued or after being queued.
Miscellaneous
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer 
to the character code table...

4.3 Groups [3]
342 Feature Guide
Extension No Answer Time
Specifies the length of time a call queues at an extension before it is redirected to the next 
member extension of the incoming call distribution group in UCD or Priority Hunting distribution 
method.
Automatic Log-out
Specifies the number of consecutive unanswered calls before a member extension is 
automatically logged out from the incoming call distribution group.
Maximum No. of Busy Extensions
Specifies the number of extensions that can...

4.3 Groups [3]
Feature Guide 343
VIP Call Mode
Enables the VIP Call mode to prioritize incoming call distribution groups.
Programmed Mailbox No.
Specifies the VPS mailbox number of the incoming call distribution group. The mailbox number 
programmed here is to be used only by VM (DTMF) group.
Group Log / Group FWD
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Feature Guide References
Feature References
1.2.2.6 Log-in/Log-out
Programming...

4.3 Groups [3]
344 Feature Guide
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer 
to the character code table described in section 3.2.1 Installing and Star ting KX-TAW848 
Maintenance Console.
Incoming Call Log Memory
Specifies the number of unanswered calls to the incoming call distribution group that can be 
logged in the call log memory.
Group FWD for Call from CO—Setting
Sets or cancels the FWD feature for incoming CO line calls directed...

4.3 Groups [3]
Feature Guide 345
Group FWD for Call from Extension—Setting
Sets or cancels the FWD feature for incoming intercom calls directed to the incoming call 
distribution group.
Group FWD for Call from Extension—Destination
Specifies the forward destination of incoming intercom calls directed to the incoming call 
distribution group.
4.3.7 Incoming Call Distribution Group—Member [3-5-2]
Each incoming call distribution group can have a maximum of 32 members (extensions) 
assigned to it, and each...

4.3 Groups [3]
346 Feature Guide
Delayed Ring
Specifies the Delayed Ringing setting of each member. (Applicable when the call distribution 
method of the incoming call distribution group is set to Ring.)
Wrap-up Time
Specifies the length of time that must pass after completing a call before the member can 
accept another call.
4.3.8 Incoming Call Distribution Group—Queuing Time 
Table [3-5-3]
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a 
queue are handled. A...

4.3 Groups [3]
Feature Guide 347
4.3.9 Extension Hunting Group [3-6]
If an extension within an idle extension hunting group is called when it is busy or in DND mode, 
the call can be redirected to another extension in the same hunting group, according to a 
preprogrammed hunting type. If there is no idle extension in the group, the call can then be 
redirected to the overflow destination, which can be different depending on the time mode (day/
lunch/break/night). A maximum of 64 hunting groups can be...

4.3 Groups [3]
348 Feature Guide
Overflow—Day, Lunch, Break, Night
Specifies the overflow destination of an unanswered call in each time mode.
Member Extension 1–16
Specifies the extension number of each member extension of the idle extension hunting group.
4.3.10 VM(DPT) Group—System Setting [3-7-1]
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to hybrid/
APT ports of the PBX. The hybrid/APT ports that are connected to the VPS are called a VM 
(DPT) Group.
A maximum of...

4.3 Groups [3]
Feature Guide 349
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a CO 
line call is redirected to the VM (DPT) group by Intercept Routing. When the VPS receives the 
mailbox number, the VPS answers the call with the appropriate mailbox.
Transfer Recall to Mailbox
Enables the PBX to send the mailbox number of the transfer destination extension to the VPS 
when a call is transferred to an extension by the Call Transfer without...

4.3 Groups [3]
350 Feature Guide
Group Name
Specifies the name of the VM (DPT) group, which will be shown on the display of the extension 
that has called the VM (DPT) group. As for the available characters, refer to the character code 
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
4.3.12 VM(DTMF) Group—System Setting [3-8-1]
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT 
ports of the PBX. The SLT ports that are connected...