Panasonic Kx Taw848 Feature Manual

4.2 System [2]
Feature Guide 291
Group FWD Set / Cancel: Call from CO & Extension
Specifies the feature number used for setting or canceling FWD for incoming CO line and 
intercom calls to an incoming call distribution group.
Group FWD Set / Cancel: Call from CO
Specifies the feature number used for setting or canceling FWD for incoming CO line calls to 
an incoming call distribution group.
Group FWD Set / Cancel: Call from Extension
Specifies the feature number used for setting or canceling FWD for...

4.2 System [2]
292 Feature Guide
Call Pickup Deny Set / Cancel
Specifies the feature number used for setting or canceling Call Pickup Deny (i.e., preventing or 
allowing the other extensions to pick up calls to your extension).
Paging Deny Set / Cancel
Specifies the feature number used for setting or canceling Paging Deny (i.e., preventing or 
allowing other extensions to page your extension).
Walking Extension
Specifies the feature number used for using the same extension settings at a new extension....

4.2 System [2]
Feature Guide 293
Call Waiting Mode: Call from Extension
Specifies the feature number used for setting or changing the method of receiving a Call 
Waiting from an extension.
Call Waiting Mode: Call from CO
Specifies the feature number used for setting or canceling a Call Waiting from a CO line, 
doorphone, or a call via an incoming call distribution group.
Executive Override Deny Set / Cancel
Specifies the feature number used for setting or canceling Executive Busy Override (i.e.,...

4.2 System [2]
294 Feature Guide
Not Ready (Manual Wrap-up) Mode On / Off
Specifies the feature number used for entering or leaving the Not Ready mode.
Log-in / Log-out
Specifies the feature number used for joining or leaving the incoming call distribution group.
Hot Line ([Pickup Dial) Program / Set / Cancel
Specifies the feature number used for setting/canceling, or programming a number for Hot 
Line.
Feature Guide References
Feature References
1.7.2 Executive Busy Override
2.3.5 Flexible...

4.2 System [2]
Feature Guide 295
Absent Message Set / Cancel
Specifies the feature number used for setting or canceling the presentation of an Absent 
Message.
BGM Set / Cancel
Specifies the feature number used for setting or canceling the BGM heard through the 
telephone speaker while on-hook.
Timed Reminder Set / Cancel
Specifies the feature number used for setting or canceling a Timed Reminder.
Extension Lock Set / Cancel
Specifies the feature number used for locking or unlocking the extension to make...

4.2 System [2]
296 Feature Guide
Time Service (Day / Lunch / Break / Night) Switch
Specifies the feature number, available for manager extensions, used for changing the time 
mode manually.
Remote Extension Lock Off
Specifies the feature number, available for manager extensions, used for unlocking other 
extensions.
Remote Extension Lock On
Specifies the feature number, available for manager extensions, used for locking other 
extensions. Default*77
Va lu e  Ra n g eMax. 4 digits (consisting of 0–9, *,...

4.2 System [2]
Feature Guide 297
Extension Feature Clear
Specifies the feature number used for resetting certain features of an extension to the default.
Extension PIN Set / Cancel
Specifies the feature number used for setting a PIN to an extension.
4.2.12 Numbering Plan—Quick Dialing [2-6-3]
Quick Dialing numbers are used to call extensions or outside parties, or access certain 
features without having to dial their full numbers, if they are properly programmed. A maximum 
of 80 Quick Dialing numbers...

4.2 System [2]
298 Feature Guide
Phone Number
Specifies the number to be dialed when the corresponding Quick Dialing number is used.
4.2.13 Numbering Plan—B/NA DND Call Feature [2-6-4]
Feature numbers used to access various PBX features can be programmed. The following 
features are available while hearing a busy, DND, or ringback tone. Each feature must have a 
unique feature number.
BSS / DND Override
Specifies the feature number used for notifying a busy extension of a second call by Call 
Waiting, or...

4.2 System [2]
Feature Guide 299
Executive Busy Override
Specifies the feature number used for interrupting an existing call to establish a three-party 
conference call.
Alternate Calling - Ring / Voice
Specifies the feature number for allowing a caller to change the called extension’s preset call 
receiving method to ring tone or voice.
Message Waiting Set
Specifies the feature number used for leaving a Message Waiting notification.
Call Monitor
Specifies the feature number used for listening to a busy...

4.2 System [2]
300 Feature Guide
Automatic Callback Busy
Specifies the feature number used to reserve a busy line and receive callback ringing when the 
line becomes idle.
BSS / DND Override-2
Specifies the feature number used for notifying a busy extension of a second call by Call 
Waiting, or calling an extension in DND mode. This is the same setting as BSS / DND Override 
on this screen. Default5
Va lu e  Ra n g e1 digit (0–9, *, or #)
Feature Guide References
Feature References
1.7.3 Call Monitor...