Panasonic Kx Ta824 Feature Guide

1.21 Audible Tone Features
Feature Guide 141
1.21.2 Confirmation Tone
Description
At the end of a feature operation, the PBX confirms the success of the operation by sending a confirmation 
tone to the extension user.
Conditions
 It is possible to eliminate confirmation tone 3 (except for Call Hold Retrieve with the Feature Number) 
through system programming.
Feature Guide References
4.2.1 Tones/Ring Tones
Ty p eDescription
Tone 1Sent when the setting is accepted, or sent when the Extension Lock...

1.21 Audible Tone Features
142 Feature Guide 

Feature Guide 143
Section 2
System Configuration and Administration 
Features 

2.1 System Configuration—Hardware
144 Feature Guide
2.1 System Configuration—Hardware
2.1.1 Extension Jack Configuration
Description
Extension jacks are used to connect proprietary telephones (PTs), single line telephones (SLTs), Direct 
Station Selection (DSS) Consoles, and Voice Processing Systems (VPSs) to the PBX.
Conditions
PT and SLT in Parallel Mode 
A PT and an SLT can be connected to an extension jack and used in parallel mode.
DSS Console and Paired Telephone Assignment 
When a DSS Console is...

2.2 System Configuration—Software
Feature Guide 145
2.2 System Configuration—Software
2.2.1 Class of Service (COS)
Description
Each extension is assigned a class of service (COS) number ( TRS-COS—Day/Night/Lunch [601-603]). 
The following features operate differently depending on an extensions COS.
a)TRS ( 1.8.1 Toll Restriction (TRS))
b)Walking COS ( 1.8.4 Walking COS)
Conditions
Walking COS 
An extension user can make a call from an extension with a lower COS by using his or her own COS 
temporarily....

2.2 System Configuration—Software
146 Feature Guide
2.2.2 Group
Description
This PBX supports various types of groups. 
1.Outside (CO) Line Group 
Outside (CO) lines can be grouped into 8 outside (CO) line groups based on proper ties such as carrier 
or outside (CO) line type (
 CO Line Group Number [404]).  
Each outside (CO) line can belong to only one outside (CO) line group. 
2.Extension Group 
Extensions can be grouped into 8 extension groups ( Extension Group [600]).  
Each extension group can have...

2.2 System Configuration—Software
Feature Guide 147
With AA must be selected as the destination of incoming outside (CO) line calls via the DISA 
feature (
 DISA Incoming Call Dial Mode [500]). 
Feature Guide References
1.2.1 Idle Extension Hunting
1.2.2 Direct Inward System Access (DISA) Ring
1.4.1.3 Call Pickup
1.13.1 Paging 

2.2 System Configuration—Software
148 Feature Guide
2.2.3 Time Service
Description
Time service modes are used by many PBX features to determine how they will function during different 
times of day. For example, incoming calls can be directed to sales staff during the day and to a Voice 
Processing System (VPS) at night, extension users can be prohibited from making long-distance calls 
during lunch time, etc. 
 
There are 3 time service modes—day, night, and lunch. The start times of each time service...

2.2 System Configuration—Software
Feature Guide 149
[Visualization of Time Schedule]
Note that time service modes can be arranged as they are needed (for example, night mode can occur 
in the morning and afternoon, if necessary) and not all time service modes need to be used in a time 
schedule. Also note that day mode or night mode resumes automatically when lunch mode ends.
 
3.Programming Items Using Time Service 
The following programming items will be affected by the time service:
a)Flexible Outward...

2.2 System Configuration—Software
150 Feature Guide
User Manual References
1.7.7 Checking the Time Service Mode
2.1.2 Switching the Time Service Mode (Time Service)