Panasonic Kx Ta824 Feature Guide

2.2 System Configuration—Software
Feature Guide 151
2.2.4 Operator/Manager Features
Description
This PBX supports one operator and one manager. Any extension can be designated as the operator 
through system programming (
 Operator Assignment [008]). The operator is the destination of Operator 
Call. The extension connected to extension jack 01 is the manager extension. An extension assigned as the 
operator or manager extension is allowed to use certain features that most extensions cannot, as follows:...

2.2 System Configuration—Software
152 Feature Guide
Operator Call 
An extension user can call the operator by entering the Operator Call number 0. If no operator is assigned, 
the caller will hear a reorder tone.
User Manual References
1.2.1 Basic Calling
2.1 Control Features
301st Incoming Call Logged in the 
Common AreaSelects how new calls are 
treated when Incoming Call 
Log for the common area is 
full.Not required 1.15.2 Incoming 
Call Log
Outgoing Message (OGM)Records and plays back 
OGMs used by...

2.3 System Data Control
Feature Guide 153
2.3 System Data Control
2.3.1 PC Programming
Description
System programming settings can be accessed using a PC and the Panasonic KX-TE Maintenance 
Console software as well as by using a proprietary telephone (PT) (
 2.3.2 PT Programming). System 
programming and data upload/download can be performed either through on-site programming or remote 
programming. 
1.On-site Programming: Programming that is performed using an on-site PC connected directly to 
the PBX....

2.3 System Data Control
154 Feature Guide
2.Connection Methods for Remote Programming
Conditions
 Only one system programming session is permitted at a time. Access will be denied to a second party 
who tries to perform system programming, including system programming via a PT.
 System programming can be performed either in interactive or batch mode.
System Password  
To access system programming in interactive mode, a valid password must be entered. The password 
is set at the factory but can be...

2.3 System Data Control
Feature Guide 155
Feature Guide References
1.1.1.1 Direct In Line (DIL)
3.2 PC Programming 

2.3 System Data Control
156 Feature Guide
2.3.2 PT Programming
Description
A proprietary telephone (PT) can be used to customize the settings of the PBX or of an extension, using the 
following programming features:
Conditions
 The manager extension is the extension that is connected to the lowest-numbered jack (jack 01) of the 
PBX and can therefore perform manager programming.
 Only one system programming (including PC programming) or manager programming session is 
permitted at a time. These 2...

2.3 System Data Control
Feature Guide 157
f)Speed dial: The System Speed Dialing numbers and names in System Speed Dialing Number 
[001] and System Speed Dialing Name [011]
Installation Manual References
2.10.1 Starting the Advanced Hybrid System
Feature Guide References
2.2.4 Operator/Manager Features
3.3 PT Programming
User Manual References
3.1 Customizing Your Phone (Personal Programming)
3.2 Customizing Your PBX (System Programming) 

2.3 System Data Control
158 Feature Guide
2.3.3 Automatic Time Adjustment
Description
The PBX clock can be adjusted automatically according to the time information received from your 
telephone company. Time information can be received when an incoming call with Caller ID that includes 
time information is received. 
 
The PBX clock will be adjusted every day with the first call after 3:05 A.M., if enabled through system 
programming (
 Automatic Time Adjustment [152]). 
Note
Since the PBX clock is put...

2.3 System Data Control
Feature Guide 159
2.3.4 Feature Numbering
Description
To call another extension user or to access PBX features, access numbers (extension numbers or feature 
numbers) are required.
Feature numbers are available while:
1.a dial tone is heard
2.a busy, Do Not Disturb (DND), ringback tone is heard
3.dialing or talking
4.on-hook 
1.Feature Numbering (available while a dial tone is heard) 
Extension numbers and features that are available while a dial tone is heard have fixed numbers...

2.3 System Data Control
160 Feature Guide
Executive Busy Override Deny (set/cancel)733(0/1) + #
Extension Lock (set/cancel)770000–9999 (2 times/one time) + 
#
Extension Number100–199
External Feature Access (EFA) for an SLT6
Extension Feature Clear79#
FWD—Follow Me (set/cancel)71(5/8) + extn. no. + #
FWD to BV (set/cancel)71([1 or 2 + 725]/0) + #
FWD to Voice Processing System (VPS) 
(set/cancel)71([1 or 2 + extn. no.]/0) + #
Group Call Pickup40
Hot Line for an SLT (program/set/cancel) 74([2 + phone...