Panasonic Kx Ta824 Feature Guide

3.3 PT Programming
Feature Guide 191
1.5.2.3 Account Code Entry
1.8.2 Toll Restriction (TRS) Override by Account Code
Account Code Mode [605]
Automatic Pause Insertion Code [311]
Feature & Programming References
1.5.2.5 Pause Insertion
Pause Time [417]
TRS—Extension Lock Class [312]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
1.8.3 Extension Lock
CO Line Connection [400]
Feature & Programming References
1.5.3.2 Line Preference—Outgoing
1.5.3.3 Outside (CO) Line Access
311NEXTpause...

3.3 PT Programming
192 Feature Guide
Dial Mode [401]
Feature & Programming References
1.5.2.4 Dial Type Selection
Pulse Speed [402]
Feature & Programming References
1.5.2.4 Dial Type Selection
Dial Mode [401]
Host PBX Access Code [403]
Note
Insert , (CONF/MESSAGE button) between each access code using the comma button on the overlay. 
For example, to store access codes 81 and 82 on outside (CO) line 1, program as follows:
 
403 NEXT 1 81,82 STORE END
Feature & Programming References
1.5.2.6 Host PBX...

3.3 PT Programming
Feature Guide 193
CO Line Group Number [404]
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
2.2.2 Group
Flexible Outward Dialing—Day/Night/Lunch [405-407]
Note
It is impossible to disable all extensions for all outside (CO) lines in each time service mode (day/night/
lunch). In each mode, at least one extension must be allowed to make an outside (CO) line call.
Feature & Programming References
1.5.3.2 Line Preference—Outgoing
1.5.3.3 Outside (CO) Line Access...

3.3 PT Programming
194 Feature Guide
Flexible Ringing—Day/Night/Lunch [408-410]
Feature & Programming References
1.1.3.2 Outside (CO) Line Ringing Selection
1.4.1.2 Line Preference—Incoming
Delayed Ringing—Day/Night/Lunch [411-413]
Feature & Programming References
1.2.2 Direct Inward System Access (DISA) Ring
1.4.1.2 Line Preference—Incoming
4XNEXTSTOREEND
(1…
8/    )
(08…
10)(01…
24/    )
(     Enable/
Disable)
SELECT
or
SELECT#
Go to another jack number
Go to another line number
Go to next or prev....

3.3 PT Programming
Feature Guide 195
CO Line Mode—Day/Night/Lunch [414-416]




Note
After you select BV, do not change Operator Assignment [008].
Feature & Programming References
1.1.1.1 Direct In Line (DIL)
4XNEXTCO line no. name*END
(1…
8/    )(    Normal/MODEM)
(14…
16)
SELECT
SELECT
NEXTPREVor
To continue
To continue14: for day
15: for night
16: for lunch
STORE
4XNEXTCO line no.BV no.STOREEND
(1…
8/    )(BV)(01…
24)
SELECT
NEXTPREVor
To continue
To continue
(14…
16)
14: for day
15: for night
16: for...

3.3 PT Programming
196 Feature Guide
1.14.6 Direct Inward System Access (DISA)
1.14.7 Built-in Voice Message (BV)
2.3.1 PC Programming
Flexible Ringing—Day/Night/Lunch [408-410]
Pause Time [417]
Feature & Programming References
1.5.2.5 Pause Insertion
1.5.2.6 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Automatic Pause Insertion Code [311]
Host PBX Access Code [403]
Flash/Recall Time [418]
Feature & Programming References
1.9.6 Flash/Recall
1.9.7 External Feature Access...

3.3 PT Programming
Feature Guide 197
Feature & Programming References
1.5.3.2 Line Preference—Outgoing
1.5.3.3 Outside (CO) Line Access
CPC Signal Detection—Incoming [420]
Note
CPC signal detect time selection number:
00: Disable; 01–75: 22–614 ms (detect time: 8 ms increments)
Feature & Programming References
1.9.10 Calling Party Control (CPC) Signal Detection
CPC Signal Detection—Outgoing [421]
Note
When this program is disabled, CPC Signal Detection is only activated during an incoming outside (CO)...

3.3 PT Programming
198 Feature Guide
Disconnect Time [422]
Note
The time you select must be longer than the requirements of your telephone company or host PBX.
Feature & Programming References
1.9.6 Flash/Recall
CO Line Ring Tone Pattern [423]
Note
It is recommended that you set a different ring tone pattern from the ring tone patterns specified in 
Extension Ring Tone Pattern [115] and Doorphone Ring Tone Pattern [706].
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
Local...

3.3 PT Programming
Feature Guide 199
Local Carrier-based Voice Mail Access Dial [436]
Feature & Programming References
1.18.3 Local Carrier-based Voice Mail Service
Extension Access to Local Carrier-based Voice Mail [437]
Feature & Programming References
1.18.3 Local Carrier-based Voice Mail Service
DISA IRNA to BV—Day/Night/Lunch [438-440]
436NEXTCO line no.STOREEND
(1…
8)
SELECT
NEXTPREVor
To continue
To continue
voice mail service 
access no.
Max. 32 digits
(0…
9,    , #, P, –, F, [ ])
All-Not stored...

3.3 PT Programming
200 Feature Guide
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
DISA Incoming Call Dial Mode [500]
Note
Without AA: Available destinations are extension numbers assigned in Extension Number [009], 
Outside (CO) Line Access numbers (9, 81 through 88), and the Operator Call number (0) 
With AA: Available destinations are numbers available in Without AA mode and numbers (0 through 
9) assigned in 
DISA Built-in AA [501]
Feature & Programming References
1.14.6 Direct...