Home > Panasonic > System > Panasonic Kx Ta824 Feature Guide

Panasonic Kx Ta824 Feature Guide

Here you can view all the pages of manual Panasonic Kx Ta824 Feature Guide. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 181

3.3 PT Programming
Feature Guide 181
SLT Hold Mode [104]
Feature & Programming References
1.11.1 Call Hold
Conference Tone [105]
Feature & Programming References
1.7.2 Executive Busy Override
1.12.1.2 Conference
External Pager Access Tone [106]
Feature & Programming References
1.13.1 Paging
DTMF Receiver Check [107]
Note
This program enables each DTMF receiver to check whether it is operating normally or not.  
DTMF receiver number:
1–2: checking extension jacks 01–08
3–4: checking extension jacks 09–16...

Page 182

3.3 PT Programming
182 Feature Guide
Note
This program enables a locked extension to send a flash/recall signal during a conversation with an 
outside party.
CO Indicator [109]
Note
This program is available for the extension(s) assigned not to ring in Flexible Ringing—Day/Night/Lunch 
[408-410], to answer incoming outside (CO) line calls.
Flash/Recall Key Mode [110]
Feature & Programming References
1.9.6 Flash/Recall
1.9.7 External Feature Access (EFA)
Music on Hold [111]
Feature & Programming...

Page 183

3.3 PT Programming
Feature Guide 183
Extension Ring Tone Pattern [115]
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.5.1.1 Intercom Call
4.2.1 Tones/Ring Tones
Call Pickup Tone [117]
Feature & Programming References
1.4.1.3 Call Pickup
Pulse Restriction [118]
Note
It is programmable whether pulse dialing is sent or not to the telephone company during a conversation 
with an outside party when Pulse or Call Block mode is enabled in 
Dial Mode [401].
Redialing after Pulse to Tone...

Page 184

3.3 PT Programming
184 Feature Guide
Note
This program selects the ringback tone pattern for outgoing intercom calls and for incoming outside 
(CO) line calls (including a DISA call).
Feature & Programming References
1.5.1.1 Intercom Call
1.14.6 Direct Inward System Access (DISA)
4.2.1 Tones/Ring Tones
VM 1 APT Port [130]
Notes
 To change the current setting (other than Disable), select Disable, then select the desired 
setting.
 This program is not available when Enable is selected in DTMF Integration...

Page 185

3.3 PT Programming
Feature Guide 185
1.1.3.3 Ring Tone Pattern Selection
SLT Ring Bell-on Time [143]
SLT Ring Bell-on Time [143]
Notes
 This program selects the length of the bell-on signal of an SLT. This determines the ring tone 
pattern for incoming calls to SLTs, combined with the setting in 
SLT Ring/Silence Ratio [142].
 This program also determines the maximum number of digits of an SLT Caller ID number, when 
DTMF1 or DTMF2 is selected in 
SLT Caller ID Signaling Type [150].
Feature &...

Page 186

3.3 PT Programming
186 Feature Guide
SMS Routing Table—Extension [147]
Note
Each location 1–8 has a maximum of 10 extensions.
Feature & Programming References
1.16.3 Call Routing for Fixed Line SMS
SLT Caller ID Signaling Type [150]
Feature & Programming References
1.15.1 Caller ID
SLT Caller ID Line Access Number [151]
Feature & Programming References
1.15.1 Caller ID
Automatic Time Adjustment [152]
Feature & Programming References
2.3.3 Automatic Time Adjustment
147NEXTextension jack no.STOREEND...

Page 187

3.3 PT Programming
Feature Guide 187
Hold Recall Time [200]
Feature & Programming References
1.11.1 Call Hold
1.11.2 Call Park
Transfer Recall Time [201]
Feature & Programming References
1.10.1 Call Transfer
Call Forwarding Start Time [202]
Feature & Programming References
1.3.1.2 Call Forwarding (FWD)
Hot Line Waiting Time [203]
Feature & Programming References
1.6.1.6 Hot Line
Call Duration Counter Start [204]
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)...

Page 188

3.3 PT Programming
188 Feature Guide
CO-to-CO Line Call Duration [205]
Feature & Programming References
1.9.8 Outside-to-Outside (CO-to-CO) Line Call Duration
Dialing Start Time [206]
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
Inter-digit Time [208]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
No Dial Disconnection [211]
No Dial Disconnection [211]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
Inter-digit Time [208]
BV Recording Time [214]
Feature &...

Page 189

3.3 PT Programming
Feature Guide 189
Common/Personal OGM Recording Time [215]
Note
This program selects the maximum recording time for each personal/common OGM.
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
Carrier Exception Code [300]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
TRS—System Speed Dialing Class [301]
Feature & Programming References
1.6.1.5 Speed Dialing—Personal/System
1.8.1 Toll Restriction (TRS)
TRS—COS 2-5 Denied Code [302-305]...

Page 190

3.3 PT Programming
190 Feature Guide
Feature & Programming References
1.8.1 Toll Restriction (TRS)
TRS—Exception Code [306]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
TRS—COS 2-5 Denied Code [302-305]
Emergency Number [309]
Feature & Programming References
1.5.2.2 Emergency Call
1.8.1 Toll Restriction (TRS)
Account Code [310]
Feature & Programming References
306NEXTcode no.phone no.STOREEND
(01…
80)
SELECT
NEXTPREVor
To continue
To continue
Max. 11 digits
(0…
9,    , #, x)
All-Not...

Start reading Panasonic Kx Ta824 Feature Guide

Related Manuals for Panasonic Kx Ta824 Feature Guide

All Panasonic manuals