Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

4.2 System Programming
Pulse Speed Selection
402
System Programming  4-63
DescriptionAn outside (CO) line set for pulse or call blocking mode in program
[401] “Dial Mode” can have two pulse rates, 10 pps (low) and
20 pps (high). This program sets the pulse speed for each outside
(CO) line which has set the pulse or call blocking mode.
Selection• Outside (CO) line number: 1 – 6,  ( = all outside (CO) lines)
• Low Speed(10 pps)/ High Speed(20 pps)
DefaultAll outside (CO) lines – Low Speed...

4-64 System Programming
4.2 System Programming
Host PBX Access Codes
403
DescriptionAssigns Host PBX access codes. If the system is installed behind a
host PBX system, an access code is required to make an outside
call. Up to eight codes can be stored for an outside (CO) line
connected to the host PBX.
Selection• Outside (CO) line number: 1 – 6,  ( = all outside (CO) lines)
• Access code: 1 or 2 digits, eight different entries (max.)
DefaultAll outside (CO) lines – Not stored
Programming1.Enter 403....

4.2 System Programming
Host PBX Access Codes (contd.)
403
System Programming  4-65
Conditions• This program is only required if a host PBX is connected to the system.
• There is a maximum of eight access codes per outside (CO) line. Each
code has one or two digits, consisting of 0 – 9.
• When the programmed codes are dialed, Automatic Pause Insertion and
Toll Restriction are applied to all calls. The programmed pause time (in
program [417] “Pause Time”) is automatically inserted after the access
code.
•...

4-66 System Programming
4.2 System Programming
Outside (CO) Line Group Assignment
404
DescriptionEach outside (CO) line must be assigned to an outside (CO) line
group (trunk group). This program defines the outside (CO) line
group assignment for each outside (CO) line. For example, if there
are multiple telephone service companies available, the outside
(CO) lines can be grouped by company.
Selection• Outside (CO) line number: 1 – 6,  ( = all outside (CO) lines)
• Outside (CO) line group (Trunk) number: 1...

4.2 System Programming
Flexible Outward Dialing Assignment — Day/Night/Lunch
405–407
System Programming  4-67
DescriptionDetermines which outside (CO) lines can be accessed by an
extension in the day, night and lunch modes. The extension users
can make outgoing outside calls using the assigned outside (CO)
lines.
Selection• Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Jack number: 01 – 24, ( = all jacks)
• Enable / Disable
DefaultAll outside (CO) lines – Enable — Day/Night/Lunch...

4-68 System Programming
4.2 System Programming
Flexible Ringing Assignment — Day/Night/Lunch
408–410
DescriptionAllows more than one extension to ring in the day, night and lunch
modes. All incoming calls from the programmed outside (CO) lines
are directed to the specified extensions.
Selection• Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll outside (CO) lines – all jacks – Enable — Day/Night/Lunch
Programming1.Enter a...

4.2 System Programming
Flexible Ringing Assignment — Day/Night/Lunch (contd.)
408–410
System Programming  4-69
Conditions• An extension can be assigned as the destination for as many outside
(CO) lines required.
• To assign all jacks or all outside (CO) lines to the same selection, press
the  key in step 3 or step 4. In these cases, the display will show:
CO :# :Mixed.
Feature ReferencesSection 3, Features
Ringing, Delayed
Time (Day/Night/Lunch) Service 

4-70 System Programming
4.2 System Programming
Delayed Ringing Assignment — Day/Night/Lunch
411–413
DescriptionAssigns the ringing start time for each jack in the day, night and
lunch modes.
Selection• Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)
• Jack number: 01 – 24, ( = all jacks)
• Immdtly (immediate ringing)/ 5 sec / 10 sec / 15 sec
DefaultAll outside (CO) lines – all jacks – Immdtly — Day/Night/Lunch
Programming1.Enter a program address (411 for day, 412 for night or 413
for...

4.2 System Programming
Delayed Ringing Assignment — Day/Night/Lunch (contd.)
411–413
System Programming  4-71
Conditions• To assign all jacks or outside (CO) lines to the same selection, press the
key in step 3 or step 4. In these cases, the display will show:
CO :# :Mixed.
• There are four notification methods.
(1) Immediate ringing: rings immediately
(2) 5 second delay
(3) 10 second delay
(4) 15 second delay
Feature ReferencesSection 3, Features
Ringing, Delayed
Time (Day/Night/Lunch) Service 

4-72 System Programming
4.2 System Programming
Outside (CO) Line Mode — Day/Night/Lunch
414–416
DescriptionSelects the mode of an incoming outside call on each outside (CO)
line in the day, night and lunch modes. There are the following four
modes.
Normal: an incoming outside call will be received at the
extension(s) assigned in programs [408]–[410].
DIL: an incoming outside call will be received at the assigned
extension.
DISA1: an incoming outside call will be received at an extension
through the DISA...