Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

4.2 System Programming
Extension Name Setting
604
System Programming  4-103
DescriptionAssigns names to the extensions.
Selection• Jack number: 01 – 24
• Name: 10 characters (max.)
DefaultAll jacks – Not stored
Programming1.Enter 604.
Display: Extension Name
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display: #01:
4.Enter a name.
For entering characters, see Section 4.1.3 “Entering Characters”.
To delete the current entry, press CLEAR.
To change...

4-104 System Programming
4.2 System Programming
Account Code Entry Mode
605
DescriptionSelects the account code input mode for each extension jack. There
are four account code modes: Option, Forced, Verify-All and
Verify-Toll.
Option mode:The user can enter any account code, if
needed.
Forced mode:The user must always enter an account code.
The code can be any number.
Verify – All mode:The user must always enter a pre-assigned
account code to make an outside call.
Verify – Toll mode:The user can enter an...

4.2 System Programming
Account Code Entry Mode(contd.)
605
System Programming  4-105
Conditions• To assign all jacks to the same selection, press the  key in step 3. In
this case, the display will show:# :Mixed.
• Program [310] “Account Codes” is used to define the Account Codes for
the Verify modes.
• Programs [601]–[603] “TRS – Class of Service (COS) Assignment —
Day/Night/Lunch” is used to assign a Class of Service to each extension.
Feature ReferencesSection 3, Features
Account Code Entry
Toll...

4-106 System Programming
4.2 System Programming
Call Transfer to an Outside (CO) Line
606
DescriptionEnables or disables performing the Call Transfer to an Outside
(CO) Line feature.
Selection• Jack number: 01 – 24, ( = all jacks)
• Enable / Disable
DefaultDisable
Programming1.Enter 606.
Display: Transfer to CO
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example: #01:Disable
4.Keep pressing SELECTuntil the desired selection is
displayed....

4.2 System Programming
Call Forwarding to an Outside (CO) Line
607
System Programming  4-107
DescriptionEnables or disables performing the Call Forwarding to an Outside
(CO) Line feature.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable 
Programming1.Enter 607.
Display: CO Forward
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example: #01:Disable
4.Keep pressing SELECTuntil the desired selection...

4-108 System Programming
4.2 System Programming
Executive Busy Override
608
DescriptionEnables or disables performing Executive Busy Override –
Extension/Outside (CO) Line. Executive Busy Override allows a
user to interrupt an established call.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable
Programming1.Enter 608.
Display: Busy Override
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example:...

4.2 System Programming
Do Not Disturb Override
609
System Programming  4-109
DescriptionEnables or disables performing the Do Not Disturb (DND)
Override feature.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable
Programming1.Enter 609.
Display: DND Override
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example: #01:Disable
4.Keep pressing SELECTuntil the desired selection is
displayed.
5.Press...

4-110 System Programming
4.2 System Programming
Paralleled Telephone Connection
610
DescriptionA Paralleled Telephone Connection allows a single line telephone
to be connected to the same jack as a proprietary telephone. This
program assigns which jacks can perform the paralleled telephone
connection feature.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable
Programming1.Enter 610.
Display: Parallel Connect
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack...

4.2 System Programming
TAM (Telephone Answering Machine) Extension
611
System Programming  4-111
DescriptionAssigns the jacks that can accept a TAM connection. When a jack
is TAM-enabled, the “Call Retrieving from a TAM” feature
becomes available.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable
Programming1.Enter 611.
Display: TAM Extension
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example:...

4-112 System Programming
4.2 System Programming
Room Monitor Assignment
612
DescriptionAssigns which extensions can be monitored by another telephone.
Selection• Jack number: 01 – 24, ( = all jacks)
• Disable / Enable
DefaultAll jacks – Disable
Programming1.Enter 612.
Display: Room Monitor
2.Press NEXT.
Display: Jack NO? ®
3.Enter a jack number.
Pressing NEXTalso can enter jack number 01.
Display example: #01:Disable
4.Keep pressing SELECTuntil the desired selection is
displayed.
5.Press STORE.
6.To...