Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

4.2 System Programming
Caller ID SMDR Format
906
System Programming  4-133
DescriptionSelects whether a Caller ID number is printed out or not on the
SMDR.
SelectionWithout CID (not printed)/ With CID (printed)
DefaultWith CID
Programming1.Enter 906.
Display: CID SMDR Format
2.Press NEXT.
Display example: With CID
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditions• Even if a name is also sent by the Caller ID service, only the number is
printed.
• An...

4-134 System Programming
4.2 System Programming
ROM Version
998
DescriptionConfirms the System ROM version.
Display example: Y501B 980430(M)
Version Date
Programming1.Enter 998.
Display: ROM Version
2.Press NEXT.
The display shows the system ROM version.
3.Press END.
ConditionsNone
Feature ReferencesNone 

4.2 System Programming
System Data Clear
999
System Programming  4-135
DescriptionClears the system data which have been programmed. The system
will re-start with the default settings.
SelectionAll Para / System Para / CO Para + outside (CO) line number:
1 – 6, ( = all outside (CO) lines)/ 
Ext Para + jack number: 01 – 24,( = all jacks)/ 
DSS Para + DSS Console number: 1 or 2, ( = all DSS
Consoles)/ Speed Dial
Programming1.Enter 999.
Display: System Clear
2.Press NEXT.
Display: Menu:All Para
3.Keep...

4-136 System Programming 

Section 5
List
This section lists the tone, ring and default values of 
system programming.  

5.1 Tone/Ring Tone
5-2 List
1 s
Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Dial Tone 1
Dial Tone 2
Dial Tone 3
Busy Tone 
Reorder Tone
Ringback Tone
< TONE >
Do Not Disturb (DND) Tone
Outside-to-Outside 
(CO-to-CO) Line 
Call Limit Warning Tone
Call Waiting Tone 1
Call Waiting Tone 2
(Single)
5 s
Call Waiting Tone 2
(Double)
Call Waiting Tone 2
(Triple)
Hold Alarm
15 s
15 s 

5.1 Tone/Ring Tone
List 5-3
1 s
Incoming Calls (Single) /
Hold Recall (Outside calls)
Callback Ringing (Camp-on 
Recall) / Doorphone Ringing 
(S-Double)
< RING TONE >
Incoming Calls (Double) /
Hold Recall (Intercom calls)
Incoming Calls (Triple) / 
Timed Reminder 

Address ProgramDefault
5.2 Default Values
5-4 List[000] Date and Time Setting
[001] System Speed Dialing Entry
[002] System Password
[003] DSS Console Port Assignment
[004] Paired Telephone Assignment for DSS
Console
[005] One-Touch Transfer Using a DSS Button
[006] Time (Day/Night/Lunch) Service
Changing Mode
[007] Time (Day/Night/Lunch) Service Start
Time
[008] Operator Assignment
[009] Extension Number Assignment
[010] LCD Time Display Selection
[100] Hunting Group Set
[101] Station Hunting Type
[102]...

DefaultAddress Program
5.2 Default Values
List 5-5
[115] Extension Ringing Pattern Selection
[117] Call Pickup Tone
[118] Pulse Restriction
[119] Redialing After Pulse to Tone Conversion
[125] Toll Restriction Check for  and #
[130] Voice Mail 1 APT Port for KX-TVS50
[131] Voice Mail 2 APT Port for KX-TVS50
[200] Hold Recall Time
[201] Transfer Recall Time
[202] Call Forwarding Start Time
[203] Pickup Dial Delay Time
[204] Call Duration Count Start Time
[205] Outside-to-Outside (CO-to-CO) Line
Duration...

DefaultAddress Program
5.2 Default Values
5-6 List[400] Outside (CO) Line Connection
Assignment
[401] Dial Mode
[402] Pulse Speed Selection
[403] Host PBX Access Codes
[404] Outside (CO) Line Group Assignment
[405]–[407] Flexible Outward Dialing
Assignment — Day/Night/Lunch
[408]–[410] Flexible Ringing Assignment
— Day/Night/Lunch
[411]–[413] Delayed Ringing Assignment
— Day/Night/Lunch
[414]–[416] Outside (CO) Line Mode
— Day/Night/Lunch
[417] Pause Time
[418] Flash Time
[419] Automatic Designated...