Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

							4.2 System Programming
Caller ID SMDR Format
906
System Programming  4-133
DescriptionSelects whether a Caller ID number is printed out or not on the
SMDR.
SelectionWithout CID (not printed)/ With CID (printed)
DefaultWith CID
Programming1.Enter 906.
Display: CID SMDR Format
2.Press NEXT.
Display example: With CID
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditions• Even if a name is also sent by the Caller ID service, only the number is
printed.
• An optional Caller ID card is required.
Feature ReferencesSection 3, Features
Caller ID
Station Message Detail Recording (SMDR) 
						

							4-134 System Programming
4.2 System Programming
ROM Version
998
DescriptionConfirms the System ROM version.
Display example: Y501B 980430(M)
Version Date
Programming1.Enter 998.
Display: ROM Version
2.Press NEXT.
The display shows the system ROM version.
3.Press END.
ConditionsNone
Feature ReferencesNone 
						

							4.2 System Programming
System Data Clear
999
System Programming  4-135
DescriptionClears the system data which have been programmed. The system
will re-start with the default settings.
SelectionAll Para / System Para / CO Para + outside (CO) line number:
1 – 6, ( = all outside (CO) lines)/ 
Ext Para + jack number: 01 – 24,( = all jacks)/ 
DSS Para + DSS Console number: 1 or 2, ( = all DSS
Consoles)/ Speed Dial
Programming1.Enter 999.
Display: System Clear
2.Press NEXT.
Display: Menu:All Para
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.If CO Para, Ext Para or DSS Para is selected, enter an
outside (CO) line, jack or DSS Console number.
6.Press STORE.
7.Press END.
Condition• Please refer to program [804] for each parameter.
Feature ReferenceSection 3, Features
System Data Default Set 
						

							4-136 System Programming 
						

							Section 5
List
This section lists the tone, ring and default values of 
system programming.  
						

							5.1 Tone/Ring Tone
5-2 List
1 s
Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Dial Tone 1
Dial Tone 2
Dial Tone 3
Busy Tone 
Reorder Tone
Ringback Tone
< TONE >
Do Not Disturb (DND) Tone
Outside-to-Outside 
(CO-to-CO) Line 
Call Limit Warning Tone
Call Waiting Tone 1
Call Waiting Tone 2
(Single)
5 s
Call Waiting Tone 2
(Double)
Call Waiting Tone 2
(Triple)
Hold Alarm
15 s
15 s 
						

							5.1 Tone/Ring Tone
List 5-3
1 s
Incoming Calls (Single) /
Hold Recall (Outside calls)
Callback Ringing (Camp-on 
Recall) / Doorphone Ringing 
(S-Double)
< RING TONE >
Incoming Calls (Double) /
Hold Recall (Intercom calls)
Incoming Calls (Triple) / 
Timed Reminder 
						

							Address ProgramDefault
5.2 Default Values
5-4 List[000] Date and Time Setting
[001] System Speed Dialing Entry
[002] System Password
[003] DSS Console Port Assignment
[004] Paired Telephone Assignment for DSS
Console
[005] One-Touch Transfer Using a DSS Button
[006] Time (Day/Night/Lunch) Service
Changing Mode
[007] Time (Day/Night/Lunch) Service Start
Time
[008] Operator Assignment
[009] Extension Number Assignment
[010] LCD Time Display Selection
[100] Hunting Group Set
[101] Station Hunting Type
[102] Voice Mail Port for KX-TVS75/
KX-TVS100
[103] DTMF Integration for KX-TVS75/
KX-TVS100
[104] Hold Mode Selection
[105] Conference Tone
[106] External Paging Access Tone
[107] DTMF Receiver Check
[108] Flash Mode for a Station Locked
Extension
[109] CO Indicator Assignment
[110] Flash Key Mode
[111] Hold Music Selection
[112] DSS Console Indication Mode
98 Jan. 1 Thu 12:00 AM
All speed dial numbers – Not stored
1234
All DSS Consoles — Disable
DSS1 – Disable, DSS2 – Disable
With Transfer
Manual
Every day of the week 
— Day – 9:00 AM / Night – 5:00 PM / 
Lunch-S – None / Lunch-E – None
Jack-01
Jack 01 – 24 = Ext 101 – 124
12 HOUR
All extension groups — Disable
All extension groups – Terminate
All jacks — Disable
Disable
Hold-1
Enable
Enable
All DTMF receivers — Enable
Disable
Enable
MODE 2
External
Enable 
						

							DefaultAddress Program
5.2 Default Values
List 5-5
[115] Extension Ringing Pattern Selection
[117] Call Pickup Tone
[118] Pulse Restriction
[119] Redialing After Pulse to Tone Conversion
[125] Toll Restriction Check for  and #
[130] Voice Mail 1 APT Port for KX-TVS50
[131] Voice Mail 2 APT Port for KX-TVS50
[200] Hold Recall Time
[201] Transfer Recall Time
[202] Call Forwarding Start Time
[203] Pickup Dial Delay Time
[204] Call Duration Count Start Time
[205] Outside-to-Outside (CO-to-CO) Line
Duration Time Limit
[206] Dialing Start Time
[208] Interdigit Time
[211] No Dial Disconnection
[300] Carrier Code Assignment
[301] Toll Restriction — System Speed
Dialing Boundary Class
[302]–[305] Toll Restriction — Class 2 – 5
Denied Codes
[306] Toll Restriction — Exception Codes
[309] Emergency Dial Number Set
[310] Account Codes
[311] Automatic Pause Insertion Codes
[312] Toll Restriction — Station Lock
Boundary ClassDouble
Enable
Enable
Disable
Enable
Disable
Disable
30 sec
30 sec
15 sec delay
3 sec
10 s after dial
10 min
0 msec
10 sec
Disable
All codes – Not stored
Boundary Class-1
All codes – Not stored
All codes – Not stored
Code-01 = 911, Other Codes = Not stored
All codes – Not stored
All codes – Not stored
Disable 
						

							DefaultAddress Program
5.2 Default Values
5-6 List[400] Outside (CO) Line Connection
Assignment
[401] Dial Mode
[402] Pulse Speed Selection
[403] Host PBX Access Codes
[404] Outside (CO) Line Group Assignment
[405]–[407] Flexible Outward Dialing
Assignment — Day/Night/Lunch
[408]–[410] Flexible Ringing Assignment
— Day/Night/Lunch
[411]–[413] Delayed Ringing Assignment
— Day/Night/Lunch
[414]–[416] Outside (CO) Line Mode
— Day/Night/Lunch
[417] Pause Time
[418] Flash Time
[419] Automatic Designated Outside (CO)
Line Access
[420] Calling Party Control (CPC) Signal
[421] CPC Detection for Outgoing Calls
[422] Disconnect Time
[423] Outside (CO) Line Ringing Pattern
Selection
[500] DISA Incoming Dialing Mode Selection
[501] DISA Built-in Auto Attendant
[502] OGM Mode Selection
[503] FAX Connection
[504] DISA Delayed Answer Time
[505] DISA Waiting Time After OGMAll outside (CO) lines – Connect
All outside (CO) lines — DTMF Mode
All outside (CO) lines – Low Speed
All outside (CO) lines – Not stored
CO1 — TRK GRP-1; CO2 — TRK GRP-2;
CO3 — TRK GRP-3; CO4 — TRK GRP-4;
CO5 — TRK GRP-5; CO6 — TRK GRP-6
All outside (CO) lines – all jacks – Enable 
— Day/Night/Lunch
All outside (CO) lines – all jacks – Enable
— Day/Night/Lunch
All outside (CO) lines – all jacks – Immdtly
— Day/Night/Lunch
All outside (CO) lines – Normal
All outside (CO) lines — 1.5 sec
All outside (CO) lines – 600 ms
All outside (CO) lines — Enable
All outside (CO) lines – 42 (350 msec)
Disable
All outside (CO) lines – 1.5 sec
Single
Without AA
All numbers — Not stored
MODE 1
Disable
3 sec
5 sec