Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

4.2 System Programming
Voice Mail 2 APT Port for KX-TVS50 †
131
System Programming  4-43
DescriptionEnables or disables the extension jack numbers 15, or 15 and 16
corresponding to the voice mail APT ports for data transmission to
the Panasonic Voice Processing System (KX-TVS50). 
Selection• Port 15 / Port 15 & 16 / Disable
DefaultAll jacks — Disable
Programming1.Enter 131.
Display: VM2(APT)Port
2.Press NEXT.
Display example: Port:Disable
3.Keep pressing SELECTuntil the desired selection is
displayed....

4-44 System Programming
4.2 System Programming
Hold Recall Time
200
DescriptionAssigns the length of the hold recall timer. This timer is used to
alert an extension that a call has been held for an extended period of
time.
SelectionTime: 30 sec / 1 min / 1.5 min / 2 min / 3 min / 4 min / 5 min /
6 min / Disable(= Hold Recall disabled) (seconds/minutes)
Default30 sec
Programming1.Enter 200.
Display: Hold Recall Time
2.Press NEXT.
Display example: Time:30 sec
3.Keep pressing SELECTuntil the desired...

4.2 System Programming
Transfer Recall Time
201
System Programming  4-45
DescriptionAssigns the length of the transfer recall timer. If a transferred call is
not answered within the programmed time, the call will be returned
to the original caller.
SelectionTime: 15 sec / 30 sec / 1 min / 2 min (seconds/minutes)
Default30 sec
Programming1.Enter 201.
Display: Transfer Recall
2.Press NEXT.
Display example: Time:30 sec
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press...

4-46 System Programming
4.2 System Programming
Call Forwarding Start Time
202
DescriptionSets the time for the Call Forwarding – No Answer feature. If a call
is not answered within the programmed time, the call will be
forwarded to the destination.
Selection5 sec delay / 10 sec delay / 15 sec delay / 20 sec delay (seconds)
Default15 sec delay
Programming1.Enter 202.
Display: Call FWD Delay
2.Press NEXT.
Display example: 15sec delay
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press...

4.2 System Programming
Pickup Dial Delay Time
203
System Programming  4-47
DescriptionSets the length of time for the Pickup Dialing feature. If the
telephone user lifts the handset, the programmed party will be
called when the time expires. This delay gives the user an
opportunity to enter numbers before automatic dialing occurs.
Selection1 sec / 2 sec / 3 sec / 4 sec (seconds)
Default3 sec
Programming1.Enter 203.
Display: Pickup Dial Time
2.Press NEXT.
Display example: PUD Time:3sec
3.Keep pressing...

4-48 System Programming
4.2 System Programming
Call Duration Count Start Time
204
DescriptionSets the number of seconds the system waits between the end of
dialing and the start of the SMDR timer for outgoing toll calls.
When the system has sent all the digits to the central office and this
timer expires, the system will start counting the call. A display
telephone shows the elapsed time of the call. The starting time and
the duration of a call are recorded in the SMDR record.
SelectionInstantly / 5 s /...

4.2 System Programming
Outside-to-Outside (CO-to-CO) Line Duration Time Limit
205
System Programming  4-49
DescriptionSets the maximum time allowed for a conversation between two
external parties. When the timer expires, the Outside-to-Outside
(CO-to-CO) Line call is disconnected.
SelectionTime (minutes): 1 – 32
Default10 min
Programming1.Enter 205.
Display: CO-CO Dur. Limit
2.Press NEXT.
Display example: Time:10min
3.Enter the time.
To change the current entry, press CLEARand enter the new time.
4.Press...

4-50 System Programming
4.2 System Programming
Dialing Start Time
206
DescriptionSets the number of milliseconds the system waits before dialing
after an outside (CO) line is seized.
Selection0 msec / 250 msec / 500 msec / 750 msec / 1000 msec /
1250 msec / 1500 msec (milliseconds)
Default0 msec
Programming1.Enter 206.
Display: Dial Start Time
2.Press NEXT.
Display example: Time:   0 msec
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsNone
Feature...

4.2 System Programming
Interdigit Time
208
System Programming  4-51
DescriptionAssigns the maximum time allowed between digits for an outgoing
outside call.
Selection5 sec / 10 sec / 15 sec (seconds)
Default10 sec
Programming1.Enter 208.
Display: Interdigit Time
2.Press NEXT.
Display example: Time:10 sec
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditions• The interdigit timer applies until the toll restriction check is completed.
When the timer expires,...

4-52 System Programming
4.2 System Programming
No Dial Disconnection
211
DescriptionEnables or disables disconnecting an outside (CO) line if an
extension user does not dial anything within 10 seconds after an
outside (CO) line is seized.
SelectionEnable (disconnect)/ Disable (does not disconnect)
DefaultDisable
Programming1.Enter 211.
Display: No Dial Mode
2.Press NEXT.
Display example: Disable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Condition• The...