Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

4.2 System Programming
CO Indicator Assignment
109
System Programming  4-33
DescriptionAssigns whether or not an extension user can answer an incoming
outside call when they were was not assigned to receive calls in
programs “[408]–[410] Flexible Ringing Assignment — Day/
Night/Lunch”.
SelectionEnable(A CO button indicator will flash when a call is received.
An extension user can answer the call by pressing the
flashing button.)
Disable(A CO button indicator lights when a call is received, but
an extension...

4-34 System Programming
4.2 System Programming
Flash Key Mode
110
DescriptionAssigns sending a flash signal when the FLASH button on a
proprietary telephone is pressed.
SelectionMODE 1(A flash signal is sent during the time programmed in
program “[418] Flash Time”)
MODE 2(A flash signal is sent while the FLASH button is
pressed.)
DefaultMODE 2
Programming1.Enter 110.
Display: Flash Key
2.Press NEXT.
Display example:MODE 1
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press...

4.2 System Programming
Hold Music Selection
111
System Programming  4-35
DescriptionUsed to determine the music source use for Music on Hold for
outside calls.
SelectionExternal / Tone
DefaultExternal
Programming1.Enter 111.
Display: Hold Music
2.Press NEXT.
Display example:External
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditions• The external music source is a user-supplied item. One music source can
be installed.
• If “Tone” is assigned, the...

4-36 System Programming
4.2 System Programming
DSS Console Indication Mode
112
DescriptionEnables or disables the Busy Lamp Field (BLF) on DSS buttons to
indicate the Forward (FWD) or Do Not Disturb (DND) status of
corresponding extensions.
SelectionEnable(FWD/DND — flashing)/ Disable(FWD/DND — off)
DefaultEnable
Programming1.Enter 112.
Display: DSS Indication
2.Press NEXT.
Display example:Enable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsNone...

4.2 System Programming
Extension Ringing Pattern Selection
115
System Programming  4-37
DescriptionSelects the extension ringing pattern when an intercom call is
received.
The ringing patterns are shown below.
SelectionSingle / Double / Triple
DefaultDouble
Programming1.Enter 115.
Display: Ext Ring pattern
2.Press NEXT.
Display example: Double
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
Conditions• The extension ringback tone is the same as the pattern...

4-38 System Programming
4.2 System Programming
Call Pickup Tone
117
DescriptionEnables or disables the confirmation tone sent when the Call pickup
feature is activated.
SelectionEnable / Disable
DefaultEnable
Programming1.Enter 117.
Display: Call Pickup Tone
2.Press NEXT.
Display example: Enable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsNone
Feature ReferencesSection 3, Features 
Call Pickup, Directed
Call Pickup, Group 

4.2 System Programming
Pulse Restriction
118
System Programming  4-39
DescriptionEnables or disables sending pulse dialing to the Central Office
during a conversation with an external party, when Pulse or Call
block is selected in program [401] “Dial Mode”.
SelectionEnable / Disable
DefaultEnable
Programming1.Enter 118.
Display: Pulse Restrict
2.Press NEXT.
Display example: Enable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsNone
Feature...

4-40 System Programming
4.2 System Programming
Redialing After Pulse to Tone Conversion
119
DescriptionEnables or disables sending tone dialing to the Central Office when
an extension user redials after changing from pulse to tone mode by
pressing and #.
SelectionEnable / Disable
DefaultDisable
Programming1.Enter 119.
Display: Redial After  #
2.Press NEXT.
Display example: Disable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press STORE.
5.Press END.
ConditionsNone
Feature...

4.2 System Programming
Toll Restriction Check for  and #
125
System Programming  4-41
DescriptionAssigns whether the entered “ ” and “#” are checked by toll
restriction or not. This assignment is required for certain Central
Offices to prevent toll fraud. Some Central Offices ignore the
user-dialed “ ” and “#”. If the user’s Central Office ignores these
symbols, select “Disable”.
SelectionEnable(check)/ Disable (does not check)
DefaultEnable
Programming1.Enter 125.
Display: TRS Check for  #
2.Press...

4-42 System Programming
4.2 System Programming
Voice Mail 1 APT Port for KX-TVS50 †
130
DescriptionEnables or disables the extension jack numbers 07, or 07 and 08
corresponding to the voice mail APT ports for data transmission to
the Panasonic Voice Processing System (KX-TVS50).
Selection• Port 7 / Port 7 & 8 / Disable
DefaultAll jacks — Disable
Programming1.Enter 130.
Display: VM1(APT)Port
2.Press NEXT.
Display example: Port:Disable
3.Keep pressing SELECTuntil the desired selection is
displayed.
4.Press...