Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

Features 3-139
3 FeaturesV
Conditions• A maximum of two VPSs can be connected to the system.
• A maximum of four extension jacks (07, 08, 15 and 16) of the system
can be connected to VPSs with four-conductor wire. Extension jack
number 07, or jack numbers 07 and 08 can be the voice mail APT ports
for VPS1 in program [130]. Extension jack number 15, or jack numbers
15 and 16 can be for VPS2 in program [131].
• When “Port 7 & 8” is selected in program [130], extension jack
numbers 07 and 08 will be in...

3-140 Features
V3 Features
Connection Reference
Section 2, Installation
2.3.4 Extension Connection
Programming References
Section 4, System Programming
[009] Extension Number Assignment
[100] Hunting Group Set
[101] Station Hunting Type
[130] Voice Mail 1 APT Port for KX-TVS50
[131] Voice Mail 2 APT Port for KX-TVS50
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
[411]–[413] Delayed Ringing Assignment — Day/Night/Lunch
[414]–[416] Outside (CO) Line Mode — Day/Night/Lunch
[507] DISA Intercept...

Features 3-141
3 FeaturesV
Outside Call
System
ExtensionPort 1
Port 4
Port 2
Port 3
VM Hunting
Chain KX-TVS75/KX-TVS100
Port 1
Port 4
Port 2
Port 3
VM Hunting
Chain KX-TVS75/KX-TVS100
C.FWD DIL, DISA
Intercom
Call
Voice Mail Integration for KX-TVS75/KX-TVS100
DescriptionThis system supports Voice Processing System (VPS) equipment
(Panasonic KX-TVS75/KX-TVS100) by sending DTMF tones
described in program [103]. The DTMF tones sent to a VPS
indicate the state of a call (busy, answered, ringing,...

3-142 Features
V3 Features
Outside Call
System
ExtensionPort 1
Port 2
Port 3
Port 4
Intercept DISAKX-TVS75/KX-TVS100
1.2 DISA Intercept to VM
If the VPS is set as the Intercept destination of an outside (CO)
line, an outside call will be forwarded to the VPS. The system
will send the VPS the extension mailbox number at that time.
Therefore, the calling party can leave their message in the
mailbox of the desired extension without knowing the mailbox
number. Delayed Ringing must be assigned to voice mail...

Features 3-143
3 FeaturesV
Outside Call
System
ExtensionAA 1AA 2
AA 4AA 3
AA Hunting
Chain KX-TVS75/KX-TVS100
TransferDIL
2. Automated Attendant (AA) Service
2.1 AA to Extension
AA receives and answers outside calls and offers services such
as transferring to an extension or mailbox using DTMF
signaling, which is sent from the calling party.
Outside Call
System
Extension
AA 1
AA 2
Normal
Immediately
10 s delay
15 s delay
KX-TVS75/100
2.2 Extension Backup
If the voice mail extensions are assigned to ring...

3-144 Features
V3 Features
Conditions• A VPS can be assigned as the destination for the following features.
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
DISA Intercept Routing – No Answer
For these features, the caller does not need to know the mailbox number
of the called extension because the code is automatically transmitted to
the VPS (Follow On ID feature). If a DISA call is transferred to the VPS
by Intercept Routing from a ring group, the system will transmit the
mailbox number of...

Features 3-145
3 FeaturesV
Volume Control – Handset Receiver/Headset/Ringer/Speaker
DescriptionAllows a proprietary telephone user to change the following as
desired.
Handset receiver volume 
Headset volume
Ringer volume
Speaker volume 
Condition• The procedure is as follows.
Slide the following levers located on the left side of the telephone.
Volume Control (MIN – MAX)
Handset (Headset) Volume Selector (NORMAL – HIGH)
Ringer Volume Selector (OFF / LOW / HIGH) 
Programming References
No programming...

3-146 Features
W3 Features
Walking COS
DescriptionAllows a user who is not at their own telephone to override the toll
restriction COS number of another extension. At the other
extension, the user dials their extension password. For the duration
of the call, the COS of the extension is changed to the COS of their
own extension. 
Conditions• When a user makes a call using this feature, the user’s extension number
will be displayed on the SMDR, not the extension where the user made
the call.
• If the...

Section 4
System Programming
This section provides step-by-step programming instructions 
for a proprietary telephone.  

4.1 General Programming Instructions
4-2 System Programming
Default Setting
This system has factory default settings. If any of the programming
needs to be changed, the necessary information will be found in
Section 3, “Features”. This makes the system very simple to install
and customize as required by the customer. Any required changes
can be written in the “Programming Tables”.
Required Telephone Set
One of the following telephone sets is required for system
programming.
• Proprietary Telephone (PT):...