Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

Features 3-99
3 FeaturesP
Pause Insertion, Automatic
DescriptionThis feature is used to insert a pre-assigned pause between the
outside (CO) line access number, the host PBX code, carrier code
or code assigned in program [311] and the dialed number.
Conditions• This feature requires programming the host PBX codes, carrier codes
and automatic pause insertion codes as well as the pause duration
beforehand.
• This feature works for Speed Dialing, One-Touch Dialing, Last Number
Redial, Saved Number Redial,...

3-100 Features
P3 Features
Personal Speed Dialing
DescriptionAllows an extension user to store frequently dialed numbers in
order to place a call quickly. This is done by dialing the feature
number and a speed dial number, from 0 to 9. Up to 10 numbers
with a maximum of 24 digits per number can be stored in each
telephone.
Conditions• For PT users, it is impossible to use this feature if One-Touch Dialing
buttons are assigned to PF buttons. If the user assigns, a personal speed
dialing number, the number...

Features 3-101
3 FeaturesP
Pickup Dialing
DescriptionAllows a single line telephone user to make an outgoing call by
going off-hook, if the user has stored the telephone number
beforehand. This feature is also known as Hot Line.
Conditions• A proprietary telephone and rotary telephone cannot program this
feature.
• The user uses a feature number to activate or deactivate pickup dialing. 
• If the feature is activated and the user goes off-hook, a dial tone will be
generated for the delay time and then...

3-102 Features
P3 Features
Power Failure Transfer
DescriptionIf a power failure occurs, or the system is off-line, specific
extension telephones are automatically connected to specific
outside (CO) lines. This provides an outside (CO) line call between
the following extensions and outside (CO) lines.
Outside (CO) line 1 is connected to extension jack number 01.
Outside (CO) line 4 is connected to extension jack number 09.
A single line telephone can work during a power failure. Connect a
single line...

Features 3-103
3 FeaturesP
Pulse to Tone Conversion
DescriptionThis feature allows the extension user to change from pulse dialing
to tone (DTMF) dialing so that the user can access special services,
such as computer-accessed long distance calls or voice mail
services.
Conditions• This feature only works for outside (CO) lines which have set the Pulse
Dialing mode or Call Blocking mode.
• The user can select the dial mode for each outside (CO) line using the
Dial Type Selection feature.
• Changing from...

3-104 Features
R3 Features
Redial, Last Number 
DescriptionEvery telephone in the system automatically saves the last
telephone number dialed to an outside (CO) line and allows the
extension user to dial the same number again.
Conditions• With a proprietary telephone, the REDIAL button is used to carry out
Last Number Redial. With a single line telephone, the feature number is
used.
Programming References
No programming required.
Operation ReferenceTelephone Features
— User ManualRedial, Last Number...

Features 3-105
3 FeaturesR
Remote Station Lock Control
DescriptionThe operator and manager are given the privilege of controling
Electronic Station Lockout and Call Log Lock at any station.
Conditions• Remote Station Lock Control has higher priority over Electronic Station
Lockout and Call Log Lock. If Electronic Station Lockout or Call Log
Lock has already been set by the extension user and Remote Station
Lock is set by the operator or manager, canceling the lock is only
possible by the operator or...

3-106 Features
R3 Features
Ringing, Delayed
DescriptionA telephone is originally set to ring immediately. This feature can
be changed to delayed ringing or no ringing (disable) on an outside
(CO) line number basis.
Conditions• This feature does not apply to DISA or DIL calls. If the destination is a
ring group, the delayed ringing feature will work.
• The extension can answer an incoming call during no ring or the delay
time by pressing the flashing button.
Programming References
Section 4, System...

Features 3-107
3 FeaturesR
Ringing, Discriminating
DescriptionAllows the extension user to identify an incoming call by its ringing
pattern. (See section 5.1, “Tone/Ring Tone”.)
Conditions• If multiple incoming calls arrive at an on-hook extension
simultaneously, priority is generally on a “first-come, first-serve” basis.
For proprietary telephones (PT), when the Prime Line Preference –
Incoming feature has been set, this line has priority.
• A PT user can select a desired ringing pattern for each outside...

3-108 Features
R3 Features
Ringing Pattern Selection for Intercom Calls and Outside (CO) Lines
DescriptionAllows an extension user to select the desired ringing pattern for an
intercom call and each outside (CO) line. This distinguishes
incoming outside calls from intercom calls.
Conditions• There are three ringing patterns available. One of them can be assigned
to an intercom call and an outside (CO) line. Available ringing patterns
are as follows.
1 s
Single:
Double:
Triple:
• Each extension user can...