Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

Features 3-59
3 FeaturesE
Emergency Call
DescriptionAllows the extension user to call a pre-assigned emergency number
regardless of any restrictions.
Conditions• Up to five emergency numbers can be stored. “911” is already stored by
the default setting.
• An emergency number can be dialed even in the following cases:
— in Account Code – Verify –  All and Forced modes,
— in any toll restriction COS number, and
— in Electronic Station Lockout.
Programming Reference
Section 4, System Programming
[309]...

3-60 Features
E3 Features
Executive Busy Override – Extension
DescriptionAllows a pre-assigned extension user to interrupt an existing
extension call, either between two inside parties or an external and
inside party, to establish a three-party conference call. Extension
users can prevent this feature from being executed by another
extension user (Executive Busy Override Deny).
Conditions• System programming determines which extension users can perform
Executive Busy Override.
• This feature will not...

Features 3-61
3 FeaturesE
Executive Busy Override – Outside (CO) Line
DescriptionAllows a proprietary telephone user to interrupt an existing outside
call, either between two external parties or an external and inside
party, to establish a three-party conference call. Extension users can
prevent this feature from being executed by another extension user
(Executive Busy Override Deny).
Conditions• System programming determines which extension users can perform
Executive Busy Override.
• This feature will...

3-62 Features
E3 Features
Extension Group
DescriptionThe system supports eight extension groups. Any member of an
extension group can pick up a call directed to another group
member (Group Call Pickup) or can make a voice announcement to
another group member (Paging – Group). In addition, the Station
Hunting feature can be enabled for each extension group. A DISA
ring group is a specific extension group.
Condition• Each extension should belong to an extension group, but cannot belong
to more than one...

Features 3-63
3 FeaturesE
External Feature Access
DescriptionAllows an extension user to access the features of a host PBX or
Central Office, such as Call Waiting, etc. This is performed by
putting the current party on hold and sending a flash signal.
Conditions• This feature is effective only during an outside call. However, if the
FLASH feature (Disconnection signal) is activated by the user, this
feature will not work.
• The flash time must be assigned as required by the host PBX or outside
(CO) line.
•...

3-64 Features
F3 Features
Facsimile Detection
DescriptionWhen the system receives a facsimile transmission signal by Direct
Inward System Access (DISA), it automatically connects the
specified facsimile extension.
Conditions• The extension which can receive facsimile data must be assigned by
system programming.
• An optional OGM/FAX Detection Card must be installed.
Connection Reference
Section 2, Installation
2.4.2 Caller ID and OGM/FAX Detection Card Installation
Programming References
Section 4, System...

Features 3-65
3 FeaturesH
Handset/Headset Selection
DescriptionThe system supports the use of headsets on proprietary telephones
(KX-T7030 and KX-T7130 only).
Conditions• The headset is an user supplied item.
• To set the headset mode on a PT, use the handset/headset selector
provided on the set and/or the headset.
Programming References
No programming required.
Feature ReferencesNone
Operation ReferenceConfiguration 
—User ManualInitial Settings
Hands-free Answerback
DescriptionAllows the speakerphone...

3-66 Features
H3 Features
Hands-free Operation
DescriptionAllows a proprietary telephone user to dial and talk to the other
party without lifting the handset. Pressing the appropriate button
provides the hands-free mode.
Conditions• This feature can be utilized by pressing one of the following buttons
when the SP-PHONE/MONITOR button indicator is off:
SP-PHONE button, MONITOR button, INTERCOM button, or CO
button.
• The KX-T7050 and the KX-T7055 can be used for hands-free dialing
operations, etc., but...

Features 3-67
3 FeaturesH
Hold Alarm/Hold Recall
DescriptionPrevents a call on hold from being kept waiting longer than a
pre-determined time. If the timer expires, ringing or an alarm tone
is generated as a reminder to the user who held the call. If the user
is on-hook and their SP-PHONE/MONITOR button is off, the
phone will ring. If the user is off-hook or in the hands-free mode
when the timer expires, an alarm tone will be sent to the built-in
speaker of a proprietary telephone (PT) or the handset...

3-68 Features
H3 Features
Host PBX Access
DescriptionThe system may be installed behind an existing host PBX. This is
performed by connecting a line from the host to an outside (CO)
line in the Advanced Hybrid System.
Conditions• A Host PBX Access Code is required to access outside (CO) lines of the
host PBX.
• A pause, if programmed, can be inserted between the user-dialed Host
PBX Access Code and the digits which follow (Automatic Pause
Insertion). Program the pause time required by the Host PBX for...