Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

Features 3-9
3 FeaturesB
Button, Flexible
DescriptionThe use of Flexible Buttons is determined by station programming.
The following four types of Flexible Buttons are provided on
proprietary telephones (PT) and DSS Consoles:
• Flexible CO buttons (provided on a PT only)
• Flexible Direct Station Selection (DSS) buttons (provided on a
DSS Console only)
• MESSAGE button (provided on a PT except for the KX-T7055)
• Programmable Feature (PF) buttons
The table below shows all of the features which can be...

3-10 Features
B3 Features
Condition• Incoming and outgoing calls on a line are shown in the following
priority.
Single-CO > Group-CO
Programming References
Station Programming RRRRRRRRRRUser Manual
Flexible Button Assignment
DSS Console Features (KX-T7040) RRRRUser Manual
Feature ReferencesSection 3, Features 
Buttons on Proprietary Telephones
DSS Console (KX-T7040)
Operation ReferencesNot applicable. 

Features 3-11
3 FeaturesB
Button, Group-CO (G-CO)
DescriptionTo support efficient utilization of outside (CO) lines, a group of
outside (CO) lines (outside (CO) line group) can be assigned to a
CO button. The function is referred to as Group-CO (G-CO). Any
incoming call from any outside (CO) line in the outside (CO) line
group arrives at the G-CO button. To make an outside call, the user
can access an idle outside (CO) line in the group by simply pressing
the assigned G-CO button.
Conditions• A G-CO...

3-12 Features
B3 Features
Button, Other-CO (O-CO)
DescriptionOutside (CO) lines, which are not assigned to a S-CO or G-CO
button, can be assigned to a flexible CO button on a proprietary
telephone (PT). The assigned button serves as the Other-CO
(O-CO) button. An incoming call on an outside (CO) line arrives at
the O-CO. To make an outside call, the PT user simply presses the
assigned O-CO button.
Conditions• An O-CO button is not originally provided on a PT. A flexible CO
button can be assigned as an O-CO...

Features 3-13
3 FeaturesB
Button, Single-CO (S-CO)
DescriptionA Single-CO (S-CO) button is an outside (CO) line access button.
This allows a proprietary telephone user to access a specific line by
pressing a S-CO button. An incoming call can be directed to a
S-CO button.
Conditions• The default setting for CO buttons is changeable. (Flexible CO Button)
• A S-CO button provides outside (CO) line status.
• One outside (CO) line can be assigned to both a S-CO and a Group-CO
(G-CO) button.
• Incoming calls...

3-14 Features
B3 Features
Buttons on Proprietary Telephones
DescriptionProprietary telephones are provided with the feature/line access
buttons listed below.
KX-T Proprietary Telephones
4: The button is provided on the designated telephone.
v: The button has a LED (Light Emitting Diode).
* : Buttons which can be changed to function as a feature button are called
flexible buttons.
!: The button does not have a LED.
(x): Shows the number of buttons only if more than one button is provided.
AUTO...

Features 3-15
3 FeaturesB
The functions of the listed buttons are described below.
AUTO ANSWER/MUTE:Used for answering an extension
automatically, or turns the microphone off during a conversation.
AUTO DIAL/STORE:Used for System Speed Dialing and storing
program changes.
CO (Central Office line):Can make or receive an outside call or
can be re-assigned to a different CO or various feature buttons.
CONF (Conference):Used to establish a three-party conference.
FLASH:Allows you to disconnect the current...

3-16 Features
C3 Features
Caller ID
DescriptionProvides a display proprietary telephone user with the caller’s
information, such as their name and telephone number, on the
outside (CO) line assigned to receive Caller ID service calls.
Conditions• The outside (CO) lines where the Caller ID service is offered by a
Central Office must be assigned.
• A display PT (KX-T7030 or KX-T7130) user can record the caller
information received by Caller ID (Call Log, Incoming feature).
• If the Caller ID service...

Features 3-17
3 FeaturesC
CALL FORWARDING FEATURES – SUMMARY
DescriptionCall Forwarding features enable an extension user to have their
calls forwarded to a specified destination. The user may determine
the conditions of how their calls will be forwarded. The following
Call Forwarding features are available:
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
Call Forwarding – Follow Me
Call Forwarding – to an Outside (CO) Line
Call Forwarding – All Calls
DescriptionThis feature is used when a...

3-18 Features
C3 Features
Call Forwarding – Busy/No Answer
DescriptionA user’s calls are forwarded to another extension if their extension
is busy or they do not answer the call within a pre-determined time.
Conditions• The types of calls which are forwarded by this feature are:
Outside calls – DIL; DISA; Normal
Intercom calls – Extension; Transfer
• The extensions which have been already assigned as the forwarded
destination cannot set the Call Forwarding feature.
• Although calls can be forwarded,...