Panasonic Kx-Ta624 Advanced Hybrid System Installation Manual

Features 3-19
3 FeaturesC
Call Forwarding – Follow Me
DescriptionIf a user forgets to set Call Forwarding – All Calls before they leave
their desk, this allows them to set the same feature from the
destination extension.
Condition• Same as the conditions for Call Forwarding – All Calls.
Programming Reference
Station Programming RRRRRRRRRRUser Manual
Flexible Button Assignment – FWD/DND Button
Feature ReferenceSection 3, Features
Call Forwarding – All Calls
Operation ReferenceTelephone Features
— User...

3-20 Features
C3 Features
Call Forwarding – to an Outside (CO) Line
DescriptionCalls directed to an extension will be sent to an external destination.
The outside telephone number must be pre-programmed.
Conditions• The types of calls which are forwarded by this feature are:
Outside calls – DIL; DISA
Intercom calls – Extension; Transfer
• The forwarding extension’s Toll Restriction and Account Code Entry
requirements still apply. 
• If the Do Not Disturb (DND) feature has already been set, setting the...

Features 3-21
3 FeaturesC
Call Hold – Intercom
DescriptionThis is used to place an intercom call on hold. The held call can be
retrieved by the user who held it or by any other extension.
Conditions• Only one intercom call can be placed on hold (up to ten calls in the
system – Call Park). With a proprietary telephone, outside calls and one
intercom call can be placed on hold at the same time. With a single line
telephone, either one outside or intercom call can be held.
• If a call on hold is not...

3-22 Features
C3 Features
Call Hold – Outside (CO) Line
DescriptionAllows an extension user to put an outside call on hold. The held
call can be retrieved by the user who held it or by any other
extension.
Conditions• With a single line telephone, the user can hold only one call, either an
extension or outside call.
• Music is sent to the party on hold, if available (Music on Hold).
• If a call on hold is not retrieved within a specific period of time, Hold
Alarm/Hold Recall occurs.
• If an external party...

Features 3-23
3 FeaturesC
Call Hold, Exclusive – Intercom
DescriptionAllows a proprietary telephone user to prevent other extension users
from retrieving a held intercom call. Only the user who held the call
can retrieve it.
Conditions• Only one intercom call can be placed on Call Hold or Exclusive Call
Hold at a time.
• If a call on hold is not retrieved within a pre-assigned period of time,
Hold Alarm/Hold Recall occurs.
• This feature is not available for single line telephones.
Programming Reference...

3-24 Features
C3 Features
Call Hold Retrieve – Intercom
DescriptionAllows an extension user to retrieve a call that has been placed on
hold by another extension. 
ConditionA confirmation tone is sent to the user when the hold is retrieved by
entering the feature number.
Programming References
No programming required.
Feature ReferenceSection 3, Features
Call Hold – Intercom
Operation ReferenceTelephone Features
— User ManualCall Hold Retrieve
Call Hold Retrieve – Outside (CO) Line
DescriptionAllows an...

Features 3-25
3 FeaturesC
Calling Party Control (CPC) Signal Detection
DescriptionThe Calling Party Control (CPC) Signal is an on-hook indication
(disconnect signal) sent from the outside (CO) line when the
telephone is hung up at the other end. To maintain efficient
utilization of outside (CO) lines, the system monitors their state and
when a CPC Signal is detected from a line, the system disconnects
the line and alerts the extension with a reorder tone.
Conditions• CPC Signal Detection is enabled or...

3-26 Features
C3 Features
Call Log, Incoming
DescriptionIf a display proprietary telephone (KX-T7030 or KX-T7130) user
cannot answer a call, the telephone will automatically record the
caller’s information. Moreover, the user can call back the caller by
checking the call log. This is available if a telephone receives
incoming outside calls using a Caller ID service. A maximum of 20
calls per telephone can be logged.
The displayed information is as follows:
• The received outside (CO) line number and...

Features 3-27
3 FeaturesC
Programming References
Section 4, System Programming
[900] Caller ID Assignment
[901] Caller ID Area Code Assignment
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long Distance Calls
[904] Caller ID Log Priority Selection
Feature ReferenceSection 3, Features
Caller ID
Operation ReferencesTelephone Features 
— User ManualCall Log, Incoming
Call Log Lock, Incoming
Operator/Manager Service Features
Remote Station Lock Control
Call Park...

3-28 Features
C3 Features
Call Pickup, Directed
DescriptionAllows an extension user to answer a call ringing at any other
extension.
Conditions• The user can pick up an incoming outside, intercom, or doorphone call.
• A confirmation tone is sent to the user when the call is picked up. The
tone can be disabled.
• Hold recalls and camp on recalls cannot be picked up.
Programming Reference
Section 4, System Programming
[117] Call Pickup Tone
Feature ReferencesNone
Operation ReferenceTelephone Features
— User...