Panasonic Kx P7305 Operating Instructions Manual
Have a look at the manual Panasonic Kx P7305 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 196
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
13
8Remove the check of the Use DHCP/BOOTP and Use LARP check box,
then enter IP address, Subnet Mask and Default Gateway. Click [OK].
9Confirm the setting and click [OK].
You will see the message “Update is completed. Do you wish to reset the printer?”.
10Click [Yes].](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-195.png "Page 196
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
13
8Remove the check of the Use DHCP/BOOTP and Use LARP check box,
then enter IP address, Subnet Mask and Default Gateway. Click [OK].
9Confirm the setting and click [OK].
You will see the message “Update is completed. Do you wish to reset the printer?”.
10Click [Yes].")
![Page 197
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
14
NOTE
• You cannot search for the printer while the printer is restarting.
• To confirm that the IP Address is set correctly,
(1) On your computer, click [Start], select Programs or All Programs, then click
MS-DOS Prompt. (for Windows 95 / Windows 98 / Windows Me)
Or
Command Prompt. (for Windows NT 4.0)
Or
Accessories - Command Prompt. (for Windows 2000 / Windows XP / Windows Server
2003)
(2) At the DOS prompt, type ping...](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-196.png "Page 197
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
14
NOTE
• You cannot search for the printer while the printer is restarting.
• To confirm that the IP Address is set correctly,
(1) On your computer, click [Start], select Programs or All Programs, then click
MS-DOS Prompt. (for Windows 95 / Windows 98 / Windows Me)
Or
Command Prompt. (for Windows NT 4.0)
Or
Accessories - Command Prompt. (for Windows 2000 / Windows XP / Windows Server
2003)
(2) At the DOS prompt, type ping...")
![Page 199
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
16
5Click on the Custom Printer Setup check button and click [Next >].
The Select Setup type window is displayed.
6Click on the Direct Print PC check button and click [Next >].](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-198.png "Page 199
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
16
5Click on the Custom Printer Setup check button and click [Next >].
The Select Setup type window is displayed.
6Click on the Direct Print PC check button and click [Next >].")
![Page 200
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
17
7Click on the Select the Network port for KX-P7310 check button and
click the printer you want to use, then click [Next >].
The Select installed options window is displayed.
8Select the installed options in your printer. Click [Next >].
The Select the default printer window is displayed.](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-199.png "Page 200
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
17
7Click on the Select the Network port for KX-P7310 check button and
click the printer you want to use, then click [Next >].
The Select installed options window is displayed.
8Select the installed options in your printer. Click [Next >].
The Select the default printer window is displayed.")
![Page 202
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
19
NOTE
• If another computers are set up using the shared folder through the network, share the
shared folder (Inst7305 by default) created by selecting [Yes] at step 10 (see “[A] Using the
shared folder on the other computer” on page 20).](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-201.png "Page 202
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
19
NOTE
• If another computers are set up using the shared folder through the network, share the
shared folder (Inst7305 by default) created by selecting [Yes] at step 10 (see “[A] Using the
shared folder on the other computer” on page 20).")
![Page 203
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
20
Step 4: Setting up another computer
If the shared folder has been created at the previous step 3, another computer can be simply
set up with the shared folder (see the method [A] or [B]). If the shared folder was not created,
set up the computer with the printer CD-ROM following the previous step 3.
[A] Using the shared folder on the other computer
1Open the shared folder of the other computer on the network.
2Double click...](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-202.png "Page 203
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
20
Step 4: Setting up another computer
If the shared folder has been created at the previous step 3, another computer can be simply
set up with the shared folder (see the method [A] or [B]). If the shared folder was not created,
set up the computer with the printer CD-ROM following the previous step 3.
[A] Using the shared folder on the other computer
1Open the shared folder of the other computer on the network.
2Double click...")
![Page 205
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
22
3Click Install Printer driver and Utilities.
The License Agreement window is displayed.
4Click [Yes].
5Click on the Custom Printer Setup check button and click [Next >].
The Select Setup type window is displayed.](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-204.png "Page 205
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
22
3Click Install Printer driver and Utilities.
The License Agreement window is displayed.
4Click [Yes].
5Click on the Custom Printer Setup check button and click [Next >].
The Select Setup type window is displayed.")
![Page 206
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
23
6Click on the Printer Server PC check button and click [Next >].
7Select the printer in the Select the current port or Select the Network
port for KX-P7310 list, then click [Next >].
The Select installed options window is displayed.](http://img.usermanuals.tech/thumb/58/66726/w64_kx-p7305_en_om_d-205.png "Page 206
Settings and Printing
Network Network Maintenance and Spec.
Setup in Windows
23
6Click on the Printer Server PC check button and click [Next >].
7Select the printer in the Select the current port or Select the Network
port for KX-P7310 list, then click [Next >].
The Select installed options window is displayed.")
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 18 NOTE • The installed options are automatically configured in the PCL printer driver if selecting the printer on the network at the previous step. The PostScript printer driver isn’t configured automatically. To configure this driver go the properties of the driver and select the Device, Device Settings or Device Options tab and manually configure the driver. 9Click on the desired check button for the default printer and click [Next >]. 10Click [Yes] or [No]. Ye s:The easy installer that enables printing to the same printer is created in the shared folder (Inst7305 by default). The easy installer allows the setting up with the same setting on other computers without the CD-ROM. For the detailed instructions, see “[A] Using the shared folder on the other computer” on page 20. No: A shared folder is not created. To setup another computer, the printer CD-ROM disk is required. NOTE •If you want to change the Destination Folder to install, click [Browse...]. Then follow the instructions on the screen to change the destination folder. 11(Click [OK] and) click [Finish].
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 19 NOTE • If another computers are set up using the shared folder through the network, share the shared folder (Inst7305 by default) created by selecting [Yes] at step 10 (see “[A] Using the shared folder on the other computer” on page 20).
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 20 Step 4: Setting up another computer If the shared folder has been created at the previous step 3, another computer can be simply set up with the shared folder (see the method [A] or [B]). If the shared folder was not created, set up the computer with the printer CD-ROM following the previous step 3. [A] Using the shared folder on the other computer 1Open the shared folder of the other computer on the network. 2Double click Setup.exe in the shared folder. The License Agreement window is displayed. 3Click [Yes]. InstallShiled Wizard Complete window is displayed. 4Click [Finish]. [B] Using the CD-R media The easy installer CD can be created by copying files in the shared folder on a CD-R. It excludes the time to inform the location of the shared folder on the network. 1Copy all files of the shared folder (ex. C:\Inst7305) on a CD-R media. 2Insert the CD-R to another computer. The License Agreement window is displayed. 3Click [Yes]. The setup program starts installing the printer driver and utilities. InstallShiled Wizard Complete window is displayed after the installation is finished. 4Click [Finish].
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 21 Step 1: Setting up TCP/IP on the computer (see page 8) Step 2: Setting up TCP/IP on the printer ( see page 8) Step 3: Setting up the printer driver and the printer port on the computer The following steps must be performed on the server computer. 1Insert the printer CD-ROM disk into the CD-ROM drive. The CD-ROM launches automatically. NOTE • If the CD-ROM does not launch automatically, perform the following steps. (1) Double click My computer icon (Windows XP / Windows Server 2003: Start - My Computer). (2) Double click the CD-ROM icon. 2(Click language and) click KX-P7310. LPR Port Printing - Printing through the shared computer (print server)
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 22 3Click Install Printer driver and Utilities. The License Agreement window is displayed. 4Click [Yes]. 5Click on the Custom Printer Setup check button and click [Next >]. The Select Setup type window is displayed.
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 23 6Click on the Printer Server PC check button and click [Next >]. 7Select the printer in the Select the current port or Select the Network port for KX-P7310 list, then click [Next >]. The Select installed options window is displayed.
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 24 8Select the installed options in your printer. Click [Next >]. The Select the default printer window is displayed. NOTE • The installed options are automatically configured in the PCL printer driver if selecting the printer on the network at the previous step. The PostScript printer driver isn’t configured automatically. To configure this driver go the properties of the driver and select the Device, Device Settings or Device Options tab and manually configure the driver. 9Click on the desired check button for the default printer and click [Next >].
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 25 10Confirm the shared printer name and change it if needed. Click [Next >].
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 26 11Click [Yes] or [No]. Ye s:The easy installer that enables printing through this server computer is created in the shared folder (Inst7305 by default). The easy installer allows the setting up on a client computer without the CD-ROM. For the detailed instructions, see “[A] Using the shared folder on the other computer” on page 27. No: A shared folder is not created. To setup a client computer, the printer CD-ROM disk is required. NOTE •If you want to change the Destination Folder to install, click [Browse...]. Then follow the instructions on the screen to change the destination folder. 12(Click [Yes] and) click [Finish]. NOTE • If client computers are set up using the shared folder through the network, share the shared folder (Inst7305 by default) created by selecting [Yes] at step 11 (see “[A] Using the shared folder on the other computer” on page 27).
Settings and Printing Network Network Maintenance and Spec. Setup in Windows 27 Step 4: Setting up the client computer If the shared folder has been created at the previous step 3, the client computer can be simply set up with the shared folder (see the method [A] or [B]). If the shared folder was not created, set up the computer with the printer CD-ROM following the method [C]. [A] Using the shared folder on the other computer 1Open the shared folder of the other computer on the network. 2Double click Setup.exe in the shared folder. The License Agreement window is displayed. 3Click [Yes]. InstallShiled Wizard Complete window is displayed. 4Click [Finish]. [B] Using the CD-R media The easy installer CD can be created by copying files in the shared folder on a CD-R. It excludes the time to inform the location of the shared folder on the network. 1Copy all files of the shared folder (ex. C:\Inst7305) on a CD-R media. 2Insert the CD-R to a client computer to set up. The License Agreement window is displayed. 3Click [Yes]. The setup program starts installing the printer driver and utilities. InstallShiled Wizard Complete window is displayed after the installation is finished. 4Click [Finish].