Panasonic Kx P7305 Operating Instructions Manual

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.19
1Open the front cover.
2Lift the drum unit up.
Jam at B 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.20
3Remove the jammed media from the output tray.
- Or -
Open the rear cover of the printer (1) and remove the jammed media 
(2).
2
1
CAUTION  HOT SURFACE 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.21
4Push the drum unit down.
5Close the front cover. 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.22
1Perform the jam recovery steps for Jam at A (see page 17).
- Or -
1Pull the media tray out of the printer.
2Slowly pull the jammed media (2) out of the printer while pushing the 
center tab (1) of the jam release pan down.
Jam at C
1
Rear side of
Printer
2 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.23
3Replace the media tray into the printer.
4Open and close the front cover to clear the error indication.
2
1 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.24
1Open the rear cover of the printer (1) and grasp both sides of the jammed 
media and slowly pull it out of the printer (2).
2Open and close the front cover to clear the error indication.
Jam at D
2
1
CAUTION  HOT SURFACE
2
1 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.25
1Perform the jam recovery steps for Jam at D (see page 24).
- Or -
1Pull the media tray out of the printer.
2Slowly pull the jammed media (2) out of the printer while pushing the 
center tab (1) of the jam release pan down.
Jam at E
1
Rear side of
Printer
2 
						

							Clearing a Jam
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.26
3Replace the media tray into the printer.
4Open and close the front cover to clear the error indication.
2
1 
						

							Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.27
Troubleshooting
Tr o u b l ePossible CauseCorrective Action
The background of the 
images is printed in gray.The toner cartridge has reached 
the end of useful life.Replace the toner cartridge.
The drum unit has reached the 
end of useful life.Replace the drum unit.
Incorrect type of media is used. Check the media usable or not 
(
see “Media” on page 53). 
Your printer is in extremely high 
humidity.Check the environment (
see 
“Specifications” on page 49
).
Faded image is printed at 
the different position from 
the original.Printer driver is not set correctly for 
paper.Set the media type setting of the 
printer driver correctly (
see 44 
,
91 or 110 in “Settings and 
Printing”).
The toner cartridge has reached 
the end of useful life.Replace the toner cartridge.
Your printer is in extremely high 
or low humidity.Check the environment (see 
“Specifications” on page 49)
Media is wet or dry. Set the Adjustment to media 
setting for + value (+1, +2 or 
+3) (see “Adjustment to Media” 
on page 41 in “Settings and 
Printing”).
ABCD--------
-----------------
--------
ABCD--------
-----------------
--------
ABCD--------
-----------------
-------- 
						

							Troubleshooting
Settings and Printing Network
Maintenance and Spec. Maintenance and Spec.28
Small dots are printed
at the different position
from the originalMedia is wet or dry. Set the Adjustment to media 
setting for – value (–1, –2 or
–3) (see “Adjustment to Media” 
on page 41 in “Settings and 
Printing”).
Toner spots appear on 
the page.Toner spots put on the 
photosensitive drum.Wipe the photosensitive drum 
with soft cloth (refer to 
“Cleaning the Photosensitive 
Drum” on page 37).
The drum unit is damaged. Replace the drum unit.
The corona wire in the drum unit is 
dirty.Clean the corona wire in the drum 
unit (
see “Cleaning the Printer” 
on page 8
).
The entire page prints in 
black.The drum unit is damaged. Replace the drum unit.
Tr o u b l ePossible CauseCorrective Action
ABCD--------
-----------------
--------
ABCD--------
-----------------
--------