Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

101
xMove the cross cursor onto an area to be deleted using
the arrows button and press the SET button.
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar.
→The VMD Setup window will be closed.
●Set the sensitivity
Set the sensitivity for the created motion detection area.
Sensitivity can be set for each area.
[Screenshot 1]
Start operation from the VMD Setup window.
zRotate the jog dial to select SENSITIVITY on the status
bar.
[Screenshot 2]
The sensitivity of the selected...

102

Move the cursor to the parameter box of each area
using the arrows button (
B) and select a moving dura-
tion for an object in each area from the following using
the arrows button (
DC).
--/5 s/10 s/20 s/30 s/40 s/50 s/1 m
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar, and press the SET button.
→The VMD Setup window will be closed.
●About the Detection mode
Perform the settings of the detection mode (method of
detection) in the set detection area. Specifying a...

103
•[Alarm Auto Reset]
The following are possible for the alarm auto reset.
When OFF is selected, the alarm display will not auto-
matically disappear.
To erase the alarm display, press the ALARM RESET
button.
OFF/1 s - 30 s (in 1 second intervals)
40 s/50 s/1 m/2 m/3 m4 m/5 m
•[Alarm Disarm]
The following are possible for the alarm disarm.
2 s - 10 s (in 1 second intervals)
r[Terminal Setup] Perform the settings for the
alarm terminal polarity. 
Select how to supply the signal to the alarm terminal....

Perform the settings for the recording schedules of record-
ing and event action by designating a day of the week and
time.
A day can be divided into up to 6 time zones, and record-
ing programs and event action programs can be assigned
to each time zone to create a recording schedule.
Up to 4 normal recording programs (REC Program) and up
to 4 event action programs (Event Program) can be creat-
ed. Perform the settings for the REC Program: resolution
and recording rate. Perform the settings for the...

105
● Recording Rate and Image Quality for Each
Camera Channel
Perform the settings for recording rate, image quality and
recording duration for each camera channel (only for event
pre-recording and event post-recording).
Perform the settings for each recording mode. Assign the
recording rate for each camera channel as described in
Recording Rate for Each Recording Mode above. 
The following are for the recording rate. When OFF is
selected, images from the selected camera channel will not
be recorded....

106
w[Event Program] Create event programs for an
event occurrence
Perform the settings of event action for each event type
(motion detection, video loss, terminal/command alarm)
or of auto copy.
● VMD
Perform the settings of event action at a motion detection or
the settings of the auto copy function.
Perform the settings for the following operation mode. Refer
to page 45 for further information about each operation
mode.
ACT DET (Activity Detection Mode):Performs only
recording, writing an event log...

[Screenshot 1]
Start operation after displaying the timetable window.
zPress the SET button.
[Screenshot 2]
The pop-up setting menu of the timetable for every day of
the week will be displayed.
The cursor will be displayed and will move to MON
(Monday).
xSelect a day of the week using the arrows button (CD)
and press the SET button.
Note:When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel the external
recording mode changeover terminal (pin no. 24) of
the unit will work with...

,Rotate the jog dial to select a desired REC program/
Event program.
(Rotating the jog dial changes the displayed REC pro-
gram.)
REC progam will be displayed with different colors.
Orange:REC program 1/Event program 1
Yellow:REC program 2/Event program 2
Pale purple:REC program 3/Event program 3
Indigo blue:REC program 4/Event program 4
Repeat steps 7 and 8 to assign REC program to other
timetables.
.Move the cursor to OK using the arrows button and
press the SET button.
→The REC program/Event program...

109
Perform the settings for image switching such as the
sequential display setting or the waiting screen (while log-
ging out) setting for displaying on monitors 1 and 2.
q[Monitor 1] Switcher function of monitor 1 
Perform the settings for the switcher function of monitor
1.
● Live Sequence
Perform the settings for the sequential display of live
images as follows.
[Screenshot 1]
Start operation from the Monitor1 menu of Switcher on
the SETUP MENU.
zMove the cursor to Live Sequence using the arrows...

110
●Auto Skip
Select ON of OFF to determine whether or not to skip the
camera channel without supplying the video input signal
because it is not connected, etc.
ON:Skips a channel if it is not connected.
OFF:Displays a black screen for a channel not connected.
●Login Screen
Select a camera image to be displayed during the login
procedure from the following.
CAM1 - 16:Displays an image from the selected camera
channel.
QUAD1 - 4:Displays images from the camera channels 1 -
4 on a 4-split screen.
QUAD5 -...