Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

It is possible to stop the sequential display by
pressing a camera selection button.
It is possible to stop the sequential display by
pressing a camera selection button. Sequential display ON
(For the WJ-HD316)
Sequential display ON
(For the WJ-HD309)SEQUENCE
SEQUENCE
SEQ
7
SHIFT+
4&2
4
SHIFT+
Switches in the following order each time the
button is pressed
1 - 4 CH 
→5 - 8 CH →9 - 12 CH →13 - 16 CH
→1 - 7 CH →1 - 9 CH →10 - 16 CH 
→1 - 13 CH →1 - 16 CH
Switches in the following order each time the
button...

62
OPERATION USING A PC
It is possible to perform the settings or operate the unit
using a web browser installed on a PC when this unit is
connected to a network.
The available features and the system requirements of a
PC are as follows.
Refer to the Network Operating Instructions (PDF) on the
provided CD-ROM.
■ Features
It is possible to operate this unit using a web browser in
much the same way as using the buttons on the front panel
of this unit.
The following functions are available when using a PC...

63
1. Remove the rubber legs (6 pcs.) on the bottom of the
unit.
•Use a flat-blade screwdriver and remove the screws.
2. Install the rack mounting brackets on both sides of the
unit.
•Using the mounting screws (4 pcs.) for the rack mount-
ing brackets, fix them firmly.
3. Install the unit in the rack.
•Fix the unit firmly with the rack mounting screws (4
pcs.).
INSTALLATION IN THE RACK
Remove the rubber legs.
Mounting screws for rack mounting brackets 
(accessories)
 Rack mounting brackets (accessories)...

64
MANAGEMENT OF USERS/HOSTS
It is necessary in advance to register users and PCs (hosts) who access this unit via a network such as LAN.
Up to 32 users and 8 hosts can be registered.
The following information can be registered as user information and host information.
For the set items above, the unit will work differently depending on whether the unit is operated directly or operated via a net-
work as follows.
●When the unit is operated directly
Operate using the monitor connected with this unit....

65
Notes:
•When a user is operating this unit using a PS·Data compatible controller, this user can log in automatically as a PSD user
set for PSD User of System on the SETUP MENU.
•When a user logged in this unit using a PS·Data compatible controller and didn’t operate the unit for around 2 minutes, this
PSD user will be forced to log out.
•When ON is selected for Auto Login of System, a user who logged in automatically will be forced to log out if this user
didn’t operate the unit for around 30...

66
OPERATING THE UNIT FOR THE FIRST TIME
Important:
When connecting an optional extension unit (the WJ-
HDE300 series), turn on the power of the extension unit
before turning the power of this unit on.
zTurn on the POWER switch.
xPress the SET button during the system check
complete window is displayed.
The HDD DISK MENU window will be displayed.
Perform the settings with this menu according to your
needs.
Refer to page 16 for further information.
After completing the settings, press any button to close...

67
Preparation for maintenance (HDD
replacement, installation, etc.)
When maintaining (HDD replacement, installation, etc.)
without turning the power of the unit off, carry out the follow-
ing operation after setting the HDD SAFETY MODE to ON.
(The default setting is ON.)
This can be set on the Disk Info menu of Maintenance.
Refer to page 93 for further information.
Important:
After completing the installation or the maintenance, set
the HDD SAFETY MODE to OFF.
Do the following before starting operation...

68
When the system check has been completed, the HDD
SAFETY MODE window (as shown below) will be displayed.
The camera selection buttons on the front panel (1 - 16 for
the WJ-HD316, 1 - 9, 0 for the WJ-HD309) will light green
and orange (for 2 seconds each) alternately.
Move the cursor to OFF using the arrows button and press
the SET button.
The unit will restart automatically and the system check
complete window will be displayed.
When the system check complete window is displayed,
carry out the...

69
■Connections when the unit is used independently
An example of connections is shown below when the unit is used independently.
Important:
•The power plug should be connected last.
•When connecting combination cameras , connect them to the video input connectors 1 - 8 when using the WJ-HD316 or
1- 6 when using the WJ-HD309 (for coaxial communication).
● Examples of connections
CONNECTIONS
MicrophoneNote: If the DATA and RS485 ports are not 
used, the mode switches should be used as 
illustrated.
1 2...

70
■ Connections with an extension unit
An example of connections is shown below when the unit is used together with an optional extension unit.
This unit can be connected with up to seven extension units.
Connect the EXT IN port on the rear panel of the extension unit and the EXT STORAGE port on the rear panel of this unit using
the cable provided with the optional extension unit.
Important:
•Use the cable provided with the optional extension unit.
•Fix the cables with the cable clamp (provided with...